- Видео 220
- Просмотров 112 329
Lost Electrons
Канада
Добавлен 22 июл 2018
I'm just a guy trying to share some knowledge. Sometimes I make mistakes, sometimes I get it right. Follow me along this adventure.
[Let's Play!] Final Fantasy XIV - Dun Scaith as a Samurai
That time I decided to be a Samurai in Final Fantasy 14, and ran through one of the Heavensward Alliance Raids - Dun Scaith
Просмотров: 6
Видео
[Let's Play!] Final Fantasy XIV - The Weeping City of Mhach as a Red Mage
Просмотров 16День назад
That time I decided to be a Red Mage in Final Fantasy 14, and ran through one of the Heavensward Alliance Raids - The Weeping City of Mhach.
[Let's Play!] Final Fantasy XIV - The Void Ark as a Samurai
Просмотров 1414 дней назад
That time I decided to be a Samurai in Final Fantasy 14, and ran through one of the Heavensward Alliance Raids - The Void Ark.
[Let's Play!] Final Fantasy XIV - Alexander: The Soul of the Creator as an Astrologian
Просмотров 1621 день назад
That time I decided to be an Astrologian in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Soul of the Creator.
[Let's Play!] Final Fantasy XIV - Alexander: The Heart of the Creator as an Astrologian
Просмотров 6Месяц назад
That time I decided to be an Astrologian in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Heart of the Creator.
[Let's Play!] Final Fantasy XIV - Alexander: The Breath of the Creator as an Astrologian
Просмотров 29Месяц назад
That time I decided to be an Astrologian in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Breath of the Creator.
[Let's Play!] Final Fantasy XIV - Alexander: The Eyes of the Creator as an Astrologian
Просмотров 4Месяц назад
That time I decided to be an Astrologian in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Eyes of the Creator.
[Let's Play!] Final Fantasy XIV - Yuweyawata Field Station as a Red Mage
Просмотров 29Месяц назад
That time I decided to be a Red Mage in Final Fantasy 14, and ran through one of the Post-Dawntrail Dungeons - Yuweyawata Field Station.
[Let's Play!] Final Fantasy XIV - Alexander: The Burden of the Son as an Astrologian
Просмотров 11Месяц назад
That time I decided to be an Astrologian in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Burden of the Son.
[Let's Play!] Final Fantasy XIV - Alexander: The Arm of the Son as a Dragoon
Просмотров 312 месяца назад
That time I decided to be a Dragoon in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Arm of the Son
[Let's Play!] Final Fantasy XIV - Alexander: The Cuff of the Son as a Samurai
Просмотров 72 месяца назад
That time I decided to be a Samurai in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Cuff of the Son
[Let's Play!] Final Fantasy XIV - Alexander: The Fist of the Son as an Astrologian
Просмотров 52 месяца назад
That time I decided to be an Astrologian in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Fist of the Son
[Let's Play!] Final Fantasy XIV - Alexander: The Burden of the Father as an Astrologian
Просмотров 122 месяца назад
That time I decided to be an Astrologian in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Burden of the Father
[Let's Play!] Final Fantasy XIV - Alexander: The Arm of the Father as an Astrologian
Просмотров 102 месяца назад
That time I decided to be an Astrologian in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Arm of the Father
[Let's Play!] Final Fantasy XIV - Alexander: The Cuff of the Father as a Samurai
Просмотров 173 месяца назад
That time I decided to be a Samurai in Final Fantasy 14, and ran through one of the Heavensward Normal Raids - Alexander: The Cuff of the Father
[Let's Play!] Final Fantasy XIV - Alexander: The Fist of the Father as a Red Mage
Просмотров 153 месяца назад
[Let's Play!] Final Fantasy XIV - Alexander: The Fist of the Father as a Red Mage
[Let's Play!] Final Fantasy XIV - Sohm Al (Hard) as a Gunbreaker
Просмотров 73 месяца назад
[Let's Play!] Final Fantasy XIV - Sohm Al (Hard) as a Gunbreaker
[Let's Play!] Final Fantasy XIV - Baelsar's Wall as a Gunbreaker
Просмотров 53 месяца назад
[Let's Play!] Final Fantasy XIV - Baelsar's Wall as a Gunbreaker
[Let's Play!] Final Fantasy XIV - The Great Gubal Library (Hard) as a Gunbreaker
Просмотров 74 месяца назад
[Let's Play!] Final Fantasy XIV - The Great Gubal Library (Hard) as a Gunbreaker
[Let's Play!] Final Fantasy XIV - Xelphatol as a Gunbreaker
Просмотров 94 месяца назад
[Let's Play!] Final Fantasy XIV - Xelphatol as a Gunbreaker
[Let's Play!] Final Fantasy XIV - Hullbreaker Isle (Hard) as a Gunbreaker
Просмотров 64 месяца назад
[Let's Play!] Final Fantasy XIV - Hullbreaker Isle (Hard) as a Gunbreaker
[Let's Play!] Final Fantasy XIV - Sohr Kai as a Gunbreaker
Просмотров 7804 месяца назад
[Let's Play!] Final Fantasy XIV - Sohr Kai as a Gunbreaker
[Let's Play!] Final Fantasy XIV - The Lost City of Amdapor (Hard) as a Gunbreaker
Просмотров 345 месяцев назад
[Let's Play!] Final Fantasy XIV - The Lost City of Amdapor (Hard) as a Gunbreaker
[Let's Play!] Final Fantasy XIV - AAC Light-heavyweight M4 as a Red Mage
Просмотров 405 месяцев назад
[Let's Play!] Final Fantasy XIV - AAC Light-heavyweight M4 as a Red Mage
[Let's Play!] Final Fantasy XIV - The Strayborough Deadwalk as a Red Mage
Просмотров 1265 месяцев назад
[Let's Play!] Final Fantasy XIV - The Strayborough Deadwalk as a Red Mage
[Let's Play!] Final Fantasy XIV - AAC Light-heavyweight M3 as a Red Mage
Просмотров 1195 месяцев назад
[Let's Play!] Final Fantasy XIV - AAC Light-heavyweight M3 as a Red Mage
[Let's Play!] Final Fantasy XIV - The Antitower as a Gunbreaker
Просмотров 495 месяцев назад
[Let's Play!] Final Fantasy XIV - The Antitower as a Gunbreaker
[Let's Play!] Final Fantasy XIV - AAC Light-heavyweight M2 as a Red Mage
Просмотров 6245 месяцев назад
[Let's Play!] Final Fantasy XIV - AAC Light-heavyweight M2 as a Red Mage
[Let's Play!] Final Fantasy XIV - AAC Light-heavyweight M1 as a Red Mage
Просмотров 2365 месяцев назад
[Let's Play!] Final Fantasy XIV - AAC Light-heavyweight M1 as a Red Mage
[Let's Play!] Final Fantasy XIV - Tender Valley as a Red Mage
Просмотров 1385 месяцев назад
[Let's Play!] Final Fantasy XIV - Tender Valley as a Red Mage
I would pay GOOD MONEY for a REMAKE of this GAME!!!
I would pay more for a remake of this game than all the monies I've spent (and will continue to spend) on the FF7 Remake series
NULL Informationsgehalt!
Well thank god it's just the arm.
Touching a metal box without ground he just did shoddy solderingwork in while plugging in mains and then warning people about 12V live. Priceless.
You're 100% correct. Please tag me in a video of your own and go into full detail about everything I did incorrectly. Kinda surprised you didn't mention I wasn't using a fume extractor for the lead-based solder I was using as well.
Did you took off that little spring from The back of The cylinder? And why
it adds better response with engaging the clutch and doesn't make it feel so "squishy"
How is that place floating?
Magic probably. Or moogles
The raw Aether Rifts from the last Calamity, as well as the Crystal at the summit of Sohm Al provided enough unharnessed energy to tear apart the ground and cause the lands to float in the air around Abalathia's Spine, as well as around the Churning Mists
lol i swear ppl were launching themselves off the deck on purpose 😂 woulda been a good run if u had some help...gg
It also feels like once the healers see a Red Mage in the roster, they don't even bother trying to help rez unless the guy's been down for more than 20 seconds 😂
i feel ur pain...as a long time rdm main i feel it all too well. n isnt it always during our burst too? sry bruh ur gonna hafta lay there a bit longer 😂
What intake and tune do you have for the tiburon?
It's a cheap non-brand eBay Cold Air Intake and factory tune.
Did you have a check engine light before you cleaned it? Is that why you cleaned it? I gave a p0102 maf code. I'm wondering if this would fix it?
Mine was fairly intermittent coming on with that code, depending on the outside temperature - if it was a hot day (something like +27°C or warmer), it would come on once my engine got up to running temperature and I was driving it a little harder than normal (because fun times). Otherwise I didn't really have an issue with check engine light. Never did see it come on with that specific code after I cleaned it.
It still seems challenging even at higher level like this....
Super-bosses are challenging, for sure, especially when the game takes away half of your arsenal in battle (magic)
@@lostelectrons recently I did beat Lapis at level 49-50 with all 3 using luminous jewel / light talisman for increasing light element defence & defender chain for higher blocking rate (for Vahn - Noa - Gala) Vahn uses Mettle Goblet for always maxing its AP (Non stop miracle arts) Noa uses War God Icon for attacking twice in a row (Bash Ra-Seru / Left for multiplying damage after enhanced by Mt. Rikuroa's Genesis Tree) Gala uses Speed Chain for assuring the first turn (For designated Healing Berry user or Point Card at first turn and some points in battle) Good luck!
🤷 *Promo SM*
If i can play it again..really miss it
you can play it in a browser
This game was my childhood
pajako ndak tukang service kodoh, dari caro manyolder e se lah ketauan.
Played with these PC power supplies myself, well some years ago, and what I noted then was that the supplies used the 5V output to regulate for varying load which leads to some poor regulation if the 12V output is loaded and the 5V not loaded IE the 12V output will 'sag' as the load increases because it's not being 'seen' by the controller chip. If the 5V output is loaded and 12V unloaded then the 12V voltage will rise as the controller PWM adjusts to maintain the 5V target. I'm saying it does work but it's not precision by any means. I'd also add a cautionary note about handling the PCB without ensuring the primary side capacitors are fully discharged first - never rely on the design including discharge resistors or that they are actually functional even if they do exist!
bruh danton in the hero composition almost one shot me, he did 578 damage☠️,not sure why he didnt do his all out attack on you
I have P0171 code witches mean that the engine running to lean. I will try to clean the air flow sensor and hope that's help solve the problem. I will keep you updated 👍
the sound is really distorted too
Thank you for the feedback, but I am not sure what you mean by this. The boss has a distorted voice, if that is what you are talking about, but it is supposed to be distorted. The audio sounds normal to me when I watch it on my phone.
@@lostelectrons there are some weird distorted echos around. 10:03 - 10:05 its pretty obvious
whys the video so dark
OBS compression
You saved me , thanks a lot
Hey nice video, did it make any difference?
👉 Promo>SM
I know this is three years old but, in case you haven't yet learned this, the hot lead of the power cord always, Always, ALWAYS goes, directly, to the switch First. Otherwise, the circuit will have power on it at all times. Very dangerous. That charger was incorrectly wired, from the factory. No matter what you are working on, power goes to the switch First. 😁✌🖖
Thank you for pointing that out, however this specific battery charger doesn't actually turn on and off by the switch, it just switches between 2 amp trickle charge, 12 amp charge, and 75 amp boost (you can see that around the 12:50 mark in the video). So there is supposed to have power everywhere in there the second it is plugged into a power source. All the switch does is "turn on" other windings inside the transformer to step up the "power" by providing additional returns for the current to travel through. If you switch the hot in this case, you wouldn't get a smooth step-up transition, and it would be far more harmful to the transformer than just switching the neutrals. I do agree that there should have been an isolating switch on the hot before it got to the transformer, but that's not how this device was made, probably because it's not meant to be plugged into a power source for extended periods of time where an isolation switch would be needed, since it is just a home charger that might be used once a year then put back in storage.
for this you really need to be an intellectual,
Great video to look at now that the game is finally on PS premium. Thank you boss.
What model is that laptop ?
it is a Dell Latitude 5580
Gracias por la exposición
i was wondering if there is any way to tell how many watts a power supply would be making at 12 volt im trying to use it to power a car amp i got a 600 wat amp working fine i just dont wanna push it and blow the power supply or worse
i know cutting them apart is not so highly looked at and alot of people will say not to do but how do i know how many amps its putting out do i need a multi meter if it helps its a old dell power supply its 405 watts i think
@@thekillerexe-ur3yy if you can still see the sticker label, it should tell you under the DC Output rating what the Max Watts is. it should also tell you what kind of current (amps) it will do, both are limiting factors on what the power supply will do. if you want to do the math on it, or if it doesnt show the watts, you can calculate it by (Amps) X (Volts)
👇 𝐩𝓻Ỗ𝓂Ø𝓈M
Thank you
supper helpfully video thank you so much!!!!
did not know the 2.7s came in 5 speed, here in the UK they are 6 speed
Sir what is the details of your intake please, I own exactly the same model.
To be totally honest, I got the cheapest Cold Air Intake I could find on Ebay that would fit my car 🤣 I think it was $85 shipped to my door
Why did the power supply shuts off after 10 seconds of being on?
At the end? I turned it off by the switch
Why play awful music when you are trying to explain what you are doing, defiantly a thums down
Have you finished it yet?:
extra karma points for doing the custom intake right. putting the damn filter in the hot air stream makes it worse then OE system people. Cut it out, do it like this guy
Hey you should probly disconnect the negative off you battery might burn out.
The MAF has a quick disconnect on it and the pins are recessed into the housing. Disconnecting the battery would be pointless for the short job this is.
What kind of tube or house are you using to bleed the clutch? The people at the auto stores look at me like I'm crazy... But no one has what I'm looking for.
I just had a chunk of 1/4" clear PVC tubing laying around. It doesn't matter what it's made of, as long as it's clear (so you can see the fluid coming out) and 1/4" diameter to fit snugly over the bleed nipple
So you just wiped off your speakers? Some description of the repair would be much appreciated. I’m having a very similar issue. Thanks
Basically, yea. I didn't want to just take a cloth to wipe off the speakers, incase I tore a hole in them, so I used a magnetized screwdriver to collect the metal fragments being pulled toward the speaker magnet
@@lostelectrons thanks!!! That was very helpful! I made sure to get all metal fragment carefully removed with a screwdriver and a soft toothbrush but it still sounds distorted on my left speaker. Might have to replace since I have already tried different sound settings and updating audio drivers. Thanks for your help though!
You made me so nervous with that uncapped bottle of fluid sitting on the battery with you reaching all around it, back and forth. I would have knocked that thing over, for sure!! LOL!
Just got a 2005 2.7 V6 and the clutch is just not engaging well, so this will really help, already got the parts, just waiting for warmer weather ;-)
HI my friend i have a nightmare here. my car was in my garage a open garage about 3 months and i forget to cover the holes of the slave and the master cylinder. men i find a technician and put my new clutch and now the pedal.didnt want to go down entirely. i can't start the engine because the pedal didnt hit the switch its like very close by mm to the switch so the mechanic came and adjust the switch and start the engine the car its running didn't have shifting problem etc but its weird because the pedal didn't want to go down. i know this its not good and i didn't use the car after this. did you believed the slave or master was damage because was 3 months leave in my open garage without cover it? i order new ones and put my fe on this its not works i will sell it
I'm no automotive mechanic, and I am sort of having a hard time understanding the issue, but it sounds like you got a new clutch installed? There's that linkage that goes to the clutch fork inside that attaches to the Slave Cylinder, and that needs to be pushed backwards (towards the cab) until it has a noticeable "click" into position before attaching to the slave
Great work man
My speakers sounds really low.. and makes horrible noises. Do you think I have the same problem ? They stopped working 3 months after I bought my laptop.
It's possible, but there's several other things that may be happening as well... 1. The speakers might be blown. 2. Their wiring connection to the motherboard might be damaged or loose. 3. Incorrect audio drivers were installed.
@@lostelectrons I tried installing a lot of drivers, I reinstalled Windows. I have another workmate whit the same laptop and he has the same issue.
Try pulling your systems apart and physically inspecting the speakers and wiring harnesses for damages. Could have tears in the cones, crushed wires, misaligned pins, etc. If the computers were bought brand new, you should still have warranty on them after only 3 months.
Have problem. Speak. Me charlea. Compre nueva y sigue igual.
Banshee bolt 😂😂 good work though
So I've noticed that you replaced the original master cylinder with a different one (41610-2C100 vs 41610-2C500) Was there any difference besides where the clutch fluid reservoir connects to the cylinder?
Zero difference in functionality or feel. It's a "genuine" Hyundai part, and the vast majority of Hyundai parts are interchangeable, just like Subaru. Some might just need some very small modifications to fit (rotating the reservoir hose 45 degrees, for example).
@@lostelectrons Yup, could've guessed.. Just makes me wonder why Hyundai keeps changing these parts for no reason... Different part numbers for tiburons between 2001-2003 and between 2004-2007 (only it's 5 times harder to find the one I specifically have originally of course). Thanks!
@@Sheppards1984 my guess would be different engineers, or trying to make multiple parts fit multiple different vehicles of that specific time frame. Try searching RockAuto.com for specific parts, they seem to have the vast majority available and also show you similar parts that will fit/work for your specific year/model
@@lostelectrons Makes sense. Though I'm from Hungary, so I'll have to make do with what I can find here :) (shipping from the US is not an option at the moment, as I need the part right away) but thanks anyway!
Thanks a lot
After you shifted gears would your car do a wined up before replacing them two parts?
Not really. Was more just hard to get into and out of gear, like the clutch wasn't fully disengaged when the pedal was pressed in. More an issue when trying to go into gear. Reverse was very hard to get into