TheGildedPiano
TheGildedPiano
  • Видео 144
  • Просмотров 218 175
Straightening Out Front Rail Pins for Rebushing Piano Keys
Here we show how we utilize a digital angle finder to quickly go through the oblong front rail pins to make sure they are straight before installing new key bushings.

Digital angle finder:
a.co/d/3NxiHIc
#steinway #piano #rebuilder
Просмотров: 375

Видео

Hammer Flange Pinning (too tight or too loose)
Просмотров 2573 месяца назад
Hammer Flange Pinning (too tight or too loose)
Finding Your Piano Serial Number (to Date the Age)
Просмотров 1933 месяца назад
All you need is the piano make and the serial number and then you can figure out (in most cases) when your piano was built. However it's difficult sometimes to find the serial number on your piano. This video should help out. "Because Life Is Better In Tune" www.TheGildedPiano.com
1905 Ellington Upright Rebuild
Просмотров 1783 месяца назад
We're so proud of the rebuilding and restoration work we do here at The Gilded Piano rebuilding shop. "Because Life Is Better In Tune" www.TheGildedPiano.com
Spinet Piano Action Removal Jig
Просмотров 1343 месяца назад
You don't need a custom threaded rod to get your spinet action out. Just a couple 1/2" oak dowels will do along with some zip ties! Check it out. "Because Life Is Better In Tune" www.TheGildedPiano.com
Loose Action Flange Pinning
Просмотров 1173 месяца назад
When a piano is subject to a dry climate, often times the wood shrinks so much that the piano action needs to be repinned. Hire a #steinway #piano #rebuilder 😁
Liquid Hide Glue Globs - New Key Bushings
Просмотров 983 месяца назад
If you’re hearing a clicking noise in your keys, it could be due to dried glue gloves. This sometimes happen when you install new key bushings as was the case with this Steinway keyboard. Hot hide glue is the traditionally recommended glue for bushing keys, but we have discovered that you can also use StewMac Fish Glue. www.amazon.com/StewMac-Fish-Glue-8-ounce-Bottle/dp/B01MQKNC5C. It's what we...
1900 Steinway A2 - Removing Long Bridge
Просмотров 554 месяца назад
1900 Steinway A2 - Removing Long Bridge
Buzzing Piano Key!
Просмотров 924 месяца назад
Discovered a tiny piece of wood that was causing one string to distract the musical experience. #TheGildedPiano
Plugging lead holes in old key sticks - KEY WEIGH OFF
Просмотров 1836 месяцев назад
When shooting for an ideal touch weight (how easy or hard it is for the player to press the keys) parts replacement may be necessary and/or the capstan may need to be moved to achieve a better action ratio. Regardless, the leads in the keys will need to be weighed off. Old leads need to be removed, holes plugged, and the keys re-weighed. This is a quick video showing how we plugged the original...
The Gilded Piano: Upright Full Cleaning Procedure
Просмотров 29011 месяцев назад
While our technicians provide a quick complimentary dusting of your piano with every piano service call, we also offer a full cleaning service for pianos that are in need. Our technicians follow this procedure when you pay for our full cleaning service on your upright piano. The following links are provided for the convenience of our technicians, as well as customers who might be more the DIY t...
Piano Too Loud? - Soft Pedal on a Upright Piano!
Просмотров 3,6 тыс.11 месяцев назад
Don't go crazy listening to your kids play scales and exercises! Use the soft pedal. Most upright pianos have a middle pedal that can lock the mute rail into place (push down and slide to the left). If it doesn't work just call us to come out and give your piano a tune up. www.TheGildedPiano.com You're welcome. :)
Steger & Sons Custom Restoration - Before & After
Просмотров 260Год назад
It's exciting to complete a custom restoration project, especially a family heirloom from 1914! Call us at 801-410-0018 or go to www.TheGildedPiano.com to find out more, or to get a quote to restore your own family heirloom piano. A special shoutout to Bryce McKay our in-house master rebuilder. Duncan Peterson, President Steinway factory trained, Registered Piano Technician
Rattling bass strings on a grand piano
Просмотров 3 тыс.Год назад
Here is an easy solution for badly buzzing or rattling bass strings on this 40-year-old young Chang parlor grand. Watch till the end to get a tip on polishing tarnished, fallboard brass logo! 
Chloe's Crochet - The Beginnings
Просмотров 75Год назад
Chloe Peterson tells of how she began it all, learning from her mother, getting up the courage to sell to neighbors, and her most recent venture! She's raising money for marching band, and various other things she wants to do. To purchase a tie from Chloe's Crochet email info @ thegildedpiano .com or send money to account.venmo.com/u/thegildedpiano.
Jose Cabrera post-graduation speech
Просмотров 27Год назад
Jose Cabrera post-graduation speech
How To: Use a Tuning lever tip wrench
Просмотров 342Год назад
How To: Use a Tuning lever tip wrench
Grand Piano Soundboard: nose bolt locating and drilling
Просмотров 223Год назад
Grand Piano Soundboard: nose bolt locating and drilling
Upright Piano Cleaning
Просмотров 99Год назад
Upright Piano Cleaning
Spinet Piano Action Removal Jig
Просмотров 672Год назад
Spinet Piano Action Removal Jig
Sluggish key repair @TheGildedPiano
Просмотров 912Год назад
Sluggish key repair @TheGildedPiano
1910 Vose After Refinishing YT
Просмотров 177Год назад
1910 Vose After Refinishing YT
AFTER! 1910 Vose & Sons Upright Piano Refinishing
Просмотров 205Год назад
AFTER! 1910 Vose & Sons Upright Piano Refinishing
Push ups on a nail bed
Просмотров 117Год назад
Push ups on a nail bed
Welcome to The Gilded Piano!
Просмотров 432Год назад
Welcome to The Gilded Piano!
Is sugar healthy?
Просмотров 752 года назад
Is sugar healthy?
1955 Steinway S Demo
Просмотров 3182 года назад
1955 Steinway S Demo
1955 Steinway S Restoration
Просмотров 1742 года назад
1955 Steinway S Restoration
4 miles Barefoot Hiking (to Stewart Falls)
Просмотров 4802 года назад
4 miles Barefoot Hiking (to Stewart Falls)
Jansen Standard Adjustable Artist Bench
Просмотров 3722 года назад
Jansen Standard Adjustable Artist Bench

Комментарии

  • @maxmokiychuk2101
    @maxmokiychuk2101 3 дня назад

    Cooool 👍👍👍 That guy with the guitar is top

  • @NosferatuPsychosis
    @NosferatuPsychosis 7 дней назад

    How to reveal the keys to unscrew and fix the distance between 2 keys when one key moves 2 hammers

  • @mateuszkozieja7537
    @mateuszkozieja7537 9 дней назад

    Is there any way to enhance the mute while at the same time not hindering the overall sound quality too much? I live in an apartment and really need to have a very good mute. I tried doing this myself but can't quite get the perfect balance just yet. It's either too loud or the sound quality is average and some notes played at mf sound pp and some mp

  • @Central_inteligence_agency
    @Central_inteligence_agency 13 дней назад

    I would mind a little sustain, but very good!

  • @ScottWayneJackson
    @ScottWayneJackson 14 дней назад

    Would be easier if the tool fit tighter on the pins.

  • @altodomino7859
    @altodomino7859 25 дней назад

    So you put the support on the side that you want to move the jack towards, and then you hit the top of the jack?

  • @altodomino7859
    @altodomino7859 27 дней назад

    Is that just painter's tape?

  • @helen8602
    @helen8602 29 дней назад

    Just dropped the spring under the key …. Fuckkk

  • @Tina29x
    @Tina29x Месяц назад

    Hello. I have big problem. Piano key when pressed doesnt want to 'get up' anymore. It started after spilled some liquids between these two notes. I opened piano and tried to grind wood to make it smaller but nothing. When I move nearest right key, it works.

  • @SamuelMcgrealPianoServices
    @SamuelMcgrealPianoServices Месяц назад

    Seems like it may be easy to have the tuning lever tip wrench a little wonky snd damage the tuning lever. Use causion when doing this

  • @SamuelMcgrealPianoServices
    @SamuelMcgrealPianoServices Месяц назад

    Wow so many people in the comments who know everything about piano tuning. Crazy

  • @glennisshih2262
    @glennisshih2262 Месяц назад

    Thank you so much for this video, I thought I lost my phone forever. You saved me!!

  • @tigielle
    @tigielle Месяц назад

    ... and Vince Guaraldi "close the door"☺️

  • @official2mt37
    @official2mt37 Месяц назад

    OH MY GOD THANK YOU SO MUCH YOURE AMAZING I LOVE YOU BRO

  • @altodomino7859
    @altodomino7859 Месяц назад

    That's very clever. I don't like working on spinets

  • @VirtuousPraiseworthy
    @VirtuousPraiseworthy Месяц назад

    More like this! Awesome!

  • @VirtuousPraiseworthy
    @VirtuousPraiseworthy Месяц назад

    Seriously fantastic piano. I could cry.

  • @1mmm51
    @1mmm51 Месяц назад

    How do you get the sostenuto pedal to work on an upright piano?

  • @cadriver2570
    @cadriver2570 Месяц назад

    What was the music that you played?

  • @user-jy1fi1rr4o
    @user-jy1fi1rr4o 2 месяца назад

    I would be laying my tools on a cloth, not just tossing then around on interior parts.

  • @cadriver2570
    @cadriver2570 2 месяца назад

    with the practice felt and sustain pedal engaged a couple notes rea

  • @raydensizemore4612
    @raydensizemore4612 2 месяца назад

    "horror movie sound effects are so complicated" horror movie sound effects:

  • @user-rj4xo8ki2y
    @user-rj4xo8ki2y 2 месяца назад

    Oh, how cool it would have been to see this in 1983 when I started. Then my search would be much shorter. But even now it’s very informative. Thank you very much!

  • @Geoplanetjane
    @Geoplanetjane 2 месяца назад

    Do not like. It does not sparkle.

  • @niomecapice8738
    @niomecapice8738 2 месяца назад

    Thanks a million! I had to remove the action inorder to glue a couple of key tops back on to my Yamaha GB1. This video was essential to my success. Thank you!!

  • @alext8828
    @alext8828 2 месяца назад

    Pearl River. Those guys build everything.

  • @user-nh4oh5wb3k
    @user-nh4oh5wb3k 2 месяца назад

    Для начала отшлифуй молотки..

  • @saveriosalerno9232
    @saveriosalerno9232 2 месяца назад

    On my Rosler upright piano the front oval pins of the keyboard frame are totally oval and therefore difficult to rotate angularly

  • @saveriosalerno9232
    @saveriosalerno9232 2 месяца назад

    Thanks for this video😊

  • @DuncanPeterson
    @DuncanPeterson 3 месяца назад

    1:00 Here’s an update: a few months later I got a call from the client that the buzz came back. I ended up returning to her home and removing and twisting each bass string (for free). No small expense on my part as it took 2 to 3 hours, but it was the right thing to do. So in short, the lowering and raising of the pitch temporarily got rid of the buzz, but it was not a permanent fix. When I was done with the job the second time, I told her that if the buzzes come back again that the next step would be to replace all of the base strings, and quoted her a four digit price. I haven’t heard from her again, so I am really, not sure if the buzzes have returned once more, but at least she is now empowered with the correct information, and you and I have all learned something in the process!

  • @timevaporwave
    @timevaporwave 3 месяца назад

    Nice work. Thanks for providing the opportunity to watch a full piano tuning. I am just getting started as a tuner and it's been a huge learning experience every time. I do prefer the sound of using electronic tuning apps though. I'm not sure I like this temperament, but your skills are certainly better than mine on unisons.

  • @altodomino7859
    @altodomino7859 3 месяца назад

    Not all heroes wear capes

  • @myra3769
    @myra3769 3 месяца назад

    tyyyy

  • @saveriosalerno9232
    @saveriosalerno9232 3 месяца назад

    Thanks.TOP😉😉

  • @TM-jo4wz
    @TM-jo4wz 3 месяца назад

    I’d put tape on both sides.

  • @luckysflute5011
    @luckysflute5011 3 месяца назад

    Hello, how much did all the work cost?

  • @kurtzwar729
    @kurtzwar729 3 месяца назад

    Beautiful 1905 Ellington upright grand piano. Lovely Tiger oak. Terrific tone. So glad to see big antique American uprights being rehabbed, restored and played. Great work. Bravo.

  • @CaseyWilkesmusic
    @CaseyWilkesmusic 3 месяца назад

    I’ve read about this method and others like it. Can someone please explain why we tune F3 to the fork, then tune A4 to that? The matching beats etc makes sense but the WHY alludes me! Cheers

  • @jorgeandrade20
    @jorgeandrade20 3 месяца назад

    Great tip Duncan, thanks for sharing.

  • @tunerisma
    @tunerisma 3 месяца назад

    1

  • @oleguernogues
    @oleguernogues 4 месяца назад

    Spot on!

  • @ppullman5470
    @ppullman5470 4 месяца назад

    Quit 'having fun' and showing off, you wasted a lot of time and clearly didn't leave it in tune. Best to leave it to the experts.

  • @StudioSooner
    @StudioSooner 4 месяца назад

    B3 was still slow :)

  • @StudioSooner
    @StudioSooner 4 месяца назад

    nice lol that wooden chip.....lol I love the pic/mural/photo/music notation framed above the piano! And wow what a scene....just beautiful...

  • @Pearlgiver
    @Pearlgiver 4 месяца назад

    TY! This worked perfectly!

  • @alext8828
    @alext8828 4 месяца назад

    Can I add a mute rail to my piano?

  • @W-HealthPianoExercises
    @W-HealthPianoExercises 4 месяца назад

    yep, I guess I need to change a few springs of my piano too 🙂

  • @M_m.aang.uxz.1902
    @M_m.aang.uxz.1902 4 месяца назад

    Nice

  • @chatochafa130
    @chatochafa130 4 месяца назад

    0:52 the way you edited it made it seem like you failed a video game mission 😭😭

  • @JackysMuSiqueJacksonParmar89
    @JackysMuSiqueJacksonParmar89 4 месяца назад

    Amazing