Видео

i heard heavy clutch weights will help top end

The sound is so cool! What jetting sizes do you have in this bike?

Your videos are very well done, you should continue making them

Underrated channel. This is craftsmen level stuff. Lets see some more restorations!

This saved my life

This actually helps alot! tank you!

Just did the rear blinker mod. Have a trick for you. Pull the brake light cover, the floor of the light pulls right out and shines on the plate

WHERE YOU GET THAT PEG

my old scooter was bone stock but de restricted and did 50mph "2012 scarabeo piaggio"

2008 bugeye ebay 70cc head and 88$ fly pig exhoust 49 mph stock variator and clutch doing full stage6 street race with crank waiting on yasuni r exhoust

What kind of spray was that

Mr gowdy?

One thing that I noticed when you were putting the pipe on, you didn't take the restrictor out of the silencer of your pipe, that could help you a lot as well.

The things are showing it down. There's also a restrictor in the muffler. You need to take it out. There are videos of how on RUclips. Also, you need a bigger barn. I would suggest a 21mm DelOrto with a 92 main jet and cone air filter, and you need to raise the grading at the back wheel. Mine does 67mph and still pulls wheelies accidently of the line.

Put some Michelin boppers on it to add more speed. Chunky tires are so slow

Buy a yasuni r its way better than the yasuni z

Do you have both the restrictions out of the yasuni cause it has 2

donde consigo el escape yasuni ? 🔥

i have an 02 zuma with the stock top end, some cvt work and a custom pipe like the yasuni you picked up. it hits 48mph on flat roads against the wind. im 160 lbs and everything else on it is bone stock

If raced there befor

Whath carburador you use

Hey buddy! I have a question, do you know if i keep my 2012 tank, the side fender will fit if i buy 2014 or 2019 fender? Thanks man and very nice projets!! 👌🤙🤙

Time to go LC if you're worried about head-temps, pretty inexpensive since you can just buy Aerox/SR50 LC parts.

i got simmular motor on my malaguti crosser cr1 i got a 70ccm malossi kit for it malossi fly clutch i keept the clutch spring stock i am running 3x4.5g and 3x7g rollers in the malossi multivar my top speed was 80km/h

One bolt and engine comes out of bike. Instruction say cylinder and rings should be assembled dry.

i have same scooter 08 2 stroke 10k miles 36mph 43 down hill stock

What happen to your channel

i have the same model. So it has a leo vince zx pipe but the mix pump is still on itbad does it have to be to weld the piston to the cylinder?

Mine is just like the one in the video and it only has one headlight that comes on and if you hit the switch the other headlight comes on is that the way they are made?

is it safe to wash engine like that?

Ремень длиннее нужен

its taking way too many rpms you sdhould get a new sports variator and put in some bigger rollers

What app are you using? Thanks

Anything ever go wrong with the bike ?

throttle mod you should be hitting 60 plus . Seems like your not letting it open up all the way which is why your stuck in the 40s mph.

weak !!! my 49cc goes 53mph with an exhaust and throttle mod and removing the governor - I weight 215 also

What ratio are you mixing now with that 70 Big Bore Kit? And what spark plug do you run now please and thank you. I'm building exactly the same thing right now is why I asked

Awesome stuff buddy keep posting man

bro i was 14 when i got a yahama bws and same year put 70cc on and mine didnt blow up and now im 15 doing it again for the 4th time this time with a amazon 70cc but with 21mm carb and 8 inch pipe

Hey man just curious I have same carb and have some issues when truck is off and I look down in carb should gas come out of jet when I press throttle linkage?

did you run it with a airbox?

I wired my turn signals directly with the original sockets since i’ve done the same with a Yamaha Razz for the JDM tail light & whenever I brake the turn signals cancel out? Is the turn signal relay/resistor necessary & will it help fix that problem? I have the same Bugeye Zuma as well

how much psi you put in your tires

the more lube the better..........sage life advice.

Nice shirt love it Jody Holcomb Hillsboro Ohio I kinda gave up on Jesus but I said to my self he did not give up on me so don't give up he is love.can u send me a free shirt like yours XXL Hillsboro Ohio. Nice I got 2 scooters thanks for let me no I need parts

So cool. Do you think that this would work on my 2015 150sx??

awesome build! brought back great memories of me. i bought a 1971 same color, with my paper route money!

Looking at Ranger content right now (just got home like 5 hours ago) from looking at a 1993 Ford Ranger 5 speed manual 4X4 nice truck man

Increase the pump delivery instead of deleting it

Whats cool about a stuffed piston