Видео

Must plug from usb port other then the wall to work , the battery requires a lower voltage. Example can plug from portable chargers , lab tops , computers , car chargers , game system with usb etc

Erg grappige video, heb ervan genoten 😅

Hi I have an " old M8 " that I cleaned with a wet swap - all dust marks gone but a bit of a smear mark on sensor! - camera shop where I bought camera 14 ++ years ago said they will clean it free - so will be bringing camera to them soon ! I think I will make it a habit to only change lenses on camera before setting out and just use camera with one lens at a time ! That is no swapping lenses in the field !! Have a 35-50 and an ancient 135 with goggles ! Get vid thanks !

Thankyou so much it solved the whole problem thanks again ❤

They really love dogs' 😁

It is 2023 now, and some things have been fixed, many others have only gotten worse... The local staff is great though.

To test for dirt etc on your sensor. Switch auto iso off, use F22 or as near to F22 as possible, select a plain background grey or white. Take an image of plain background while rotating the camera in a figure of 8 or a circle o . Why? the background will be out of focus, the marks on the sensor will show up in the same place every time you look on your monitor screen not looking at the image on your camera. Repeat until clean. Use swabs once each side, keep dirty swabs for cleaning lens mounts etc. Good luck.

Comustá, con icau ay datapouàt macilála sa atuing cabuluhán nañg báuat isá.

God bless us I like it very beautiful and relaxing place. Very nice to stay, investment and selfie selfie. In God all things are possible po. From LDN Philippines. Thank you so much po

God bless us start and end your day with our ALMIGHTY GOD. THANK you so much po

Wow Ganda pala sa las casas Taga philipine Ako pero de Ako nakaponta sa logar nato

Nice

@0:17 😂😂😂😂 I laughed so hard when I saw the condition of the equipment I think the anytime fitness just west of you (near the mall) is a better one?

So you clean peace of glass and not sensor.Sensor is sitting under two glass plates where stuff as IR filter is on the back side.

Should have watched this video before i signed up for a trial pass to that specific branch. 😭 What the hell happened 😭

Desgraça de carregador!, O certo era carregar todas de uma só vez, assim como o carregador do SPARK

i understand the logic behind not wanting to blow the air into the camera. but i would never touch the sensor with any suction device or anything else besides swabs. AND unless i absolutely have to. Just use the blower but have the sensor facing the floor and gently blow air onto it. This resolves 99.99% of the issues. If you have oil or anything of that sort on the sensor then use high quality swabs. I use Invisible Dust. Very good. Also sensors by nature already do have a protective thin layer. No need to sweat ;) Thank you

Dont buy dji drone. Go search for their battery problem. All can't charge if you store for some time. What a rip off

Wow, that was a big clean up... That sensor was nasty...

All you need to Do is Take it out for About 3 Seconds then put it back it

Pffiou ! Happy for you that it worked !!

Same for me. I had to send back one battery brand new and ask for a prompt replacement by DJI. Didn't try to charge in a lower voltage charger anyway. I will the buy a couple of old Mini 1 batteries. They aren't Li-Po. The old ones are Li-Ion and are safer and don't have all these issues.

Same problem! 🤬

I had the same problem today. It disn’t charge in the drone nor in the charger. I connected the usb part in a computer to expect a lower volatge and it fixe the issue. The batterie start charging. So I putted back in the drone and test charging with the power bloc provided by dji. Works fine. Then tried back in the regular charger and it’s charging fine. Hope this will help others. It can also be that the battery was too hot to charge. Searching for a solution took 5 min and the battery may had cooldown. It was hot. 48 deg C in the application.

Yep same here in Ontario Canada. I had to charge all 3 batts in me drone eh!, one at a time I charged them sweet little packs of plastic dam!. I can't wait to fly this wonderful piece of technology

Look at page 25/51 in the uset manual v1.2

I have the same problem in a new, never use battery from the combo kit. I think it´s the battery cells with different voltage. This one in my case it´s the battery that come inside the drone, not inside the charger. To fix this issue we need to charge the battery a few times to cycle the cells but this is my tip, not sure if it works because my combo kit just arrive today. I only made my first charge on this battery and I immediately notice this problem, then I did a Google search and I found your post. I must add that this battery is full functional and work as expected, but if I am thinking correctly, I hope the cells back to normal after a few chargers or this battery will not live longer and can crash my drone. I will keep a eye this battery cells for sure and if after a 3 or 4 cycle chargers my keep lighting as yours I go send my back to Dji. Anyway this a mistake by Dji send the battery inside and connected to the drone. But the problem can be something completely different, I have mine for just for a few minutes, I am just using my knowledge about battery's and speculating about what problem can be.

Why would you even consider it ... ? Wipes are cheap... Leica expensive....

Same here

Mine does the same blinking. But battery opperates normaly. Before a while i let Mini 2 hovering in my living room for almost 15mins till bttery reached 55% then put it on the hub. it started charging normaly (normal led behaviour) and wheh it was full then the 3rd led started blinking like in the video. Put battery back in the drone and it was 100% fully charged. Weird.... Maybe I'll contact DJI Support on Monday.

Did you check the metal charging prongs in your connector for lent or dirt? Or try to put the battery in a different slot. Also, I try not to charge the battery when it's hot, No particular reason but it just makes more sense not to charge it when it's hot.

Same problem here. Looking for a solution. This thing is brand new.

Ok super weird... I chatted with DJI support about it, they told me I had to return it for repair/replacement. I returned it to the store for warranty (also included the charger). The store verified the problem. They sent it to DJI (I live in Manila, Philippines). After two weeks they got it back. DJI said that there was no problem with the battery and everything worked fine. I have it back now, and for some reason everything is fine. I have no idea if they did anything, they said not... It is working now...

I’m having the same problem. Have you founds any solutions? Thanks

So glad to see it worked out! Would have cried my eyes out in your situation ☺️

When you were blowing dust from the lens right next to the camera, I wanted to scream "noooo":) so happy for you!

useful. can you be more specific. What is the product brand name and what company did you order it from. I'm pleased that it has worked for you. I have an M10 also and I'm in the UK.

Dat was spannend.

What is the problem ? Mine does the same

Hi Bram Platel, This video is amazing and we loved it. We would like to ask permission if we can use this video in a facebook post featuring Las Casas Filipinas De Acuzar? If given permission, we certainly credit it to you by adding a link on the description including your channel name and with your social network details. Looking forward for your permission. Thank you very much. More power!

Mala Italy😍😍😍

Ang gandaa😍🤩

ruclips.net/video/5MZAUqTTHag/видео.html

Very nice and beautiful place 🤗🤗 ruclips.net/video/niVI9zdaDcA/видео.html

Great video, was here in 2017 and I will definitely come back !

Nice video. Lots of greets !

How I wish na mka Punta aq dto pag uwi ko pinas

Beautiful Philippines