Видео

@@elijahdinneweth541 recycling and yard waste are supposed to be separate for these accounts in this city. Doesn't mean people are going to do it though.

@@trashmonster26 it's a dji osmo action 5. So far I'm fairly impressed by it. Better than my old gopro. It's funny you say it's good because although of "reviewers" give it bad marks for image quality, lol. I'm not trying to make professional cinema, just crap for RUclips and such, and for that it's fine. I got it as an open box from BB, so the price wasn't bad either.

Yeah, you cycle it back and forth a couple times to get it all out, as the ram is just half the height of the truck. If you try to do it in one push, you will just have half the load go over the ram instead of out the back and end up with a big cleanout job.

@@DrBeary yeah, it's the same truck. She's approaching the 1 year mark now.

@@NZRubbishTrucks the route is about 1200. I can usually only get about 1000 on the first load. Really depends on how much yard trimmings are mixed in.

You can see them here 8:43

Does it need to?

You watched my video. Yay. 😁

@@SCSITerminatorWe’re both big fans lol

It was nice to meet you too.

Yeah, I too have been thinking about longer videos. The problem is not storage capacity as flash carts are cheap and large these days, but rather battery capacity. It's hard to find a good action camera that's capable of lasting more than an hour.

There's a few changes they did with the sensors on it, but mostly yeah, the same arm, not that anything was wrong with it before.

Old truck is still in service. The whole area I'm in is growing, so our company is just expanding with it. New routes and territory means new trucks, and as one of the most senor and experienced asl drivers at the site, they decided to reward me with one. As far as performance, it seems to pack about the same. I get roughly 14 tons on it, more if it's wet, less if it has a lot of leaves and yard crap mixed in. For a 31 yard body, that is the expected performance as 1000 pounds per cu yd is very common in the industry. You can technically make a stronger packer, but you end up having to reinforce it with extra steel and weight that overall its not worth it. The 1000 lb/yd seems to be the sweet spot. You only see more packing pressure used in static bailers in recycling centers and transfer stations where the extra weight for the chamber reinforcement needed for the increased pressure isn't a concern. Anyway, back to this new truck, think the ram moves slightly faster which is nice, but it doesn't seem push any harder, though not any softer either. The arm initially was slower from the factory than my old truck, though thankfully I know the service code and how to speed it up (don't tell my mechanics). Anyway, I configured it to where the trolly can go from bottom to top in 3 seconds as outlined in the service manual. Any faster and it just becomes so violent it's borderline uncontrollable, and could drastically shorten the life of the arm with abnormal wear, any slower and it's unproductive and needlessly increases your workday. It important to get this right as just a 1 second difference in cycle times equates to 20 minutes over a 1200 stop route, so yes, a 1 second difference in cycle time is significant. Otherwise the cab is a lot more comfortable, the ac is decent, and the turning radius seems slightly better which will help in coves. Anyway, overall I'm satisfied, it's definitely not a downgrade.

Sounds like you'll continue to have plenty of work and that your company values your service and takes good care of you, hard things to find these days! I'm glad to hear you're enjoying the new truck, keep up the good work and please keep posting these great videos!

If you unplug the far limit sensor for the packer, you can get the packer to go a lot further in like your thinking. I sometimes do it if I have a bridge of cardboard that I need to clear and I'm still fairly empty. Still, it doesn't really do much if it's this full. If the packer isn't triggered to retract by the sensor (like it being unplugged), it will just stall out against the packed trash until a hard coded timer triggers it to retract. It doesn't push with any more pressure or anything and woln't cause the trash to get packed any tighter. Also, while the packing cylinders are telescopic since the packer plate also acts as the ejector on this model, they are also setup so only the first stage of the cylinders build up any real force to crush things. The later stages have smaller bores (to reduce size and weight) and are only capable of generating enough force to eject everything when the tailgate is open, they arn't designed to do the bulk of the packing and aren't capable of generating any real force to crush stuff. So anyway, I could unplug the sensor, but all that will happen is it will push until it reaches the end of the first stage on the packing cylinders which isn't that much beyond where the sensor is, and then stall because the later stages can't generate any force to push further. And it will sit stalled like this until: the timer causes it to retract, I dump a cart causing it to abort and restart the autopak cycle from the beginning (I can change this behavior too to where it doesn't do this, but it causes problems when packing out at the end as I need it to auto abort out of the stall), or I manually retract it. Anyway, I know it sounds cool, but it doesn't work like your thinking it does in your head and just isn't worth it. Also, front loaders work similar and there are some operators who like to keep that sensor unplugged all the time. It works better for them because they like keeping the hopper completely empty and everything pushed way back so they can dump a large (like 10 cu yd) dumpsters in without any issue, and since they aren't continually collecting and packing like I am, they don't mind controlling everything manually between the stops. Still, they got to be careful as trying to pack with the later cylinder stages can bend and destroy the whole cylinder and replacing one is like tens of thousands of dollars and days of downtime. Like I said, those later stages just aren't designed to withstand that kind of force.

It's doing ok, I just got a call from it!

Yeah I think they're weird looking too, but there actually quite a few of my customers that use whatever brand they are.

@@SCSITerminatorThey’re Glad. They make some other funky colors too. I got some blue and green ones

Me too. I live a very trashy lifestyle

@@trashyraccoon2615 I sort of do. I love when I see houses with a lot of garbage out for pickup and I take their garbage. I just tool like 8 bags of garbage from this one house this morning, I could've taken more because they had 2 of the 96 gallon cans that were overflowing but I didn't make enough space in my car. Otherwise I would've just emptied all their garbage

@@trashyraccoon2615 I don't think the people really care who takes the garbage away, just as long as it goes away

@@trashyraccoon2615 I even got a couple unopened bags of chips that "expired" a week ago that they threw in the garbage

@@robertwalton1054 Some people definitely care! I’ve had the cops called on me. Just be careful out there playing amateur garbageman! lol