Видео

I had no problems with the game crashing.

@@8YourWorstNightmare. You'll be able to play games, but don't expect any performance miracles. The amount of RAM is also important.

@kaurazmaj 20 GB RAM

@@8YourWorstNightmare. The game can take up over 20GB of RAM. Test it and see how the game behaves.

@@lifedroid Considering how old the components are and that the GPU has lost its driver optimization for newer games, it's GREAT. The only thing missing here is a stronger GPU.

@@martinrakovicky1189 What motherboard are you using?

@kaurazmaj gigabyte z97x gaming 3

@@jfc1414 No, the GPU is not overclocked. Those are its stock settings.

It loads every time you start the game.

@kaurazmaj thank you only takes under 3 min to launch after the first time which was like 30 min.

@@arisen2428 Yes, but it loads every time instead of immediately starting the game. Whereas with other games it loads once and that's it.

@@H0und0fHircin3 What RX480 model do you have? Not all RX480 cards are the same and they all work at the same clocks. Mine is BETTER than many RX580 models. Do you have enough RAM?

@@arisen2428 I use one of the cheaper coolers and my temperatures don't even reach 80°. 80-85° is the limit you shouldn't exceed if you want to extend the lifespan of your processor. If you were to run a stress test, you would reach that temperature. No application can put as much strain on a processor in everyday use and gaming as a stress test. I test my computer in games and everyday tasks 24/7 and never have any problems. It helps a lot that 1,220v is enough for my processor to run stably at 4.7 GHz.

@@arisen2428 At one time I used 4.5 and 4.6 GHz with only 1.200v voltage. There were no problems and the temperatures were also lower. That was not enough for me considering the temperatures and stability so I went to 4.7 GHz. That is my limit for now with this current cooler. 🤫

@@arisen2428 This is my CPU cooler. www.idcooling.com/product/detail?id=411&name=FROZN%20A410%20BLACK

@@kaurazmaj I have my set at 1.250 v I should try it at 1.200 v see if that improves the temperature, yea only my temp go the near to high 80c when stress testing but not while gaming just near the high 60c low 70c.

Now I temp are low after delid the cpu change the paste in the die of the cpu, now with stress testing it stays under 70c.

yea its need a ssd and a bit more ram like 24gb or 32gb good gpu rtx 2060 rx 6600

@@gamecinema01 Не очень хороший FPS, так как игра нуждается в дополнительных исправлениях.

@@kaurazmaj у меня такой же комп, только проц от АМД, новее и мощнее, карта пыхтит и еле что выдаёт

@@kaurazmaj ОЗУ тоже быстрее чем у тебя, но игра не вывозит

@@gamecinema01 Какая у вас конфигурация? Если вы используете Windows 10, у меня была аналогичная проблема с игрой Silent Hill 2 Remake. Я не смог запустить его в dx12, а только в режиме dx11, но там у меня была поддержка только fsr1. К тому времени, когда я перешел на Windows 11, игра работала без проблем в dx12 и с поддержкой fsr3 и fg.

@@kaurazmaj amd ryzen 5 2600, 16 gb ram ddr4 3200, rx 480 8 gb, ssd 1 tb

I'm using Windows 11 now only because Microsoft hasn't and probably won't update DX in Windows 10, which is why Windows 11 is a better choice for gaming. An SSD is needed for gaming because of the loading speed, because with a regular HDD you'll have to wait until you get into the game. As for the 16 GB RAM, you'll have to test it yourself, and if you look at the section shown in the video, you'll see that the RAM is quite loaded, ranging from 16-25 GB.

Did you test is?

Processors from the Devil's Canyon series belong to the fourth generation of Intel Core processors and include the Intel Core i5-4690K and Intel Core i7-4790K models. Those models seem to have been forged by the Devil himself, so they cope so well with newer games. It seems that even time cannot beat them.

@@kaurazmaj I agree with you completely these older intel CPUs when overclocked just won't die. I had a 4930k overclocked before I went x99 and that was faster than my friends much newer Ryzen 5 2600 (Which annoyed him) I really don't see the need to upgrade my 5960x keeps my 4060ti at 99% usage in all the games I play.

@@jonesy3000 Exactly. On my system, the graphics card is the weakest link. I don't want to change it for so long until it just becomes unusable. And it copes very well with new games, considering that the driver support for optimization for new games is lost. These processors just need to be given adequate graphics, in my case it would be RX6700XT or RTX 3060ti/3070. Then the STRENGTH will come to the fore. Although the RTX4060ti is also not a bad card.

Yes. For gaming, the graphics card is much more important than the processor itself. But as you can see in the video I made, it's hungry for RAM.

Well the minimum is a 7700k which is a 4c 8t processor so 4790k work well just need better GPU and good amount of ram.

@@arisen2428 You're right. An overclocked i7-4790k at 4.7 GHz is on par with an i7-7700k at stock settings.

@@Dev-tf9zj The i7-7700k would be 5-15% faster if both were overclocked to 5.0 GHz. i7-4790k: Aim for a stable overclock of up to 4.7-4.8 GHz for 24/7 use with air cooling. More than that can cause overheating and instability. i7-7700k: Aim for 5.0 GHz only if the processor is delidded and you use premium cooling. Without delid, 4.8-4.9 GHz is more realistic.

24.9.1

You probably have something not set up correctly. Whether it is the BIOS or the operating system itself, background processes, there are several possible causes. I tested this with a worse processor and ram overclock. CPU: 4.6GHz RAM: 2200 MHz. I think that the result might be even better now, because my CPU is now overclocked: 4.7 GHz and RAM: 2400 MHz

My processor is overclocked to 4.7 GHz, which would mean about 15-20% better performance than your i7-4790 in applications that maximally load the cpu. I think you will be able to play the game without any problems.

@kaurazmaj thanks man

@@siriusj7987 delta-force-hawk-ops-cn.en.uptodown.com/android/download

The game is just DESPERATELY optimized. RX480 has support for dx12 and can also work with fsr3. While with this game it is impossible to run it in dx12 or use fsr3 and FG. In my opinion, this is a category of GARBAGE.

Probably because you want to run the game on dx12, which doesn't work. Run it in dx11 and you shouldn't have any problems.

If you haven't looked at the better settings I set in the game, then try again and you'll see that there is no fps limit. From 5:59 it is clear that the problem is in the "crack" itself. As soon as I replaced the other version the fps improved.

@@kaurazmaj even the legit game is so poorly optimized on pc.

On my board, I can't overclock the ram memory higher than 2400 MHz, that seems to be the maximum for my motherboard. My board supports RAM overclocking up to 3100+ MHz. There is a 6-phase power supply on my motherboard. Motherboards with 8 or 12 phase power supply have even better potential for overclocking.

@@kaurazmaj Alright, i got the corsiar vengeance too with a Asus Z87 i try it today

@@AlexanderWagner264 If you know the full name of the motherboard I can see what you can expect.

@@AlexanderWagner264 ASUS Z87-A has an 8-phase voltage section ASUS Z87-Pro has a 12 phase voltage section ASUS Z87-Plus has an 8-phase voltage section ASUS Z87 Maximus VI Hero has an 8-phase voltage section

@@AlexanderWagner264 You can try at 2600 MHz with latencies CL12-14-14-38 and a voltage of 1,700v. For ddr3 memory, it is not recommended to exceed the voltage of 1,650v because you reduce the lifespan of the memory or you will degrade it. But if you are only interested in stability testing, you can try it, although I would not exceed the voltage of 1,650v for 24/7 computer use.

For video recording, I use the AMD recorder, which is in the graphics card driver itself. I don't use an external recorder. I use MSI Afterburner to display component load.

@@kaurazmaj thanks, i see that it works very well. My question was because many people say that only nvidia cards could record and stream in a good way.

@@andresuribe8929 I don't trust anyone until I test and try it myself. We live in a world of LIARS. I usually shoot in 1440p resolution and I set the video bit rate to 60 Mb/s. By increasing the bit rate, you get even better video quality, but you also increase the size of the video file itself in GB. It all depends on what you want to record and in what quality.

Truth. Also take into account that the graphics card lost support for driver optimization for new games, and to make everything even sweeter, the game developers decided that the graphics card that has support for dx12 and fsr3 is not able to do it because only fsr 1 has enabled it anymore. considering that it is a native resolution without scaling, it is still good considering that the drivers are "just enough to exist". The fps is higher than 25-30, you probably concluded that from the scenes that are locked in 30 fps.

max settings lol

@@kaurazmaj actually its quiet impressive that they just released the 24.9.1 recently for the polaris cards, it doesnt change much but i feel like they still care about these cards because of the big community that are using it!

@@Jrdn07 yea bro runs pretty good since capcom did a great job on the optimization and all, u can check videos on the youtube

@@nkzbda It's true that they released a new driver for Polaris and Vega cards 24.9.1, but as I told you before, there is no more "fine tuning" or optimization for newer games as it was before. These are now drivers with security patches only.

I expected a worse experience considering that it is in UE5.

Motion blur is set to default (high), so it's not turned off and that's the reason for the blur in the video and youtube compression doesn't like it. Change the video quality from auto to 1440p.

Something is probably not set up correctly on your computer. I have overclocked the processor, ram memory and for some games I additionally overclock the graphics card if I think it needs a little more power. All UNNECESSARY processes on Windows have been turned off, which additionally contributes to better performance, and the system itself must be CLEAN.

@@kaurazmaj I have ReviOS.. So it's good for performance. I settet power on Performance have 750 +80 bronze BeQuit cpu Its 4,20 clock.

@@Dremora MY SPEC: CPU: i7-4790K (4.7 GHz OC) 1.220v CPU Cooler: ID-COOLING FROZN A410 Black GPU: PowerColor RX480 Red Devil 8 GB MBO: ASRock Z97 Pro3 RAM: Corsair Vengeance 32GB 1600 MHz CL9-9-9-24 (4*8GB) XMP 1.3 2133 MHz CL12-12-12-28 1.650v OC PSU: EVGA 600W 80+ I think it is now clearer to you why my performance is better.

@@kaurazmaj but how it is sk smooth? My game feels like 30 - 20 fps..

@@Dremora There is a big difference when your processor works at 4.2 GHz and does not have boost 4.4 GHz and mine which is overclocked to 4.7 GHz. Not to mention other things.

8 GB

I have no intention of changing that cpu for at least another 5-6 years. It just needs a stronger graphics card than the current one. RTX3070 or RX6700XT would be quite enough for him to maintain a good balance. Change the video quality from auto to 1440p.

I don't have the game yet, but I recorded a benchmark.

Red Devil! In my opinion, this graphics card is better than many RX580 models.

Have you tried 2400MHz CL11-13-13-35-CR2 1.650v?

@@kaurazmaji tried but it still not working, maybe other latency for 2400Mhz ?

Attempt to increase latency to CL11-14-14-38. I don't have your copy of the memory so I don't know what latency would suit it best and how well it is able to stay at that frequency. My samples are 2x8 GB CMZ8GX3MA1600C9 and 2x8 GB CMZ16GX3M2A1600C9. So my total 32 GB work in dual chanell mode at a frequency of 2400 MHz with latency CL11-13-13-35-CR2 with a voltage of 1,650v without problems.

It's just a benchmark that showed absolutely nothing but levels. There is no bottleneck between the i7-4790k and the RX480. The RX480 does not receive new driver updates for newer games. It probably creates a negative effect on the gpu.

I do not believe that these performances will remain because this is only a representation of the level design, no activities or combat is shown, which is more complex than rendering an empty map.

I guess you're not very lucky when it comes to the silicon lottery. Your processor obviously requires a much higher voltage to maintain stability. I suggest you keep it at 4.7 GHz with a voltage of 1.220v. With this, you reduce unnecessary heating, the voltage is low and it maintains stability.

The i7-3770 is a much weaker processor than the i7-4790k + overclocked to 4.7 GHz. I think that the GPU has a bigger role here.

In the first minutes, you have the settings set in the game.

You should probably change the thermal paste on your gpu. How much did you set the vcore for the gpu when overclocking to 1400 MHz? You should be able to work at 1400 Mhz without any problems. Try these settings. Core Voltage (mV) : +50 Power Limit (%) : +50 Temp.Limit (°C) : 90 Core Clock (MHz): 1400 Memory Clock (MHz): 2125 Confirm changes or save them to a certain number so you don't have to manually adjust the values ​​every time.