Видео

Thank you for sharing this tip with the world. Helped me out when I was getting frustrated.

Thanks for the simple straight forward video!

Not good. Not only was the instruction incorrect, you really struggle with your presentation. Practice more. Change your lighting. Reposition that 300 w spot light over your right shoulder.

Great video. Did you put any finish on it? I made one, and when I painted it, pieces never fit right again. Guess it made wood swell.

Nice work my Brother ... Looks like a fun project

I did it too. This is what I used Woodglut designs for

I have one, and it’s very handy, but it’s not level (sits higher in the middle compared to the wings), which is frustrating!

you didn't mention how you use the first tooth to calibrate the spacing

how long and wide is your punisher

I’m on RUclips now as the instructions are poor and that is being kind.

Hi friend. Which Brand and model is your table saw on this video? Can you tell me plese? Thanks

Thanks for the video. I make these flags and just bought one of these tables. They are awesome. To me, its a must have if you make alot of the wooden flags. Good luck!

Just wanted to reassure you that challenge in following the direction/instructions was not on you....I had read several reviews in regards to how wacked the instructions provided were prior to attempting to follow them myself and found their complaints to be spot on....Bora, in lieu of providing instructions may want to instruct the buyer to refer to RUclips.....just saying!

You've got your assembly all wrong :-) You need to use 2 round bolts ! And insert this metal thing with another end toward direction of the cut. RTFM! -)

How much I would like to buy one

Dude... please wear your safety gear. You have no safety glasses on, no hearing protection, and your cutting mdf without a mask. I care about you and want you to live a long and healthy life. Please take care of your body.

This guy didn't even assemble it correctly - the nut within the curved portion has to go into the long slot of the track extension. You won't be able to move the featherboard from side to side, because the S-curve bolt can't move.

@zevert question for you- so with a featherboard, do you not need a pushblock anymore to rip the wood through? (and just a simple pushstick instead?)

Woodglut scripts contain most of the woodworking plans you can find.

How can i order one of these?

How can you stand your shop so hot, steam coming from your mouth; and wearing a flannel shirt to boot. :) Nice vid, thanks for the good review, I think I am going to pick 1 up.

The feather board was not secured at all.

If you want to make it yourself just look for woodprix. There is all you need to make it :)

I wish I had a separate spot for all my bicycles and other stuff, it would make it much easier!

Use the countersunk bolts in both sides. That way you get more consistent tension on the insert & smoother movement. I only use the flat sided bolts where the inserts don't fit.

I like the little spot you have for pencils and tape measures!

The seat of my pants is how I do it most of the time too. Unless the material is expensive or scarce (like during the lockdown, no hardware stores to go to, so planning was more important!)

No knife on your keychain or a Leatherman?

Keep up the flow man! Keep putting yourself out there.

that is a cool story, especially that old quick clamp! It's interesting to see how they have changed over the years

That's a nice collection of magazines. I am jealous!

Good tip, but your thumbnail got me with it's clickbait. I was hoping for something about tacos!

Very good tip!! I haven’t ever checked but definitely will now

Good tip!! I didn't know this was a thing!

I like how you didn't clean up to much, that's how I like my shop tours!

It looks really great I do a few puzzles on the Scrollsaw I usually do the outside cuts with a no.7 blade try a no.2 for all the inside puzzle cut I just really take it slow I’m slow cutting anyway trying to stay close to the line I’m not very good at it very rarely break a blade they seem to fit tighter I enjoyed your video

MAGA man. You are smart.

just a quick tip vary beginner just like to help people save money.

Your skills have come so far. So proud of you babe!❤

Your skills have come so far. So proud of you babe!❤

Great video mate.

let me know what you think of the new format with the videos. I am trying to incorprate some humor into my videos. I personally dont like straight lessons and boring videos. Let me know your thoughts.

What are some other tips and tricks do you want to see?

The very next day I emptied out the shop and completely rearranged lol

I absolutely loved this build I may build o bunch of blanks and have them available on my etsy