Видео

To get you started all 52mm Gauges come with a pod and bracket kit to mount the gauges included FREE. Depending on the vehicle you have, there are various aftermarket pillar pods designed for 52mm Gauges. Here are some links to some good Aussie retailers for pillar pods! kenaykustoms.com.au/ facebook.com/hncustoms/

The Colour Pre-Warning (CPW) Function is only on our 52mm Temperature based Gauges. All JRP 52mm Gauges can be set up to have the same running colours, but then you can be "Pre Warn'd" as temperatures rise up to the final warning alarm. Have a chat on the phone or with our tech Team over Facebook if you want to know more :)

Thats a fair comment, Thank-you @ricks_Toys, Fuel level was replaced with the highly requested Volts#2 over 5 years ago. Sadly there wasn't enough demand for fuel level, so it has since been superseded, we do have a fuel level gauge in the Edge series that might be worth checking out: www.justraceparts.com.au/digital-universal-fuel-level-gauge-kit-52mm-edge

@@JustRaceParts sad to know, all I need is shift light coolant temp and fuel gauge. Boost, oil and voltage I don't mind having separate gauges for

See the link below, we have a Tacho/ RPM gauge that will change colours leading up to your redline giving you that shift light feel. You can configure these colours so it only goes Red closer to the red line, Talk to our techs on the phone or Facebook Messager for more info. ruclips.net/user/shortsVF9ynXUcNls www.justraceparts.com.au/digital-tachometer-gauge-rpm-shift-light-52mm www.justraceparts.com.au/digital-water-temp-gauge-kit-52mm-edge www.justraceparts.com.au/digital-universal-fuel-level-gauge-kit-52mm-edge

No worries, At the start of the video enter the System Setup menu, and select "Units" with the warn set button. Then you can use the arrow to make global changes to the units. While highlighted you can then use the buttons on the screen to change to PSI/ KPA. Any support questions please send us a message on Facebook, or give us a call Mon-Fri 9am-5pm AEST 07 3149 3443, Expert sales or our qualified technicians will be able to walk you through further enquires ;) Zac - JRP Team

G'day Shad! Epic, Thank-you so much for your continued support! People like you spreading the good work from JRP helps us develop and bring new meaningful gauges to the market. Cheers! 🍻 Zach - JRP Team

Thank-you for your kind word, We go to allot of effort to support our users of the JRP 14in1 Multigauge. If you have anything you need further help with, Send us a message on Facebook or give us a call Monday- Friday 9am-5pm(AEST) 07 3149 3443. And a product expert will be there to help ;)

Absolutely! Thats a rare issue, but an easy fix! Sounds like a factory reset will fix that, send us a message on Facebook and one of our gauge technicians will work through the issue with you one on one. :) They will run through some extra things to look out for, and go through some prevention techniques to ensure this doesn't happen again with your setup. Give us a call 9am-5pm(AEST) 07 3149 3443 or message us on Facebook, we are here to help!

@@JustRaceParts it’s been working today but some days it won’t

@4x4boys42 You have a power issue with you vehicle! You will need to contact our customer support so that we can check a few things in your setup that will be causing this intermittent issue. Please call Monday- Friday 9am-5pm(AEST) 07 3149 3443 or message us on Facebook, we are here to help!

Hey @deanhargreaves6164 For one on one technical support please send us a message on Facebook or you can call our office (AEST) 9am-5pm Monday - Friday. 07 3149 3443 Yes you will need to power the gauge with 12v DC power to calibrate and use this product.

@@JustRaceParts do I need to do this same to the oil pressure ??

For support please send us a message on Facebook or you can call our office (AEST) 9am-5pm Monday - Friday. 07 3149 3443 Did you get in contact with a member of our team? RUclips comments are only monitored once a week. In most cases its not necessary to do this with an oil pressure gauge, but it can be done. Get in contact with us as you may be chasing a different issue, Thanks! Zach - JRP Team

Thanks for the message, YES! the 14in1 does a whole lot more! This is like comparing Chalk to Cheese! The Ultragauge is a OBD2 only Scan style gauge that reads information from a factory ECU, great for people that want to see some of what the Factory Dash wont tell you. Where as the 14in1 is standalone system using JRP Sensors, coupled with a central control unit to display advanced warnings only possible from multiple inputs. Plus you can use addon features like Head Guard Ultra and Aux Relay triggering controlled from this small little unit. OBD2 can also be used to pick up things like Tach signal. But the 14in1 is designed to use our sensors first, these units can be installed in carburetted engines with No OBD2 at all! Any questions, please send us a message on Facebook, were happy to help! ;)

Thank you @andrewt3952 for your honest feedback. We have passed the information on to our R&D team and we will be putting the screens through the ringer to see if we can replicate the issue and then solve it for a later revision ;) We really appreciate your kind words and we will continue to service all our customers as best as possible! Kind regards The JRP Team

We do have a Dual Boost and EGT Gauge that will display boost in both "BAR" and "PSI" up to 7 Bar or 99PSi! Call us or send us message on Facebook, The team is very active there weekdays ;)

That's a great question, the v2.5 model only has the one colour on the OLED display. We went this route as OLED technology is far brighter and more versatile when being viewed in the direct Australian sun light. At time of production comparable colour changing LCD were not bright enough to view in direct sunlight. We are working with the factories to develop a suitable colour changing panel in future generations of the 14in1 Multigauge.

@@JustRaceParts Thanks for the reply! That reasoning makes heaps of sense, I look forward to future generations.

G'day @chrisasaurus! Yes The JRP 14in1 Multi Gauge will read and display Fuel Pressure for Petrol Vehicles with the included 10bar Fuel Pressure sensor. If you Plan to run Ethanol Based fuels such as E85 or E10 you will require a different sensor which can be purchased here: www.justraceparts.com.au/e85-fuel-pressure-sensor-npt This sensor is also suitable if you're getting crazy contamination in your oil for Ethanol, or in some cases customers wish to monitor coolant pressure or exhaust back pressure. Any further questions call us 9-5 AEST Were a Brisbane (AU) based company, or you can always message us on Facebook, the inbox is monitored during business hours ;)

Yes you can change the RPM increment and also the set RPM alarm (The colours work backwards from there). You can check out the product support page here, with detailed written PDF instructions going though all this www.flowcode.com/page/jrp-edge-52mm-tacho-manual Send us a DM on our Facebook page and we can take you through setup as well ;)

Absolutely! You can set the "UO" setting to silent and it won't beep once you hit the set alarm value ;) If you have any other questions, please send us a message on Facebook, or an email to sales@justraceparts.com.au and we will respond faster there as we check RUclips comments periodically.

Thanks for watching through, Yes! All Sensor inputs can be set to have custom alarm values for the JRP 14in1 Multigauge monitor. There is also an Advanced Alarm setup video you can watch which covers some special features that requires multiple sensor input conditions to trigger special alarms. You're welcome to send us a DM on Facebook, or arrange a call with our tech support team if you need further assistance! - JRP Team

Hello kamaljengka9882, thank-you for watching! To change the Multigauge units from MPH to KM/h you can follow the first section of the video. Press and hold the "Rec/ Play/ Warn button", and make adjustments with the up and down arrows. This is also covered on Page 23-31 System Setup Menus. Also see the Change screen layouts section of the video from 1:49, this is where you can change the location of where tacho or km/h is on the screen display. If this wasn't quite what you're after, please send us a message on Facebook or call our office, we can provide one on one support for you. Thank-you JRP Team.

Hey dylaneagleton3090, Yes all our alarm inputs are able to have custom set alarm values for that 14in1 Multigauge system to monitor. Send us a DM on face book, or arrange a call with our tech support team if you need further assistance ;) - JRP Team

Hi MrJanMuhic, We have a new Edge Series Gauge coming soon which will display Oil Pressure In Bar as one of the options. Keep, an eye on our Facebook page for the release around April. This will be like our Dual Boost and EGT Gauge ;)

Yes! Our tacho works with one cylinder engines! Have a look at our support page and download the PDF manual for in-depth instructions : www.flowcode.com/page/jrp-edge-52mm-tacho-manual. Alternatively we also have great Tacho adapter accessories, that can deal with around 90% of crazy applications. www.justraceparts.com.au/automotive-adapters-converters Email us, or reach out on FB Messager for one on one support ;)

No sorry, We develop dominantly stand alone systems, there's no current plan to use HDMI.

That's a great question, thank-you! Tacho into the 14in1 only requires one input on the BLUE Wire of the SP/TA port. Sourcing this signal can vary depending on vehicle and engine setup for your application. We sell a few supporting products that can make this allot easier if your vehicle doesn't have a standard tach configuration already. Contact the JRP Customer support on FB Messenger or call us between business hours 9am-5pm, AEST 07 3149 3443. ;)

Thanks for the support @yam4wd We love seeing our products intergraded with all sorts of builds! Keep up the good work, check out some of your videos ;)

Yes Absolutely! JRP have developed various supporting products often supplied to auto electricians to assist with different tacho scenarios. Call, email, or Facebook DM, and a Tacho Tech expert will make sure you have the right combinations to work with your setup. :)

Hey, Thanks for the message! We do have installation videos planed with our channel and collaborators in the future. Remember each vehicle manufacture is different, and you may need to do a little independent research for your application. For now you're best off calling us during business hours and were happy to assist you over the phone and point you in the right direction. www.justraceparts.com.au/contact-us

Hi mate general rule of thumb for egt gauge is post turbo so go about 100mm off the back of the turbo and make a spot or use the already made spot (most aftermarket exhausts have the thread and spot ready to go). Boost gauges are recommended to be somewhere along the intake/intake manifold. Oil pressure gauges you can get sandwich plates that go on the block inbetween your oil filter and the block so you remove the oil filter screw the sandwich plate on then screw the oil filters onto that and your gauge screws into the sandwich plate and never had to be touched again. Hope this helped

@fergusnorris6694 Pretty much nailed it! Our EGT V3 has been specially developed to withstand extra harsh conditions and can deal with both pre turbo and harmonic vibrations from diesel engines! Don't forget to calibrate your boost gauge to zero after installation ;)

Thanks for the message, Your best off emailing or calling through for more accurate information. Spartan 3 Can has been used with Haltech products and can be custom programmed. Older ECU's and data loggers can also work with the analog 0-5v linear output.

@@JustRaceParts will do! Thankyou

Thanks for the support, we hope you liked the video, and checkout our website for a ton of information on each and every product we produce and sell. :)

Yes they can be used on motorcycles, However they're not water proof out of the box. Some customers build enclosures, or back fill with epoxy resin. They have been used on: motorcycles, boats, race tractors/ lawnmowers, cars, hovercraft, even areophane's. Open to your imagination! ;)

Hi Paul, Thanks for the message, We see you emailed through to sales and we responded in detail there. For others reading, Yes "Fuel Pressure" can display in PSI, regardless of the temperature units chosen, carefully go through page 24 on the pdf manual. You will need to use a combination of the hand controller and buttons on the screen. Cheers! :)

Call or Direct message us on our Facebook page, we should be able to assist you further (send through some photos). There are one of 2x foam styles tapes that have been included depending on the age of your purchase. We have a Gauge mounting video as a work InProgress at the moment. Thank-you

Hey thank-you so much for the feedback, Check out some of our other support videos on these product lines. Don't forget to checkout the Guys at Aussie Arvos!

G'day Gaz! We're not 100% sure what Patrick's running here, but we can speak highly of Kenay Kustoms, supporting another local Australian business. See link to shop below: kenaykustoms.com.au/product-category/gauge-mounts/

Hey Vic Gon, See below 😉 www.flowcode.com/page/jrp-14in1-manual-support Check out the 14in1 support page, there’s a large instruction manual, and helpful setup videos. The screen and sensor base pack are a stand alone unit and don’t require OBDanything to operate, they work with Carbureted engines that have no ecu. Also we’ve even had customers install this system in boats, hovercraft, race tractors and aero-planes. If it has an engine, this system will work with it!

Thanks for your message, Yes you can absolutely connect two screens! These can then be set up to display different screen layouts and data too. This setup is coved on page 21, of the instruction manual. Follow the link: www.flowcode.com/page/jrp-14in1-manual-support Great Idea, We might make a video of this down the track!

Hi Alexandros, Thank-you for the message. No, Generally its best to follow the guide lines we put together in this video (and instructions) for successful installs + Spartan and Sensor longevity.

Hey JWEEZY864, We have plenty of solutions available to get the JRP 52mm Tacho + shift light working in your Kei Van! :) We also do a 14in1 Multigauge that's fully customizable with Tacho depending on what you're trying to achieve. Feel free to give us a call, or email your specific enquiry to Sales@justraceparts.com.au Cheers!

Hello Lxwis, Thanks for watching! Please reach out and call our Australian help line: 07-3149-3443 or send us an email at: Sales@JustRaceParts.com.au We can guide you through any technical issues. Stay tuned more product support videos coming soon.

Yes it sure can! Feel free to send an email to Sales@JustRaceParts.com.au for more info, Or click and read the Manuals tab on the product description on the website: www.justraceparts.com.au/digital-tachometer-gauge-rpm-shift-light-52mm

Yes. Have two on mine 👌

@@JustRaceParts I would like to purchase one

No worries, You can Jump onto our website and use the shipping estimator for the best price. If you have any questions send us a message on Facebook, or you can call us during office hours 9am-5pm(AEST) Mon-Fri on 07 3149 3443. We can get the best sales or technician to assist you with your setup ;)

YES it is the BEST practice to do so if you want to take advantage of ACCURATE Spartan AFR readings. Part of the Spartans design architecture does indeed have a ground offset used to stabilise the data readings. Please avoid using a grounds off a head unit/ sound systems! This will lead to unexpected readings from electrical interferences. Terminal 2 is best to ground off ecu ground. Feel free to call or email Just Race Parts for more info. :)

Hello, Thanks for your message, We haven’t personally tried this, But we have had customers do some pretty interesting custom things with JRP Gauges. Some customers have used Arduino or other hobbyist microcontrollers to both read and set conditions from the signals coming in and out of the gauge. So if you’re handy with DIY stuff you could definitely give it a go! Would be a cool project, feel free to send through your idea/ gauges youre hoping to run to our sales email: Sales@justraceparts.com.au and we can see how we can support you. Don’t forget to tag us in social media posts if you decide to upload videos of your project! :D

Not on the 14in1, it only supports PSI & KPA. Our 52mm Boost & EGT gauge does support PSI & BAR.

Shoot an email to sales@justraceparts.com.au mate, RUclips isn't a great place to do support. The techs will be happy to help, or even better give us a call on the office number. ;)

Did this get sorted out?

Any support questions Please send us a message on Facebook, email, or give us a call Mon-Fri 9am-5pm AEST 07 3149 3443, Expert sales or our qualified technicians are here ready to help Our RUclips Channel isn't monitored daily and is used to host videos only. Thank-you Zach - JRP Team

Thanks for dropping back in to leave that comment Andrew. Means a lot to us and have passed onto Dave. We love seeing people do tests with our sensors compared to workshop sensors, makes us feel good that those customers know for sure how amazing these kits are and aren't just guessing from our word about accuracy. Not many do it, but we love it when customer do, as we know they truly see how amazing these little units are and for the money. Lots of exciting stuff coming from JRP in 2023 & 2024, keep an eye out. :)

It works off having a compatible speed signal being sent to the gauge. If you don't have a speed signal source, you could install one of our HALL effect speed sensors, this will generate speed and in turn OD. We are working on bringing out a GPS speed module in the new year as well that can be hooked up to our systems for simpler install for speed. ;)

We don't have control over RUclips and their ads, if you saw and ad it wasn't because of us lol.

Sounds like you might have the Pink Port setting in the gauge changed to Trans Temp instead of water temp, if pink port setting is changed to Trans, you won't see water show up. Time attack should show yes, I think maybe best to do a factory reset on the unit, page 61 of the manual, that should get everything back to default and water temp will be there along with time attack. ;) Reach out to our support guys if you have any issues or questions, they will get you all sorted quickly.

@@JustRaceParts Gday guys. Thanks for ur reply. I’ll have a look on the weekend n see how I go. Like I said, I’m really happy with the product, worth every cent👍👍

Highly requested! And its now finally here! Check out the links bellow, You can now run Aux Relay triggering from IAT, Water Temp, Oil Temp and Transmission temp inputs on the v2.6 Multigauge screen and addon pack! www.justraceparts.com.au/thermo-fan-controller-temp-3x-aux-relay-trigger www.justraceparts.com.au/10in1-automotive-digital-oled-multi-gauge-display Any questions send us a message on Facebook, or give us a call Mon-Fri 9am-5pm AEST 07 3149 3443, Expert sales or our qualified technicians will be able to walk you through further enquires ;)

Hi Tim, We have a video for the 14in1 which shows the setup and info on Diesel AFR. Really the only thing to show for the 52mm is changing the gauge from Petrol mode to Diesel. The manual does cover that, and you are more than welcome to call our support guys and ask some questions. ;) Next video coming for the 52mm is an announcement of a new feature that will be found on v1.5 model Edge temp gauges, that should be coming in the next 4-weeks. A pretty cool new feature only found on v1.5 models.

@@JustRaceParts ok thnx. May I get the support guys number? Cheers

@@timothyschulz4730 Calling within Australia 07-3149-3443, or outside of AU +61-7-3149-3443.

@@JustRaceParts cam you send.me. Manual for the 52mm afr for setup, or changing to diesel mdoe

@@timothyschulz4730 Click on the manual tab on the page below, has the manual for the Spartan and also the 52mm AFR gauge. www.justraceparts.com.au/spartan-3d-diesel-wideband-air-fuel-ratio-gauge