Видео

請問我有一台Switch系統，INPUT是 20個VGA畫面，output是1個VGA 配上 2個PS2 鍵盤滑鼠， 我想用遠端連線到一台電腦，配合TinyPilot Voyager ，就可以看到GUI畫面跟使用鍵盤滑鼠控制嗎?

How can I buy it? 🥲

Hi! Thanks for making this. I am trying to do a similar thing but with the MKS GEN L V2.0. If I simply connect the servo to the digital 6 pin and 5v+ground, will it still work? The V2 doesn't have the servo1/servo2 section that the V1 had so I'm a little confused.

Last one only worked for that webpage the other one I opened I still got the privacy error. The way I fixed mine was restarting my computer and it’s fixed likely needs to be updated.

那個噴在pcb上的顯影劑,多久後會自動消失的噴劑是什麼東西?

For me the board does not appear after flashing via Katapult (CanBoot) with the same bootloader settings. It remains in DFU mode and there is no by-id device. My size ist much bigger. Downloading element to address = 0x08000000, size = 7804 Download [=========================] 100% 7804 bytes Download done. File downloaded successfully Is there a solution?

後面跳太快了 Blog 無法訪問了

看完底下一堆人留言 超級退火 哈哈哈哈 一台破萬的機器 問題這麼多....敢賣價格這麼高 也是滿屌的 買到撞到 隔壁某些網紅介紹也是滿沒職業道德的 明明缺點遠大於優點 卻啥都不講

hi is it work with marlin ?

這個還有續集嗎? 想要看看能不能把Anycubic i3 Mega s 給修改了，但沒有續集能繼續學XD

i think this is called "baller"

想問一下，如果freenas要換主機板的話，有什麼事項要特別注意的嘛？

thanks for the video, what switches you’ve got here?

我比較好奇那是什麼滑鼠😗

請問可以在戶外使用嗎? 還是只能在有插座的地方才能使用?

I wanna know what tool kit that is - it looks like it has everything. Is it Magnetic too?

Lastone works with brave.

我的募資兩台已死…

How fast? Thanks

請問這台機器怎麼校正 還有怎麼設定參數 有聯繫方式嗎

请问如果用bambu klipper 的configuration 如何设置

請問可以使用arduino替代樹莓派嗎?

Would you be able to do a video showing how to configure the EZ31865 to work with this Octopus MAX EZ V1 board?

2023 ax210 not support wifi?

請問tinypilot基本上是區往內執行，請問有沒有辦法透過什麼樣的搭配可以實現over internet遠端操作？如果只是透過行動分享器搭配設定port轉發是否能達成？ 謝謝

don't put your title in english if you're not going to speak english in the video

有ab 的頭嗎？

Eu não entendi nada do que você falou, mas me ajudou muito! Obrigado!

应该还有一条缺点就是太耗电😅

謝謝分享 因為此商品我也考慮了好久 難怪網路上一堆人在賣二手的

像這樣功耗大概多少啊 請問

Could you please make an English version of this video? Thank you

Bro, you're a true hero...I was scratching all my body parts for couple of weeks to succeed installing the board with EBB SB2240 with no success at all. BTT lacks instructions this regard. Thanks indeed!

這塊板子就差可以像M8P那樣 可以直接放上位機在板子上 節省空間~

好奇問一下影片中這個電繪版可以「螢幕錄影」嗎？ 以及影片中之出現的第一個是多少錢呢（我點進去網址了，但是不知道選哪一個才好） 還有它支援安卓系統嗎？（我真的用不慣蘋果…超難用）謝謝！

❤

Hi Botio, I've the same motherboard " Octopus Max Ez ", is the first time that i'm testing that board.. and with the command "sudo dfu-util -a 0 -D ~/CanBoot/out/canboot.bin --dfuse-address 0x08000000:force:mass-erase -d 0483:df11" i've got the same result. But with the command "ls /dev/serial/by-id/*" after press the reset button.. appears that "ls: cannot access '/dev/serial/by-id/*': No such file or directory". In the path /dev/serial i've only "by-path". Please, i hope that you can help me Thanks

Still having issues, what did you mean in this paragraph about "upper computer" Enter cd klipper on the terminal to enter the klipper folder, enter make menuconfig to enter the menu, and set the correct options and pin positions as well. Here, pay attention to the part of the can speed. I personally set 1 million. The channel of the upper computer must also be set to the same number in order to connect correctly. After completing the option settings, press Q, Y to save and leave. After that, just enter make to compile, isn't it very simple?" I am still not able to get the UUID even once everything has been flashed

I am trying to figure out when you flashed the EBB42 and whether is it connected to the Octopus MAX CAN pins or to the PAD-7 can pins

I went step by step with the same Octo Max Ez and EBB42 and could not get it to work.

Thank you so much for this, trying to do this with a translator for the webpage and from what i see you have. Really wish you could do an english version to this video if possible. But oh well going to give it a shot here and see if i can get it to work.

您好,我想請問一下!我10G網卡可正常識別設定靜態IP後(電腦直連)，每次NAS 重開該10G網卡的靜態IP都會消失...!?請問有什麼解方嗎?

真的很不推 這品牌，被廣告騙了。

我想請問這項產品應該要怎麼訂購？

...這台顯卡感覺不夠到可以用來剪輯後製..

OMG I dont speak Mandarin, but god you helped me. Thanks

Thanks , for that

我的poiema one不到一年就故障送修，以前都好好的，改善了我嚴重過敏的問題，但壞了以後自己一直修不好，與客服多次聯絡操作也沒用，從連絡客服一直到修好到家，服務品質有夠差，而且清潔機器容易造成損壞，我這樣真的會不敢清潔它，一洗就壞掉.......我會直接說，這是我第一次買poiema的產品也是最後一次了，還沒買的建議不要買!!! 考慮一下其他品牌吧~

您好！謝謝您！在您的影片中學習到不少，且已經從您的影片中完成M8P+CB1固件刷新，但目前卡在沒辦法突破刷EBB，請問如何取得或何處可以下載小雨刷EBB的教學檔案？謝謝！

How you do this ?