Видео

Finally I am able to get something. Thank you.

What cose error f55

您是否需要LFP/NCM电池，随时联系我，我会免费寄给您

A very good product.. durable, reliable enough and worth to its cost..!!

this covers less than 50% of SPD selection. Of course, what he mentioned max Uc, means a system can work at such voltage when SPD does not act, this is similar when you buy an socket for a lamp or oven, you get to know its voltage is 120V or 240V. 2nd factor is the absorb power when SPD won't be damage, like you cannot use a 12V dry cell to start a car, SPD power has 20KVA to 100KVA or more. 3rd one is response time, ...

have you added PSW-B to use PhocosLink Cloud?

How can I get your contact

How would someone go about connecting multiple solar charge controllers to multiple bus bars which link large amounts of batteries in multiple strings? Just as an example, say someone has five strings of 100 amp 48 volt batteries connected to bus bars. How would someone charge all of these using the multiple solar charge controllers? How would they do it if they cannot find bus bars to fit the total amperage necessary to match the charge rate of the battery bank?

What charge controller do I need for my 48V 5kw Phocos inverter

Other videos srate that it’s not the voltage but the internal resistance of the battery that determines the output of the charge controllers. So having identical controllers is not essential.

We are having difficulties with an AnyBridge: Connected to AnyGrid 6.5kW 48V 120VAC via RJ 45 RS232 cable Connected to AnyCell 5kWh 48V LFP ESS Green Power LED NEVER lights Yellow status LED is ALWAYS ON - no flickers Mobile Link App on Android can connect to AB and shows data from inverter however AB-PLC does not appear as a device and is not configurable and AnyCell does not appear as a device either I notice that the first connection attempt, we did not need to pair the device - it just connected automatically. SUbsequently we needed to first pair the device. With further farting around it appears that the AB does not properly gateway CAN2 traffic from ESS to inverter we get error 61 Even when pushing reset - no flickers from LEDs. It is interesting that the ANYGRiID does not show any status information of the AB - mandatory. Any ideas for resolution ?

Dang this in morocco

i really appreciate your explaination which i have been looking for a long time...I do have an inverter with 450 vdc input and i notice even with the spd, the dc input alway get burn, now I understand that i have been using over rated spd of 500v and above

Thank you sir, this really helped me understand how this can work for future needs.

With the cost of the freezer we added delivery fees by land and then river barge delivery fees, bringing the total cost of this freezer (FR350-B) to just under $5000.00...and now with the purchase of a new ECU it puts it over $5000.00. In the three years we have had it, it has worked a total of 9 months....Just installed the new ECU and it still doesn't work...installed a new thermostat and it still does not work. So, if you live remote like we do, I urge you to shop around for alternatives.

Thanks for your videos, but please speak clearly and turn off that background music. It is difficult to understand you clearly at times.

So for a main system with (3) 175W panels in series charging a 12V 230Ahr LFP battery, I could use my portable 200W panel to speed up charging?

How do you factory reset a psw-h that is showing f90 as an error

This is by far the absolute best video explaining these devices. However, what would have made it even better would have been to show how to connect the actual devices, and explaining that these are a onetime use for a large spike and they can't be reset.

How to calculate soze of ac spd for type2

His agent's service is so poor

At 2:31 you address the noticeable different charging from different controllers. Many of us are calls this fighting and unproductive charging. Some controllers even have communication ports to stop this fighting. If you had a video addressing this subject it would be beneficial. I see quite a few of these are being made, and they don’t agree with each other.

Am a technician in South Sudan, one of my customers bought the phocos any grid PSW-H 5kw and really nice, we request at least if you could adjust your business and establish a company show room in juba South Sudan we are ready to cooperate with you

Hi, so i have a 24v 3000w PowMr inverter. I attached a portable 400w solar panel but there is no solar displaying on the inverter. I'm getting 36v on the solar terminals coming from the pannel but the unit shows no solar displaying. The grid is charging my 24v battery and powering load but no solar

Hey bro i have 6.5 kw solar system it has a fronus inverter and 4 batteries it is not charging above 55

how much price inverter

Thanks

I have 12 panels connected in series, the total open circuit voltage of the panels is 578v DC. Would a 600V DC SPD be sufficient to protect my setup? Also what about the wire gauge of the ground wire, I am using 9AWG ground wire.

Hey. Thanks for this. How about charging batteries with generator? Inverter does not seem to take generator output.

Without solid state relay we cannot set up anybridge module?

Thank you

My PSW-H 5 kilowatt 48 volt inverter blast today please help

Hi, I have done the reset. But when entering my credentials for the wifi setup, the page just dissappear after I press setup and I do not receive an email?

How long do u have to wait to receive the email after submitting your wifi credentials

Is the ssid the wifi network name?

مرحبًا، هل يجب عمل تحديثات لجهاز الفوكوس عندما يظهر خطأ F90؟

How many strings can I connect with one SPD. For instance, can I install three strings of 95V into one SPD of 500Uc

Thanks sir I have 6kv inverter. Our inverter is not charge the battery from solar pannel. I don't know But i connet utilise then charge from solar and house load transfer to utilities. But solar power available sapare more than 2000watt . Thanks

LOL. so confusing. man, why the heck do they make words that make no sense. It's like say my i have a 1" inch thing but it operates at 12" or sometimes 0". see what I'm saying.

Hi my inverter wont save the settings anymore

Hey, i have a problem with phocos inverter. I have uploaded shorts video about it, any advice?

What type of com cable is used between the inverter and any bridge the one you connect on the RS-232 port?

Mohamed, please help me with my solar layout for my van

"Fantastic news! The new firmware update for the Any-Bridge is a game-changer. The ability to have more control over our systems through remote control directly from the cloud is a significant step forward. Kudos to Phocos for their commitment to providing reliable and high-quality products. The automatic update feature for all Any-Bridges connected to the PhocosLink Cloud is a great example of how innovation meets convenience. Looking forward to exploring the enhanced functionalities this update brings to the table!"

Hello, Y have an eror code to an Any grid 5kw , eror code is F 90- wat is the meaning of this?

Hello if I accidentally updated my hybrid inverter with a wrong version of the software, how do I factory reset?

Thanks for the video but i need your help i have 2×200w, 1×265w 1×270w, 4×415 watt panels, 8×280ah lithium batteries series to make a 24v system so my question is what size charge controller will i need to run my system i have a 60a charge controller but i recently bought the 4×415 watt panels so how much more amps do i need to run all of my panels all of my panels are 24v

How about the floating charging and equalizinh charging?

The inverter is capable to work only with pv power? Without grid as reference?

Kindly read your manuals. Some of these new inverters can run without batteries or a/c input. So long as you have enough panels to generate the power you need it will run.