Видео

Best Video, please do Beams (UDL, VDL..) Pullies, and more..

I have to assume it's going to take a long time (hours) to complete this Lego Man project.

Where did you get the drawings and dimensions to design each part?

thanks for this!

Great projects and presentation of them! Well done.

**** I love you, you just helped me out alot with this ! You should get a raise for this ! Thanks again for the explanation !

I was perhaps one of the last generations to be taught to make pretty much anything out of sheet metal using Triangulation, Trigonometry, Radius and circumstance mathematics including learning the area and volumes of mostly Commercial air conditioning Air Duct fabrication. Engineering platforms to hold 5 ton plus APAC systems. Coded Welding. Stainless steel fabrication including the good old bullnose corners out of 316 stainless steel. Such an amazing journey.. Unfortunately in Australia tho it was the lowest paid trade with good old hard working factory hands and fast food outlet management making often more income. But it worked out well for myself going onto many mining projects around the world. Today the Cad system is obviously to be profitable the only solution to have a competitive chance in the market. But sadly good quality skills like ancient language is being lost at a massive rate. Anyways love the bender. The Apprentices back 20 years back would get all excited when the power would go out. But I’d be nahhh sorry lads but the pan break needs no power and there is 3 of them and ohhh 3 apprentices. Good old laugh. Cheers mate enjoy watching 👍👍👍🇦🇺

Jesus flock

0:57 1:01 1:03 1:04 1:06 1:52 1:55

Thank you for this, im a bit rusty, but this gives me confidence before i hit the tit, in the main program :)

thank you for making all this video. you help me understand how should i do these things.

Sar mujhe Hindi me batao

Sir your all videos are very helpful for me , thnk you so much sir ..

Good job.

Great - I just learnt so much from you. You are a great teacher!

If only I could get it to work.

I was looking for something to help mass train people to use 3D printers. Excellent video!

my connector piece and torso don't fit together. the nubs on top of the connector piece that go into the torso are 47mm ( I did 10x ) but from the inner edge of the bottom of the torso you say to place the triange at 3mm (30). so the triangles are trying to go through the nubs instead of alongside them

I need help

Thank you❤

What’s a train?

I have that same machine, except mine is from the 1930's. This video was very helpful thanks!

Thank you vary much dear! This is possible the best explanation on engineering I have ever seen. Why can't my lecture theach like that? 🙂

What if we remove the king post causing compression forces in the upper chord and tension in the lower chord, how would this effect the formula

helpful, thx for posting

DO NOT USE CamScanner. It is Chinese spyware with a trojan dropper in it.

I love the way you keep track of tension and compression. I could never get those right.

RXETDRYTFGYIU

I have a new Haas TL1 Lathe...The rortary handle jogging feature is flawless......... however the book says jogging can be accomplished by holdind down a directional jog button , which has never worked. Is there a setting or somthing to activate the ability to jog by pressing and holding the directional buttons ?

Thanks, just what I needed.

Does anyone know why 150lb is placed at joint C? Normally should not the weight be put in the center of gravity? Since the distances AC and CD is not equal I don't think C is the center of gravity.

Very good video, thank you for the instruction

I didn’t make the song, Benson Boone made it

Good. But?! What to do if you have more than 1 base and need g55 and much more

I don't do any cnc or any sort of machining, and I loved this video. Autistic engineer father sent me this, and I loved every second of it, haha

I tried putting in the axis but the dimensions are too small and I don't see a solar panel model in the thingverse

Great video man, I'm working on a camera mounting plate for shoulder rig. The one that came with the rig is NOT sold seperately ??? so have to make a second for another camera and this helps a lot.

This is so easy. My shop teacher did some sort of counting x amount of ticks forward till it tips off, then x - 1 back to find the axis where it bumps off. His way still doesn’t even make sense to me. Thank you. I don’t know why he has to over complicate it so much

Great video thanks!

hello i have a question, what do i do when the arc is so big that the center point of the arc is not visible on the page?

Why did you flip the force of Fab. doesn’t negative mean compression?

When trying to select the top plane through the body, simply hold down the left mouse button and it will give you different objects to select.

Hii, how to take offset for round bar in VMC?

thank you very much

Very informative video.👌 Just a little hint for anyone who watches this.... To quickly access the 'Work Offset' page you simply press the F4 button to swap between 'Tool' and 'Work' offsets . Thanks Mr Fuller for this tutorial.

thank you very much ,you explain the hand folding machine so clearly.

Send me app link

With the doors closed when touching the workpiece edges using the edge finder, can you see the finder bumping off its axis clearly and easily ? Is it possible to set the spindle speed to the safe 700 rpm and leave the doors open? Thanks.

Good tutorial for beginners but with ER collets the flange that locks them in is eccentric so you should insert the collet into the holder at an angle where the flange is hooked under the groove and rotate it to align with the holder while pushing foreword, in sot sure how to do this just wiggle around while pushing but do this without a tool in it and until it snaps or locks into place. This is especially important on the larger er collets. When using a weldon type holder that requires a flat milled on an endmill be sure to tighten the set screw into the slot or flat then back it out just enough to slide up and down, if it does not hit both ends of the notch and is not captive you did not get it into the notch created by the flat and need to adjust it until you find it then tighten it tight. I think you may have gone overboard with the gloves used to hold an endmill or any tool, yes you need to be careful but if you are that sensitive then you should never touch a part because they often have sharp burrs and are covered in sharp chips that become splinters easily. In the real world you won't make it if you need a glove to handle a tool, I have had several cuts and numerous splinters over the last 30 plus years in machine shops, one of those times I was wearing thick leather gloves, I thought they would protect my hands but trying to pull stringy chips out of a conveyor proved them to be ineffective, better to rely on common sense. My advise is use common sense, learn from your mistakes and have a good pair of sharp tweezers and regular ones for the splinters sticking out of your skin. You don't have to be tough but it helps to not be a pussy either when working in a machine shop.

why did you not do lead ins on the circles? great video by the way. thank you so much.