Видео

@FosterFamily14 yes it will.

@@thelanecompound9706 thank you. Great videos

@johnjones2194 I'm assuming you meant you have a glock 23. I would use a 19 or 20lb spring for that.

@@thelanecompound9706 No sir I have a Glock 24 long slide .40 caliber

@johnjones2194 oh ok. Most people are doing it with the glock 23, that's interesting on the long slide. Same weight springs, just make sure they are made for your glock 24 model.

@@thelanecompound9706 are you talking about the comp itself?? It has all the same dimensions as a 22. It’s just the length of a 17L

@@johnjones2194 I'm was referring to tuning the recoil spring for the mass driver. Check out my newest video on the mass driver. It will explain everything.

@3lv1n_28 those are very tricky questions my friend. The gen 5 im not sure you can put other generation slides on the gen 5 frame because of the ambidextrous slide lock lever. You will have to do more research on what can be done with the gen 5. My frame is a gen 4, and both of my slides are gen 3, and they require strike industries adapter plates to mate to the frame. Mine is essentially a gen 3 gen 4 hybrid. I'm sorry I don't know if other gen slides will work on a gen 5 frame. Definitely a 19 or 20lb spring will be well matched for the 40s&w. The mass driver compensator you just have to make sure you order one for a gen 5.

@3lv1n_28 and watch my new video on the whole mass driver thing I explain everything in the more recent video.

@@thelanecompound9706 Alr Thank you I appreciate you replying im gonna watch your video and let you know

@@3lv1n_28 slide is made by LFA (Live Free Armory ).and the comp is a strike industries Mass Driver

@@sensay8374 glock 22 with all the caliber conversions. This slide is 9mm

@ralphtime I fine tuned mine finally. I made some follow up video explaining how to make it work

@@adrianfigueroa8721 ruclips.net/video/C6KqrfuVKTg/видео.htmlsi=LYdJDBb6v3yl343F

@@adrianfigueroa8721 I made a video about that. Check out my channel

@@adrianfigueroa8721 15lb spring for 9mm, 19lb spring for 40s&w.

@@Awkwardshooter NY

@@thelanecompound9706 i meant caliber. Sorry

@@Awkwardshooter lol my bad. 270 win

@Awkwardshooter no it's a recover tactical grip with light rail. It's just the grips that are on it.

@thelanecompound9706 the coloration of the frame made it look like a polymer lower for a 1911. I was like what

@@Jay_Ayee olight pl-pro valkyrie

@@thelanecompound9706 thanks!

@Awkwardshooter yep He was testing 9x25 Dillon in the glock before the 10mm

@@thelanecompound9706 you guys ever test the different speeds between 40 cal and 10mm? Range ammo wise.

@@AkeoT9 is that a good thing?

@@johnrobert6821 thank you. You should check out my newer videos on it. It's all broke in and tuned with the right springs.

@jondavidmcnabb yes a few. I run a dara competition drop offset holster with just minor trimming with a dremmel to fit the compensator flawlessly. The holsters I have made for a glock 17 with olight pl pro valkyrie. Then trim the bit that I need for the comp.

@Awkwardshooter thank you bro. It's definitely a project.

Honestly iv heard of them sending those springs for you striker. I would not install it. I use and recommend the factory striker spring. You will most likely have more light primer strikes if you change that out, but ultimately it's up to you. Trying their spring can't hurt. You can always change it back out if I'm right. No harm in Trying though.

Great that was my goal. Trying to shed some light for yall. Once you get it tuned, it's amazing. Good luck my friend. Lmk how you make out.

@dfendurselfjones226 yes the 15lb spring is designed for the 9mm. That would explain it being beat. I run a 19lb spring in the 40s&w. I expiramented with all different weight springs. 19lb for 40s&w is the perfect tuning for lock up and ejection pattern.

@dfendurselfjones226 also keep in mind that my slides are aftermarket and tend to be much lighter than oem slides. And mine is a glock 22 gen 3 gen 4 hybrid. Gen 4 frame, gen 3 slides with strike industries mass driver adapter plate.

@thelanecompound9706 appreciate the advice man, I'll give a 19lb spring a try! I may see if I can find a slightly stronger spring in the comp as well I will update you.

⁠@@dfendurselfjones226 hello, did you ever figure out a good spring weight for the g23? I’ve been runnin mine for my 9mm conversion barrel and it’s been flawless but I want to run it with the .40, and seen your comment. any update?

@jadaugherty81 I did find flawless running for both calibers. 15lb spring for 9mm and 19lb spring for 40s&w. Mine locks up perfectly, but there are a few things to consider. Both of my slides are lighter than a factory slide, my parts are probably different than yours, and my glock is actually a hybrid. I use gen 4 frame, and gen 3 slides with strike industries adapter to mate the gen 3 slides to the gen 4 frame. I actually use an adapter plate that is for the mass driver comp in this format so yeah our builds are more different than it would seem at first glance.

@jadaugherty81 I have 0 issues with mine. It is just as reliable as a factory glock. Plus I reload my own ammo so that is also a way to tune your firearm. I load some semi hot loads to run through it and that helps with cycling and ejection pattern is crucial to tunning.

@@thelanecompound9706 so would you recommend going a lighter spring with mine? Mine isn’t completely stock either. I have a Norsso slide on mine with window cuts so mine is probably lighter as well. I want to try and make it work with the range ammo that I have which is 165 grain. Also is your spring compressed more than half of what it was when you bought it now when you take it out of the gun?

@jadaugherty81 no, my 19 lb spring has maintained its shape and size, and I've put about 600 rounds through it with no problem s. Sounds like you need a new spring.

@@thelanecompound9706 that’s just it, it was brand new and I took it out to shoot once. Now it’s compressed. It’s a Wolff spring too. Is there a specific brand I need to be looking at?

@@Awkwardshooter It's definitely hard. No doubt

@904duval8 thank you brother

@@thelanecompound9706 yessir 🫡💯

@jadaugherty81 you should not have to go heavier but I run 19lb in my glock 22. Your case might call for a 20lb spring. That's my best guess. The spring should not be losing strength. That's weird 😕

@jadaugherty81 hello, did you ever figure out a good spring weight for the g23? I’ve been runnin mine for my 9mm conversion barrel and it’s been flawless but I want to run it with the .40, and seen your comment.

@kingxdrew2x I'm not quite sure at this point. 19lb to 22lb should work fine, and maybe try different brand if wolf springs are compressing.

@@kingxdrew2x I haven’t yet. I have tried a 20lb and it ran better but still had malfunctions. It did not stay compressed like the 18lb one did but I think next time I’m going to try the 22lb one and see if it does better

@@jadaugherty81 thanks for the response, I ordered the 19lb spring based off compounds recommendation, I have the same slide as his so less weight from the slide may not give me the same issues i hope 🙏🏽

Killer innovations is a great choice. Some of the builds on your channel are quite amazing.

It's the only way to be bro lol. 💯

Thanks 😊

There’s one option for this piece. The new XTen grips work with the .45. Icarus precision makes one but they never have anything in stock. 🤷🏻‍♂️

@litspeed7940 lol nice. Check out my new video part 2. I sent it to NCENGRAVERS and had a bunch of work done to it. Love it now.

@litspeed7940 yeah iv been searching for a while. No available options. The grip actually feels decent in the hand. I did post a newer video on it. Check it out if you have some time.

@NCEngravers thank you so much For everything.

@@904duval8 it sure does. I should make a new video on it now that it's completely tuned.

@kingxdrew2x792 awsome I settle on a 19lb spring for the 40s&w. Ejection pattern is perfect. Drops all the casings in a consistent pile about 4 feet away.

@@thelanecompound9706 thank you sir! appreciate the help, looking forward to makin that .40 feel like a 9 haha 🔥

@@kingxdrew2x it's amazing bro, you will be happy with it once you get it all tuned in.

@@thelanecompound9706 can’t wait! thank you again, I subbed to the channel, will keep you updated on the process when i get it goin!

@@kingxdrew2x excellent, thank you very much. I'm looking forward to hearing how it turns out.

@ArmeroPR I'm 💯 % completely happy with it now. It went from my almost least favorite in my collection to my most favorite. Ncengravers is very skilled, very polite, and the turn around time is about 1 to 3 weeks depending on how much customizing you want. I highly recommend. Super clean work.

@@ArmeroPR and thank you.

@@thelanecompound9706 great to know. I usually use C&H but I’m definitely gonna use NC for this gun. I wanted to do something similar but with less slide milling / holes. Now I’m rethinking this after seeing yours. Nicest 320 I’ve seen so far.

@@ArmeroPR I really do appreciate that. Hope yours turns out as good as mine. I would like to see it when you get it finished. Is yours a 45acp also?

@@thelanecompound9706 yup. It’s a 45. I’m mostly a 1911 guy but wanted something like this for riding my motorcycle. I think it fits the bill. It’s a good carry gun. I’ll send you a pic when I get her done

@@ArmeroPR check out my last video. I sent the whole thing to NCENGRAVERS. I did that and more. Let me know if you like it.

@@p00ch28 RMR

@seezinskreetins thank you sir sneezins

I'm not sure 🤷‍♂️

Lol my bad I suck at editing 😅

Glad to help.

My guy, it is actually at NCENGRAVERS right now getting the whole overhaul. Optic cut, slide cut, cerakote, and frame work. I will make a new video when it gets back to me.

Just sent it out to NCENGRAVERS to get lots of custom work done to it. Can't wait to get it back.

Thanks 💯