Mr 12v
Mr 12v
  • Видео 8
  • Просмотров 215 962
BMW Connected Ride Navigator Software Update V1.0.1
Just a quick video now the software update has been released. this has fixed many problems and really seems to have made this device much better. I'll know more once I have done some more testing but its winter here so I'm not out much at the moment!
Просмотров: 4 984

Видео

BMW Motorrad Connected Ride Navigator out on the bike
Просмотров 23 тыс.Год назад
a quick view on how the connected ride navigator looks and works on the bike. overall its a nice clear screen that's very easy to read and the screen changes are very quick so it feels quite slick. This is an early software version and still in development so there will likely be some changes before its release in early November. *Update 09/12/23 new software installed on the device - ruclips.n...
BMW Motorrad Connected Ride Navigator Initial Setup
Просмотров 19 тыс.Год назад
just a quick run through the initial setup of the Connected Ride Navigator when you first turn the device on. Connecting to Wifi and logging in with your BMW ID. I have also filmed the unit out on the bike, you can view that one here: ruclips.net/video/CfDOjZwRHKk/видео.html
Unboxing of the new BMW Motorrad Connected Ride Navigator
Просмотров 18 тыс.Год назад
I just wanted to share a little info on the new BMW Motorrad Connected Ride Navigator as there isnt too much information available on the internet currently. I hope this goes some way to showing you what the unit is and what it looks like. You can also check out my next video on setting up here: ruclips.net/video/jipDO92ZTyk/видео.html
Building a 12v Car Battery monitor for Home Assistant with MQTT, NodeMCU, Tasmota, ESP8266, Arduino
Просмотров 14 тыс.4 года назад
Here is a template example for home assistant as requested - platform: template sensors: battery_v1: friendly_name: "Voltage Monitor 1" unit_of_measurement: 'volts' value_template: "{{ ((states('sensor.voltagesensor1_analog_a0')|float - 45 ) / 1024 * 3.3 * 5)|round (2) }}" I couldn't find anything on the market that would monitor a 12v battery and let me integrate it into Home Assistant so I co...
Chicken House automatic door Opener/Closer using a car aerial and two CN101a 12 Volt Timers
Просмотров 1,1 тыс.4 года назад
This is quite an old video but I thought it worth sharing, it was my take on the automatic chicken door opener/closer that you can find on the internet. Made with a motorcycle battery, 2 12v timers and a car aerial. All parts were sourced from Ebay apart from the battery which I had. It worked surprisingly well, worth mentioning that the car aerial was a universal job and I had to rewire it bec...
12V DC Programmable timer using the CN101a 12 volt. proper wiring setup and installation explanation
Просмотров 134 тыс.4 года назад
A video explaining the correct way to wire up a cn101a 12 volt timer along with wiring diagrams and example setup. Some people wire these up wrong and think its faulty when in fact its usually just the way its done. I hope this explains how it works and how to set it up. thanks

Комментарии

  • @RussellHank-t3t
    @RussellHank-t3t 27 дней назад

    You answered my question about daily event timers. Thanks.

  • @dji7464
    @dji7464 Месяц назад

    Best dude on yt

  • @manumanu-ut9vo
    @manumanu-ut9vo Месяц назад

    Hi can you post a link with the stl for the printer?

  • @dcglasgo
    @dcglasgo Месяц назад

    Best and most simple explanation of them all. Thank you!

  • @MrOzzy281
    @MrOzzy281 2 месяца назад

    What connectors do you use to connect to the spades on this device please?

  • @PeterMolloy-r2w
    @PeterMolloy-r2w 2 месяца назад

    Nice run through. Thanks

  • @freddurstedgebono6029
    @freddurstedgebono6029 2 месяца назад

    Whats the standby current draw on this thing? Does it have internal memory where if you disconnect the power it holds the right time and date?

  • @timothyohliger5888
    @timothyohliger5888 2 месяца назад

    Hello and thank you for making this. I'm curious about a scenario which could occur and how the program would run. Lets say the unit opens a chicken door at 5am and closes the door at 6pm. But at 6am (after the door has been opened) I manually close the door. What will the timer do when it gets to 6pm? Also will the timer re-run the program week after week, infinitely? Thank you so much!

  • @daltongomez3547
    @daltongomez3547 3 месяца назад

    Directly to the point... Works perfectly

  • @tonymartinez7423
    @tonymartinez7423 3 месяца назад

    Thanks for the info

  • @ChuckMahon
    @ChuckMahon 3 месяца назад

    How about another update on your experience with the device?

  • @dmitryo6649
    @dmitryo6649 3 месяца назад

    I use a combination of Navigator 6 and Smartphone with Google maps.

  • @chrisbaxter5710
    @chrisbaxter5710 3 месяца назад

    I noticed your unit's display is on without any power.... should the unit arrive with a functional display? Ours is DOA and display can't be turned on, even when connected to a 12v supply. The red light comes on, but no display

  • @ommi11
    @ommi11 4 месяца назад

    Thank you I almost gave up but I found your video thankfully 👍👍👍

  • @BrendaFrok
    @BrendaFrok 4 месяца назад

    Hi, great demonstration. It had me beat. I have a question please. Can you program it to go on and off 16 times per day? If so, can it be made to repeat for consecutive days using the same program. So that it would go for more than one day, say 5 days? Thank you, Frank

  • @coachgeo
    @coachgeo 4 месяца назад

    can you wire parallel? around the timer for a; bypass of timer .. with a manual switch to activate the load, using same or alternative power source? if you can .. does one need a diode to protect the timer from back feed?

  • @stephentonks2342
    @stephentonks2342 4 месяца назад

    Thanks for posting.. I am about to order one of these to use with a 12v outdoor strip light.. I will save me a lot of frustration.

  • @scuffieduffie
    @scuffieduffie 5 месяцев назад

    Is 1 minute the shortest interval?

  • @MRNEWBO
    @MRNEWBO 6 месяцев назад

    What size fuse do you use please

    • @Mr12v
      @Mr12v 4 месяца назад

      Hi. The fuse is to protect the wire primarily so needs to be sized to whatever wire you are using. the ones here were only a couple of amps :)

  • @정말좋아-e8p
    @정말좋아-e8p 6 месяцев назад

    Can I set it and save it and then use it again a few days later? Is there any other way other than pressing "C" to turn the display back on?

  • @joeuser2012
    @joeuser2012 6 месяцев назад

    Thanks that solved my problem the company I purchased the timer from never answered my questions I needed it to connect it to a pond pump ..

  • @MWS1960
    @MWS1960 7 месяцев назад

    I have a 2015 RT, but I dint see any conversion kit so I can replace my current nav 6

  • @edfox2725
    @edfox2725 7 месяцев назад

    Thank you! I seriously thought I was crazy. I was so frustrated until I found your video. I’m really hoping this helps me.

  • @stephenburnage7687
    @stephenburnage7687 7 месяцев назад

    Whats the CR button for?

  • @danielalarcon2982
    @danielalarcon2982 8 месяцев назад

    I need to turn on a load (120V, 15Amp) everyday for 1 hour, but occasionally I need to turn on manually for 1 hour too (countdown).

  • @michaelmason5459
    @michaelmason5459 8 месяцев назад

    Hi brilliant good clear instructions. One question I've have a couple of spare timers, the clock won't switch on tried reset but no joy , power light on but no clock funtion, had them awhile but not used. Regards Mick

  • @edinaldomanuel8329
    @edinaldomanuel8329 8 месяцев назад

    very good explanation. Congrats

  • @keweenawbee
    @keweenawbee 8 месяцев назад

    Hey Mr. 12 volt. So glad you’re out there. I think this latest Nav unit is getting a bad rap don’t you? Briefly I just bought a new RS and ordered one of these units. Only used it once so far but was impressed. I asked Scott @ Nothing To Prove why he has both his paired phone and a SIM card in his Connected Ride Nav, and he said something about real time traffic updates. Is it true that you need both? I thought maybe my paired iPhone was enough, but if there is some advantage to paying my cell carrier for another device I would certainly do that, and just discontinue it over the off season.

  • @TRONATHON888
    @TRONATHON888 9 месяцев назад

    Mine wont update? Any ideas. I press download and nothing happens

  • @TRONATHON888
    @TRONATHON888 9 месяцев назад

    When I try to log in it tells me security reasons I myst reset my password. It sends a lunk toy email but when I create a new password it says Network error. Please try again later? Several days later and the same thing keeps happening so I cant log in?? Does anyone know how I can log into my account without getting tbe Due to Network error we cant change your password at this time. Try again later.

  • @paultruong6000
    @paultruong6000 9 месяцев назад

    how many time you can program in a day

  • @Riverfurm
    @Riverfurm 9 месяцев назад

    Can the timer be programed to come on every hour for 1 min for the whole week? Thanks

  • @alabamaflip2053
    @alabamaflip2053 10 месяцев назад

    It is a shame that someone does not make a product like this in a simple form without the cross wiring. Great video showing how to get this timer to work properly.

  • @MarilynDann
    @MarilynDann 11 месяцев назад

    Excellent video, can I just ask do you need to set the time currently before setting up the program times

  • @ccetin1968
    @ccetin1968 11 месяцев назад

    When I import the route I made in Basecamp, it gives a "route not found" warning. Route plans with *.gpx extension do not work. Does anyone have any suggestions about this? The important thing in Navigator is to prepare our daily route plans in advance for long trips and upload them to the navigator.

  • @fishandreptileinfo
    @fishandreptileinfo 11 месяцев назад

    Hi, excellent video. Thank you. Could you tell me. Could I set this to come on for say (4 times) a day for only 20 seconds each time. It would help me if you could answer this. Thanks

  • @burgermaster4u2
    @burgermaster4u2 11 месяцев назад

    Thank you so much very helpful. I now purchased a fused box to work my garden water features…question is will I now make the fuse bow the power box to the 12v up pumps? Ie when it says power I will use the box instead of powering up units from battery?

  • @davegavin1217
    @davegavin1217 11 месяцев назад

    Why the crap music?

  • @markwest2936
    @markwest2936 11 месяцев назад

    Brilliant, I have been frustrated by this

  • @eugenuku
    @eugenuku 11 месяцев назад

    can you program to turn it off too?

  • @christophersinel8167
    @christophersinel8167 11 месяцев назад

    If i wanted the light to be on for only a minute is it possible?

  • @K1600_Rider
    @K1600_Rider Год назад

    Question. Can you use this device as a stand alone GPS, without having to connect your phone?

  • @gatisspetersonss
    @gatisspetersonss Год назад

    Hi, does it warn you about speed cameras?

  • @stalbansbiker
    @stalbansbiker Год назад

    How do you get the currrent road speed limit back on display on tft Its on your nav map top right hand corner still no sound on my nav but phone ok

  • @stalbansbiker
    @stalbansbiker Год назад

    I cant get any sound with navigation any ideas

  • @prenticelennon3087
    @prenticelennon3087 Год назад

    where do I connect the solar panel?

  • @anitacanet
    @anitacanet Год назад

    VERY CLEAR. THANK YOU

  • @johnruben1444
    @johnruben1444 Год назад

    Whats the idle consumption in watts of this unit ? I am connecting a small 7ah battery, I dont want it to drain the battery.

  • @allen-ty2it
    @allen-ty2it Год назад

    Thanks for this video. Having used Nav 6 and issues around route imports I have now got the Connected Ride navigator. Will be interested to see how you get on with the route import. On the Nav 6 if you didn’t start at the beginning of the route it would either continuously try and navigate you back to the start point OR if you directed it to take you to the finish it would disregard the route and direct you via the shortest route. Hopefully this issue will be resolved. Please update when you follow a route and how well it works. Cheers

  • @stuartstephenson5044
    @stuartstephenson5044 Год назад

    Hi I've set my time as described,but in top right corner their is a icon of some sort,my time won't turn on. Also when I look at it the next day their is icon under week like a,,