Видео

I've watched several videos and people are finding out that the GFCI has failed. You know it failed when it wont start and the green indicator light on the ON switch is off when the GFCI is plugged in. So, naturally, people replaced the GFCI switch! However, if you look at these videos, including this one, you will notice that the WHITE neutral wire is on the left side, and the BLACK hot wire is on the right. The slots that these go into, clearly say on the left "L" for LINE, and on the right "N" for neutral. These plugs come MISWIRED FROM FACTORY! Miswired electronics, which this plug has a circuit board, are prone to become defective because of the miswiring. The polarities for appliances and electronic devices must be polarity correct. What I see in the videos is, people wiring the new GFCI wrongly because. they are not familiar with wiring or don't pay attention. Ask any electrician, wrong polarities and circuit boards, are a recipe for circuit board breakdown. DON'T. REWIRE THESE GFCI's INCORRECTLY BECAUSE YOU ARE NOT SURE HOW TO WIRE CORRECTLY! Look at the slot you want to wire, "L" is for the incoming HOT, and "N" is for NEUTRAL which completes the circuit. By reversing it, you are ruining another circuit board.

Mine the wire just ripped right out by accident. Figured I'd have to throw the whole thing away. Your vid helped me realize its easy enough to take it apart and reset the wire in the correct place. Gonna give it a shot before I use it as an excuse to finally pull the trigger on an Active 2.0.

watch the overspray!!!! It's hard to get off. Too late for you though :) I had to use goof off. Nothing else worked. Not even alcohol. Also wait 20 minutes between coats.

Thank you ,you just helped me solve my problem!!! Awesome presentation of how to fix it.

The FK is EMYAT

$20 for a POS $30 pressure washer

Did the polish remove the carbon force and reapplied it?? Or did just can of take down the high spots??

SAME HERE. PLUG internal relay was buzzing and refusing to work. Unscrewed mine, and used one from another dead power washer. NOTE IMPORTANT STRANGE. The RYOBI was 2 wire not 2 + ground AND the black wire went to the SILVER screw, and white wire to the COPPER SCREW. STRANGE and non-standard. In any case when I fixed it, i attached black wire to copper and white wire to silver. seems to work.

Mmmmmmm

5:21 was not expecting that lol I’ll definitely be using that one 👌

Thanks for this video. I purchased the new GFCI plug from Amazon, swapped it and it worked. No need to purchase a new power washer. The effort was worth the $20.00 investment.

Which one lasted for more days.

keep safe❤ emyat sing

Keep safe from emyat

Keepsafe po...emyatsing

Keep safe sir and enjoy vloging...

Keep safe always from Emyat Sing

Keep safe. Always from emyat sing

Stay safe lalo na tag ulan emyat sing

Ingat po Emyat Sing

Keep Safe po.EMYAT SING

Sending support from emyat sing

Ingat po kayo Emyat Sing

Enjoy and keep safe always..emyat

sending support from emyat sing

Support from emyat

Stay safe . Emyat Sing

Be safe EmyatSing

tamsak dikit pulpak from emyat ❤

love and support emyat sing

Support from Emyat sing

Keep safe po.. EMYAT SING...

#emyat♥♥♥

keep safe love and support emyat sing

Keep safe frm Emyat Sing

Keep safe SENDING SUPPORT FROM EMYAT Sing

Enjoy and keep safe always..emyat

Ang ganda Naman Ng house nyu sir ganda Ng lugar dami pang halaman nice from emyat sing

love and support emyat sing 😊

love and support emyat sing

Keep safe everyone god bless.from Emyat sing

Keep safe po maam emyat sing

SENDING SUPPORT FROM EMYAT SING

Keepsafe... Support from EMYAT SING

Ingat po EMYAT SING

Here to support po,keepsafe. Emyatsing

Keep safe po Emyat Sing

sending love and support from EMYAT SING

Keep safe host Emyatsing

keep safe po from Emyat sing