Видео

Any suggestions on making it more water resistant? Is it even necessary? I just got the King Sling.

i'm 52 now, when I was a kid my buddy had a Clod Buster. Only thing that was messed up was if you hit it on the side with another car it would flip it so easily.

Think going grab bog hog I have LMT but I killed it the diffs are worn did center now think rear diff , only complaint is you need high end servo I probably went through 15 cheap servos in one truck 😂

Love these trucks! They are so fun

Yea this is by far the most breakages/upgrades I've had with any rc. It is a blast to drive tho

That's a great pair of beasts! Nice run down.

Yes you guys are back !! Sorry to here about the bad turn of events 😮.. after getting the bog hog we quickly realized these are not a beginner rc . Takes some skill to tackle one of these and not wreck it learning. Thank you for the insite on these, we look forward to more vids.!! What wheeli bar and straps are you using ?? Thankx and good luck !!

Dude, keep your camera still. This is unwatchable

Son muy divertidos , volaba de mesa a mesa ya que aterrizar es un desafío...en invierno son de lo mejor..

Losi did a great job on this truck. It's a real beast. Thanks for sharing this cool action. 👍👍

You definitely stripped the diff case....just change both out for aluminum or steel units

More vertical shock mounting will help with the torque twist and trimming the body on the rear and or front if need be Nice rig....also you mught be able to find some double bend links for suspension as well and they might help with clearance issues or maybe not...I'm still learning this crawler thing myself lol....but theres a ton of stuff you can do that truck depending upon how much money you willing to throw in it

Nice bash session. You really drove your Typhon hard and got some great landings even without a wing.

You guys are getting good with these machines !! Looks like an awesome area to run these in. How big is the track going to be ?? Great video !!😊

How much did it cost to fix?

Subbed small community !

#1 enables break / fwd reverse 2 is break drag force. 3 is LVC 4 is punch.. 5 break force 6 reverse force.. 8 timing 10 bec voltage..

If your programming it by the beeps .. They changed the firmware my manual was wrong but it had an ESC program sheet which is correct... If you installed a new spectrum ESC and used the programming info in the manual you had you will have issues.. Oh all arrma 6s stuff is fully interchangeable you may need a group of parts IE upper lower A arms axle and steering link.... The same goes for their 3s stuff.. If you find the 6s too difficult to work on get a 3s almost no screws..

They don’t like water as much as they say they’re waterproof . It’s the reciever box , water gets in somehow . The esc s are sealed mostly . It can get anywhere . The 4s outcast gets hardly anything inside when driving in leaves unlike my k6s and granite gets a ton of stuff but them high v2.5 outcast body things might fit . Just a thought for myself to check out . Anyways I finally got my k6s dialed for track bashing . It’s a max6 1650kv with a 20t and punch @ 2-4 gives really good action of the throttle the whole way the trigger travels . Full speed can pop the front end up at any time and it’s way fast already . It doesn’t seem to pop up with 4s LPs tires though amd scoots rather nicely . I was thinking as much punch but it’s not fun to drive when the front wheels are so easily triggered to come up so yeah , punch 2 and it’s amazing throttle control . I thought at a time an 18t pinion was its max but this 20t seems to keep everything in parameters according to the esc Bluettooth app thingy readings had RPS around 28,000 and max esc amp @ 360 spiking is high for a 200 amp esc . It’s between 80- 160 with this set up and temps around 100 for engine and esc is a little higher always around 120 . So I can bang on it for a while without having to stop for heating issues . A 6s typhon might be my next project . I hear they’re good jumpers but I was also thinking the 3s typhon does pretty much the same thing and doesn’t need upgrades. Kind of like the granite stock . Actually the wide kit on a granite is a bonus and Pat least one steel diff and pinion in the rear imho . I think the next thing I’d like to try is take the extra 6s system and throw it in the 4s outcast and run it 4s and then take that 4s system and motor and move it over to the granite since I think they both could use a little more acceleration power . You know how we get used to things . New bearings can do a lot but sometimes a little more power is nice to have. The main reason would be to keep the motor running cooler . All my 3s and 4s RC s from arrma all lvc with a couple full throttle runs . I ll make some vids brother .

😮😮😮 that looks really bad !! Nice vid !! Crazy action. Not sure if we like the 1/10 or 1/7 .. great info on platform. Lovin the track its looking really cool !! We actually appreciate the amount of info you provide, wouldnt mind seeing and hearing more on the wrenching and tuning..!! Thanks

Looks like a beast!

That is super cool. !! Awesome body design. Sure likes to put it all on the back two wheels.!! Definitely want to see how fast with those tires on it..!! 😮😊

This video is nice because it's like the pits around here. I bought a new Bog Hog a year or more ago but I never rode it. Once on grass maybe 20 feet.

Woow !! Ok im sold on how tuff they are.. nice driving. Great video !!

I have the cf Omni . While it’s a great ground ripper it can bash with the good ones . 3s stock granite with a wide kit is a good 3s basher but 4s and 6s is what I really like to use . Although those darn 3s arrma platform can be make some good mix and match builds . 4s lp s on a granite is my favorite .

Good information . Just found the channel . Yes , I agree with sticking with a couple RC s and making them great . I started with a Kraton 6s and knew I was over my head , lol. It sat for a while before I really bashed it , then I got a granite and really liked it , then a 4s outcast . I figured to stay with the same company besides the rlaarlo cf Omni I picked up . Sticking with the same company has made it easy for me to keep extra parts , esc s . I got a max6 g2 1650 combo for the k6s amongst other upgrades and it’s allowed the possiblility of adding a 6s system to a 4s and a 4s to a 3s . I haven’t yet because I was thinking they’re already good enough and upgrades sometimes aren’t as good as we think they will be imho . Some are , some aren’t . Now that I have 4 good ones I’m pretty good . I’ve upgraded a granite into something really cool and might try a longer chassis sometime in the future . It’s able to withstand and power 4s backflips with a wide kit and lands like a cream puff, I love it . They’re all good . The inky car that hasn’t gotten anything besides some M2c pistons work awesome on 4s shocks becasue there’s no bladder . Yeah , it can easily get out of hand . I clean them with a spray bottle and co press or or mini hand held when away from home . I ll never pressure wash my RC s that totally awesome at dollar general mixed with 50% water works good for me and a can of blaster dry silicone lube for the bearings has kept them nice . It foams and soaks into the bearings like the overpriced cow RC stuff . I looked at the cow RC prices for chemicals and started laughing . Why overpay for something that does the same thing as the chemicals at my local Walmart . I guess everyone has to do their rc their own way . I just use what works for me and makes sense . It’s been an interesting journey . They’ve come a long way since I last messed with RC s back in the 90s . I will say the kcrc ramp has been worth the $250 and handles a 1/8 size k6s . Pretty good . 👍. I hardly break anything using the blaster silicone lube to keep the plastics soft . Long comment but who cares ? I learned not to grab a flexible wing mount and carry the RC 😂, they will tear above the screw . So not I’m taking the old wing mount and going to boil it to see if it helps but I’ve broken a couple screws inside the shock tower is why I switched . Tires is another thing , eventually the foam goes compressed . I ve seen people use the pool floaty noodles for new foams . Ok til next time

I wasn’t aware that either vehicle had a gyro….unless you upgraded it after purchase.

Yes finally out!! Looks great !! Rips too.. really want a kraton too. Nice vid !!

This helps a lot! Taking them apart and working on them always seemed intimidating. I may upgrade mine now!

Thank you so much for the insight of this hobby. This gives us a lot to re think.. we love rcs, our family is really getting into them. This helps us in what direction we will go with rcs.. excellent video.. would like to actually here more about behind the scenes..

Bash it till it breaks! Then fix the problem. To get that motor to fit... You Flip the lower control arm to the outside of the frame. Put the end link on the screw facing to the outside. Looks a little silly but it CAN fit if you needed it to. Try some 100 mm shocks and it looks like you have a winner! See you on the trails...

Lol 😅😅 this is too much..!! Loving the hill climb action!!!

Yes !! Your back !! Nice video!! You are pulling out some amazing tricks.. thanks for the tutorial .. didnt know these could flip back over.. great show !!!

losi's mega truck is very cool👍👍👍

😮 That sucks !!!! We’re not going anywhere, we want to see what you bring us in the future..!! Thanks for the heads up.. this is a great channel !!

Great video, love all the thrills and spills 😊😂

😂😂😅 you guys have a lot of fun!!! Im too terrified to send and do these type of things like this.. not yet anyway… nice tunes …!! Perfect ..

Wicked sending it through the whoops! Awesome razzing great job 👏

Nice job on the video. Excellent slow motion action. The LMT has always been on my radar. They just performs so well. Other than the body and tires are there any other differences between the Hog or the Grave Digger?

Nice edit. That opening clip is stellar!

Holy crap…! That was hilarious!!!! Not that tree..!!! Lol😂😂😂❤

You got some real nice air time off the monster jump. Very enjoyable to watch all the tandem action. Great job!

Don't forget to check your temps during all that driving full on across the grass.

What kind of truck are you running here?

Had nothing but problems with my big rock.

😂 this is awesome!!! Your getting good man!!! Big blue is a tank. Cant believe the body has no damage.. insane!!!!!

I bought it lol but i really did same color also

I need to do this to one of mine. Great video, thanks for the tips!

Yoooooo ctfu this is all mumbo jumbo but literally the part I was waiting to see I just ordered one great video

My favorite truck. Thanks for showing the ins and outs. Funny you mention the hay paddies. We all get them from time to time. Great job on the video.