Видео

@ThePracticalPatriot echo makes a 24inch bar that's 84 drivers (same as everyone else). I'll see if I can get the info.

@ Dunno what I'd do with that bar on my 590! I have a couple of 461's that run 36" bars if I need some "big guns"....don't use them very much honestly, we don't have so many big trees here where I live. Bought all my saws out of Pawn Shops...don't pay a whole lot for them. The Timberwolves were really cheap, see lots of them since Home Depot sold them for so long locally....Great saws.

@ThePracticalPatriot They are an over looked saw i think. Super easy to fox and they just work.

@@hollerwoodsman 60cc and a magnesium case, lots to like there. I've never paid more than $200 for one and that one was off Marketplace, new in the box. Bought one out of a pawnshop for $50-- guy had bought it and took it back, said it didn't run.....took it home and flushed out the old gas, new gas in, third pull she sputtered a bit, next one it fired and it's started on the second or third pull every time since....

@@raymondutter2616 It really makes a big difference between fill ups.

@@jackmcminn2520 My guess is that smaller holes are cheaper than bigger holes.

Invaluable information ​@@hollerwoodsman

@michaelmckenzie9351 That sucks. I hope you get it.

I've been getting Tacpack for quite a while and this is the weakest Christmas box I've gotten

I just started a few months ago and got the top tier box and I was very disappointed. I got my Battle Box at the same time and I have to admit, Battle Box did much better this month. This was a very weak showing for Tacpack.

@5.56Media I think the muzzle device was the Big ticket item. In my opinion I think they are moving away from the regular boxs, and more into plus box and special boxs.

@@hollerwoodsman Roger that.

@@hollerwoodsman I'm getting the plus boxes and it wasn't much better, A charging handle, end plate/castle nut and an Ambi safety selector switch. My Battle Box did much better this month. I'm hoping that the "Black Friday" box will be something to talk about.

I might try battle box again.

No, I've been trying to do better, though.

@DistinctGamer_ no it still leaks. It's got more issues than that.

@ gotcha. My neighbor has one. Did a lot of research, apparently they just all leak unless you replace all seals or store it on its side. Seems to be an Echo thing

My bigger Echos don't leak. I'm thinking it's the oiling system on the smaller saws.

@@hollerwoodsman Probably right. Will advise my neighbor to store it on its side or empty it out when storing, otherwise, to put a rag under it and call it a day. Thanks!

I'm not for sure. I don't think I have a sawyer squeeze.

@@JensenJonesjr Red beard saws. Is where I got mine

@@JensenJonesjr redbeardsaws.com/products/stihl-12mm-to-echo-590-620p-bar-adapter?_pos=4&_psq=ad&_ss=e&_v=1.0

@ awesome thank u brother

@JensenJonesjr Thank you for watching

@@Airsoftforall i totally agree.

They do have their ups and downs.

Bipod…

@@AnAmericanPatriot1555 Ehh not impressed. Heavier than others I have.

@@ginamccane853 hehe

And it's not Mlock as says in description

@JesseRosas-r5r at my local echo dealer. That is a 620 clutch cover and spikes. The 590 cover is plastic and the spikes go to the studs, so it's a bit different.

Thanks for watching. No issues at all.

I'd say pull it out (14mm, I think) and see if it's junked up or what's going on with it. If the saw is new, it should be under warranty 5 years for "homeowner." I'm not for sure why it's acting up. Unless it's broke off. Keep me posted on what you find.

@hollerwoodsman I figured it out. I had taken out the decompression valve and it looked brand new, zero gunk. So, I took out the spark plug unflooded it, again, and this time I did no choke and it started in one pull. Basically even after unflooding it, the choke would immediately flood it for whatever reason so no choke for the win in this case for me.

Sounds good. I'm glad you're up and going.

@@craighanson2983 I did get a new cap later.

@@brucelewis1017 I didn't have a microphone at that time.

The number of drivers are different. That depends on the bar mostly. As far as I know the shape of the drivers are the same

24/25 27/28 It’s marketing. My “27” inch echo 620 is running a rs chain. Stihls “25” is everybody else’s 24” bar just like Echos “27” is everybody else’s 28” bar. 3/8 chain is highly common. That’s how they control the saws. Just match your 3 numbers. People running 24” + 325 chain had to make them. Dang near impossible to buy. Like oregons new bar naming system names. You can’t find this in a light bar, but this you can have all day and we’ll even throw in a chain! If you try to find the p# in a catalogue or online good luck with that and prepare for a migraine

Thanks, I try and cut out the b.s. and just show what's up.

There's lots of videos on rebuilding saws. For the most part, there are pretty simple. I would love to try out a 500i, but that's more saw than I probably need. Thanks for watching and commenting.

I agree. Next month will probably be better

Sorry about that, I get kinda excited when the camera is going. I used a 7/ 32-bit straight down. That size might work for you but might not. Just make sure that you don't take out too much and get into the rail. It's easier to drill more than to put back. I got a bar that I need to open up I'll try and make a better video on that one soon. Thanks for watching.

Thanks I'm trying

I wasn't able to find any after-market springs. I'm sure these will start squeeking again. I hope that the piece of hose helps limit some extra travel.

You win some you lose some.

Thanks for watching. I'll check out the cat style. Never hurts to have more options.

@hollerwoodsman Do you have a PO box brother?

@2averagenoobs108 I don't at this time. Never really thought that anyone would send me something. Hahaha. I'll work on it and let you know.

@hollerwoodsman sounds good brother. Please let me know, I want you to be safe even tho I just came across your channel. I do like your content alot. Short, simple, and cool.

@2averagenoobs108 Thanks brother. Always great to hear words of encouragement. I appreciate it. Stay safe and I'll talk with you soon.

She's not a Husqvarna fan... maybe a man with a 7310, though.... I'll keep an eye out. Hahaha

Thank you

I run some winter blend when it gets cold. I've been running the bars with no issues with oiling for a bit now. I actually had to turn the oil down some.

Not a good idea, this oil doesn't stick on your chain, so it gets to hot and stretch during time.

I was thinking the chain was an old style. It's might be a green safety chain. I've not seen one before.

Nope it's not a safety chain for sure

Well, I'm at loss then.

Sounds like a good time

It's the normal original one.

That sounds good. But that world is more work, hahahaha.

Thanks I'm trying