![No Climb Products Ltd (detectortesters)](/img/default-banner.jpg)
- Видео 94
- Просмотров 257 181
No Climb Products Ltd (detectortesters)
Великобритания
Добавлен 11 мар 2014
Detectortesters (No Climb Products) Detector Testing Technology
Choosing the Right Test Solution for Fire Systems
An overview of all the different test solutions which are available, and the key features they offer for testing and maintaining commercial fire systems.
Find our more:
detectortesters.com/
Product Training:
detectortesters.com/training
Find our more:
detectortesters.com/
Product Training:
detectortesters.com/training
Просмотров: 258
Видео
Testifire XTR2 - How It Works
Просмотров 1 тыс.7 месяцев назад
Stephen and Anthony give a full run through of how the product works and the data that is captured to prove testing has taken place. Testifire XTR2 Combines testing and reporting to deliver on compliance - giving fire companies and building owners the insight and assurance they demand. During testing, Testifire XTR2 senses the detector LED to confirm the test result - automating the recording o...
Using the Detectortesters Connect App to Test
Просмотров 52511 месяцев назад
In this video we’ll guide you on how to use the Detectortesters Connect App to create a test job and carry out testing.
Cloud Portal & Reports
Просмотров 7511 месяцев назад
In this video we’ll guide you on how to access and use our cloud portal and reports.
Registering your Testifire XTR2
Просмотров 21311 месяцев назад
In this video we’ll guide you on how to register your Testifire XTR2.
Scorpion Installation in ceiling void spaces
Просмотров 34711 месяцев назад
A visit to see Premier Fire & Security at the John Hansard Gallery in Southampton. Saving time and minimizing disruption to the sites ongoing events was the main driver for installing 10 Scorpion heads. detectortesters.com/scorpion
Testifire XTR2 - TEST REPORT SHARE
Просмотров 1,9 тыс.Год назад
Testifire XTR2 Combines testing and reporting to deliver on compliance - giving fire companies and building owners the insight and assurance they demand. During testing, Testifire XTR2 senses the detector LED to confirm the test result - automating the recording of results and pushing the data into to a customised report. • All-in-one smoke and heat testing • Automated PASS or FAIL record • Tou...
SOLO & TESTIFIRE SMOKE TESTING TIPS
Просмотров 4 тыс.2 года назад
When it comes to testing smoke detectors, we have a range of tools for you to use. Here Paul covers a range of top tips to help get the most out of using them. Training: Pole Training: www.detectortesters.com/courses/using-height-access-poles-for-safe-testing-of-fire-detection-systems/ Testing & Maintenance of Fire Detection Systems Webinar: www.eventbrite.co.uk/o/detectortesters-17587083810
UPGRADING YOUR SOLO 365 FIRMWARE - STEP BY STEP GUIDE
Просмотров 5422 года назад
This utility is a free Microsoft Windows based application that allows you to update the firmware on your Solo 365 from your own computer via a USB connection. By choosing to update the firmware, your tester will benefit from performance and stability improvements. Firmware update link: www.detectortesters.com/product-support/solo-365-product-support/
TOOLBOX TALK - How to AVOID Nuisance Re-Alarms
Просмотров 1,8 тыс.2 года назад
Should re-alarming just be accepted as part of the testing process, or is there another way? In this latest Toolbox Talk, Paul looks at the issue of clearing detectors that re-alarm after testing has been completed. The problem of detectors re-alarming during testing is fairly common, in a previous poll some 60% of respondents told us this was something they experienced either ‘often’ or ‘occas...
Testifire Capsule Screen Indicators
Просмотров 2343 года назад
Training: www.detectortesters.com/training/ Social: Twitter: NoClimbProducts Facebook: detectortesters1
TOOLBOX TALKS - SOLO 365 CLEARING MODE
Просмотров 7834 года назад
TOOLBOX TALKS - SOLO 365 CLEARING MODE
TOOLBOX TALKS - TESTING HEAT DETECTORS WITH TESTIFIRE
Просмотров 1,8 тыс.4 года назад
TOOLBOX TALKS - TESTING HEAT DETECTORS WITH TESTIFIRE
TOOLBOX TALKS - SOLO 460 - TESTING LARGE PROFILE HEAT DETECTORS
Просмотров 1,1 тыс.4 года назад
TOOLBOX TALKS - SOLO 460 - TESTING LARGE PROFILE HEAT DETECTORS
TOOLBOX TALKS - SOLO 200 DETECTOR REMOVAL TOOL
Просмотров 10 тыс.4 года назад
TOOLBOX TALKS - SOLO 200 DETECTOR REMOVAL TOOL
TOOLBOX TALKS - NEW SOLO 727 MK2 CHARGER
Просмотров 2584 года назад
TOOLBOX TALKS - NEW SOLO 727 MK2 CHARGER
TOOLBOX TALKS - FUNCTIONAL TESTING OF FIRE DETECTORS & ALARMS
Просмотров 1,6 тыс.4 года назад
TOOLBOX TALKS - FUNCTIONAL TESTING OF FIRE DETECTORS & ALARMS
TOOLBOX TALKS - CHARGING THE SOLO 365 BATTERY PACK
Просмотров 5144 года назад
TOOLBOX TALKS - CHARGING THE SOLO 365 BATTERY PACK
TOOLBOX TALKS - HEAT DETECTOR TESTING
Просмотров 6 тыс.4 года назад
TOOLBOX TALKS - HEAT DETECTOR TESTING
TOOLBOX TALKS - Q&A - FIREX 2019 #ASKPAUL
Просмотров 2815 лет назад
TOOLBOX TALKS - Q&A - FIREX 2019 #ASKPAUL
Thanks very good video thanks for the info
Does it can remove for horing smoke detector
Hi great video, but what if you just get fresh air and no smoke even after replacing smoke cartridge and generator?
Price?
Hello I have a fairly new 460 cordless heat detector testers. It helps get the job done right. I have an issue after replacing my battery it lights up green then after two seconds it turns red? Your help is greatly appreciated!
Hello Paul, My name is Jose, I am a fire alarm inspector. I have a fairly new 460 heat detector tester. After replacing the battery. It lights up green then after two seconds led goes red and nothing happens. Can i get some help as to why this is happening? It was operating normally all day until i replaced the battery..
Hello My name is Jose, I have a fairly new 461 cordless heat detector tester. My tester after replacing the battery, goes from green to red why is this? I always make sure to use fully charged batteries. Your help will be really appreciated.
My battery says its charged (Green) but when I put it in the tester, its dead. Need to replace? I'm not sure of the battery age in question.
We have a few of these that get stuck, like the springs stop working. Can we fix these? They are the SOLO 330 devices. It keeps happening.
Using a solo duster might also help with clearing smoke
Good one
What if the detector does not reach the threshold of the sensor?
If the heat detector tester does not have the heat output required to activate the heat detector sensor threshold, the detector will not activate. It is important that you use the correct heat tester according to the heat detector class to be tested. Heat detector testers manufactured by detectortesters (includes Solo and Testifire) are designed to test UL heat detectors that have a temperature class of Low/Ordinary and Intermediate. For European (EN) heat detectors that is Class A/B and C. The higher heat detector activation class (intermediate for UL and Class C for EN) typically have an activation temperature above 194F (90C). Testifire can test detectors up to 212F (100C) Please keep in mind that the ambient temperature (in the protected area) can have an impact on the ability to test a heat detector as a low ambient temperature can mean that it is not possible for the tester to reach the activation temperature.
Will this work on residential detectors that are more flat?
The Testifire test cup can accommodate a maximum diameter detector or alarm up to just over 5 inch's or 130mm. The maximum depth 2.6" (66mm). This means that it can test residential alarms that have diameters less than the above.
How many tests can one smoke cartridge do?
Up to 250 x 30 second tests
Using the latest firmware and ES3 capsules it should be possible to achieve 250 x 30 second tests. If the average test time is longer than 30 seconds the number of tests goes down.
Is there a way to purchase this
Can you specify approx. how many sensors can be test by using one A5 aerosol Can?
Solo A5 is specifically designed to be used within a Solo 330 and 332 dispenser and if used according to our instructions typically around 200 test can be obtain. Please note: that there are a number of factors that can reduce the number of activations from a Solo smoke canister, such as ambient temperature; detector integrating time (time to alarm) and how dirty/contaminated the detector is. If you want to learn more book yourself onto our FREE CPD technical training webinars - More details on our website.
How many time approximately can 1 smoke capsule be used?
Is there any product available to remove the detector by pressing the notch? As there are some detectors, you have to press the lock, then rotate it to remove. Kindly advice for EST3 detectors.
The Siga EST3 has an anti-tamper lock (tamper-resist lever arm), which is usually used when the detector is mounted on a low ceiling to stop removal of the detector. When installed out of normal arms reach the manufacturer's instructions recommend that the plastic tamper-resist lever (in the base of the detector) is removed (before installation of the detector) which will disable the anti-tamper feature. If the detector has the tamper-resist device fitted, the only way to disengage the lock is to gain access to the detector and use a suitable implement into the access slot to dis-engage the lock. We don’t manufacturer any removal tool that would allow dis-engagement of the lock via a removal tool and Solo height access pole.
Is there a tip for removing a detector from a dropped ceiling? As we see in the video the tile itself pushes up.
I used this tester. Unfortunately, it's best for high profile electronic heat detectors. The heat element is at a fixed height within the unit and it blows across a small area. Low profile heat detectors tend to blow the disks when used... not good for 281-C, TD-135... the MIR-601 will activate by hand heat... the 5601A blows at an alarming rate. I have been migrating away from the flame less butane and looking at a pencil type battery operated heat "wand". That way I can distribute the heat fast and evenly over the surface of the device. I find it more effective for testing and I don't damage them like the "one size fits all" concept in the video. A good modification to this tool would be to have the heat source be adjustable to be more effective.
Hi Paul, what's the advantage of upgrading? Is there a list of what's changed?
To expensive
Exactly what i was looking for, thank you!
Is it possible to use on any brand of Smoke detector? Conventional or addressable type?
Hi, the Solo 200 is designed as a universal solution. If you have a particular brand in mind feel free to contact our support team who will be able to confirm. www.detectortesters.com/contact-us/
How do you fix the 330 when the cup's diaphragm sticks and the "push to smoke" action doesnt function?
Did you ever find an answer?!
@@allec no. We send tg3em back with the lifetime warranty for a full replacement/new item.
Thank you for sharing this video.
Hello tienen para vender de estos?
How many tests does a Solo A10 do?
Superb sir
Good evening I got error for smoke detector each time? What remedy can I do for my tool?!!!
Hi there, please contact our product support team by email: support@detectortesters.com and they will be able to help you out.
For the CO detector, Ul standards have home detectors set to go off at 400ppm in 5-15 minutes. In this video you wait only 10 seconds for it to go off. Are these a different type of CO monitor or ?
Is that useful for Notifier's FSP series detector?
Hi Carlos, thanks for your question. The detector you mention has a design that may require a specific removal tool. Please contact our support team who will be happy to advise you more on this. You can contact them here: www.detectortesters.com/contact-us/
1m40 of which about 10 seconds is of any use
Thank you for your feedback John.
@@detectortesters1 The product may be good but this vidio shows very little
Can i replace the internal batteries by dismantling packaging these are lithium batteries right?
Thanks for your question. The batteries are NiMH, the internal cells cannot be replaced. More information is available in the SDS on the support section of our website or via our support team.
Your new smoke sabre
Great video! Will we see you at FIREX this year?
Thanks! We will be at FIREX this year. Looking forward to seeing you guys there.
very informative and well made. Thank you
Thank you for the Feedback Phil. Much appreciated.
Nice one
Would have been nice if you showed how well it works...
How to clean the solo 330 and 332
I have this model of solo heat detector tester. I once used it and after which when i connect the battery baton and press the red switch, No green blinking light comes up. The battery baton is fully charged and it doesnt give a blink when connected to heat detector tester. What could be wrong ?
I have this model of solo heat detector tester. I once used it and after which when i connect the battery baton and press the red switch, No green blinking light comes up. The battery baton is fully charged and it doesnt give a blink when connected to heat detector tester. What could be wrong ?
Hi, thanks for getting in touch regarding your Solo tester. The best option is to contact our technical support team so they can talk you through a few things and understand why this may be occurring. You can find all the contact details here: www.detectortesters.com/contact-us/
Why so expensive?
Thanks for getting in touch. The design and manufacture of our products ensures we can offer the safest, most effective and compliant solutions for testing detectors. This, along with the average life-expectancy of the products and the approvals they carry from leading detector manufacturers goes together to offer real value. We're happy to talk further, feel free to contact us directly to talk about specific products.
Need info
ON solo charger
Писали бы вы по русски на своем сраном сайте. Мне штанга нужна для баллона с газом. Готов купить,но не говорю и не собираюсь на вашем сраном английском.
Good little video Paul!
Excellent Paul. Always fun to watch your videos! thanks
I look forward to trying this out on our next aspirator service
Excellent Paul! thanks
When will this device be available? I do not see it on the website. www.solo-tester.com/site/products/smoke_testing/
Hi Todd, availability will be subject to approvals. Are you a Solo customer from the US?
No Climb Products Ltd (detectortesters) Yes we purchase direct in the US. We reached out to rep and she was thinking the target was mid year 2017.
Hi Todd, SDi (www.sdifire.com) will keep you informed. As soon as there is approved product they will have it!