Видео

Send me a link and I will send you pictures of mine.

Do not over tighten the inner stock holder screw. There’s no way to repair it. I did strip mine and it was a dead accurate gun, but now I have zip ties holding the stock on and it will go off if you don’t cock if right. I am going to have to buy another gun and destroy this one.

2000 psi Oh boy ?

My GX-CS3-1 died after a couple of days and all I did was top off my impact directly. Amazon took it back and gave me a full refund and the next compressor I bought was the Omega Air Charger and I guess you get what you pay for lol It has been used since 2022 and never misses a beat. You should get one to try out for the channel!!! It can do tanks and all that stuff because it's water cooled but I only use it to top off rifles directly. I don't have any use for tanks or anything because I have my own land that I plink around on so going back to the compressor to refill is not an issue

Bought one, it died on the second use in less than a week of ownership. They offered me parts and then offered me 1/4 refund. I asked multiple times for a full refund and or exchange or upgrade. Nothing. Do not buy if you value reliability and your hard earned money. Still dealing with Vevor support. Would not buy from this company ever again. Very disappointing. Cheap junk.

Bought one, it died on the second use in less than a week of ownership. They offered me parts and then offered me 1/4 refund. I asked multiple times for a full refund and or exchange or upgrade. Nothing. Do not buy if you value reliability and your hard earned money. Still dealing with Vevor support. Would not buy from this company ever again. Very disappointing. Cheap junk.

Martin Patricia Gonzalez Mark Thomas Susan

I've noticed with the FX guns have a higher shot count and a lot more FPE as compared to other air rifles. For example the FX Impact. The impact Mark 3 with a 700 mm Barrel shooting I think it was 32 grain or 34 grain slugs has a shot count of about 70 to 80 shots per fill and the energy/ FPE is very high at 89. I think the Mark 4 has even more FPE at 100. The only other gun that I've seen that has these numbers is the Skout. Do you know of any other guns besides the FX and the Skout that has these numbers?

I've noticed with the FX guns have a higher shot count and a lot more FPE as compared to other air rifles. For example the FX Impact. The impact Mark 3 with a 700 mm Barrel shooting I think it was 32 grain or 34 grain slugs has a shot count of about 70 to 80 shots per fill and the energy/ FPE is very high at 89. I think the Mark 4 has even more FPE at 100. The only other gun that I've seen that has these numbers is the Skout. Do you know of any other guns besides the FX and the Skout that has these numbers?

Hi, do you now what kind of engine is in this Compressor? My was broken and i tory to find new

u need to tune the carborator

What makes them good is they are excellent at CS. They have rebuild kits 50 and 100 hours. The engineer there responded in minutes. (thanks Ollie) Mine came from Pyramid as a used and rebuilt model. It ran 3 hours because it was NOT rebuilt. Two valves had worn out parts, Orings were dinged and it was extremely dirty inside. -great pumps because they are so easy to work on...

Been eyeing this one for awhile now. Were you shooting with the stock power tune?

GOOOD JOB ! :)

Not bad thanks !!

Watch football while it’s running ! Hilarious

Well there you are Dad it's been along time ! It's good to see you !

Nice video, I need to get with you on helping your friend

Thanks for making vids friend. I've dropped my rifle 7 different stupid ways.

I have same vevor I have no pressure any ideas ?

There are at least 4 brands using this motor and compressor design. Only a few use a moisture trap between the first and second stage. It is condensing water and lubricant which causes the bulk of the malfunctions. I noticed your compressor has the same inlet filter (fan side, upper left corner) as my Spiritech. I modified mine to take a low pressure (2 PSI) ultra dry air. I also keep operation temperature under 30°C.

Very nice chassis. I make an extended magazine release for the Savage Mark II that I developed for competition. My Savage sits in a custom chassis that I machined myself although mine doesn’t look as refined as a PDC customs. I sell the magazine release on eBay if you are interested. The release is made from 6061 aluminum and anodized black. No modification to the rifle, it slips on and tightens with a stainless set screw. Greatly aids in mag changes under pressure and time.

Can you please help me what is the fix if I get error E2 ? I get one long beep and then error code E2 ? Thanks.

It looks nice I want one now 😂

Teach me how to change brakes

Hey brother have you heard from sg can’t find his channel anymore

Excellent video and commentary,, and very informative and honest 👍🤠

Had forgot to ask you for you help. I have a cal and 25 cal avenger. With the 22 I can fill it but it leaks air out after about 4-5 days, its empty. With the 25 I can't even fill it. It starts leaking as I try to fill it. I remember you saying you send your guns off to a guy to repair them and I would like to know who that is and if they are reasonable. Both of my guns are out of warranty and I, like yourself don't work on my guns because I reall don't know how to do the repairs. Any help would be appreciated. Thxs

Not trying to rain on your parade, but I recently purchased a 25 cal sidewinder. Don't know if you have follow the promo of this gun, but believe me when I say this gun is everything they say and more, believe me it is. The gun came out of the box accurate, the power is awesome. I thought nothing could top my FX Impact and Crown, but this gun blew me away. It's expensive but to me personally, it is worth it, and with full auto its a lot of fun. Even though I wont be shooting it on full auto unless needed. This gun will push 48 grain slugs @ 82 fpe and thats after I turned the power down. 43 grain slugs at 76 fpe. And @ 55 yrds the slugs are accurate. Wish I knew how to do videos just to show the gun is that and more. The reg came set @ 150 bar and I have it turned down to 130 bar and I'm probably gonna turn the reg down to 110 when I adjust it to shoot pellets. Getting 90 shots on a fill so far and put a little over 300 slug rds thru it so far. I will update you on how it handles pellets but I know I will have to decrease the hammer spring for pellets and maybe the reg again also which would mean more shots with pellets. Just wanted to relay this info since I don't see any more videos from the Brotherhood of Air Gunners. Take it easy and have a great day. By the way I still love my FX Impact and Crown but like I said, this gun is something special IMO !!!

Vevor compressor are junk stay away better yet stay away from all there stuff

Complete vevor junk save your money

Junk save your money burn it you would get more out of it than from the compressor

Junk got sucked in for one compressor junk stay away save your money

Update - This gun is now shooting SK Rifle Match at 1053 fps - 9.3 standard dev

These are on sale now for about 1200. I feel you on making videos tho, shit is a pain in the ass lol

How is the new gun grouping compared to the savage?

Both guns are sweet, but being that there was 4k difference, Yellow jacket! As far as airguns- BRK sniper xr. Have you done any mods to it? Have one myself but my trigger could be improved. Keep the videos rolling!

I have that EXACT same compressor and it broke on me 2 days ago. Had it just a tad over 1 yr. Damn connecting rod broke at the pin to the air piston. The little roller on the end of the rod was ok, however I found it had wollered out the holes in the piston where the connecting rod fits on. Gonna try and see if I can get replacement parts for it. If not, oh well as I have a brand new Yong Heng that I have never opened the box to yet. Trying to figure out a way to Hot Rod a cooling system for it. Put a new higher flowing water pump on order earlier and will have it tomorrow. I've learned that these small compressors struggle a little when filling larger bottle guns.

Hey Dad my wife ended up in the hospital they had to do emergency surgery on her

Sorry i'm late Dad i've got my hands full taking care of a sick wife ! 🤕

Yellow looks good my boy

Love the video man, thanks for the update!

It’s not the bike it’s that the kid can’t kickstart a dirt bike install e start for the kid

Will it fill a 9 liter tank.

The Brocock snipers even the unregulated versions are 250 bar fill in the US versions. They are 200 bar fill in the sub 12 fpe configuration in the UK. The gauge has pressure in the red from 200 to 250 bar so some people think that the FAC or US models has the 200 bar limit.

Nice looking setup KB

I got a db10 Tao Tao 50 cc and I got it when I was 7 and I’m 12 now so I have it for about 5 to6 years now

The bottle is wrong. I have the same pump , I run it for a max of 12 minutes then run the fans wait 10 minutes then kick it on again. It’s been a wonderful addition going on over a year old .

The bumbe bee lives !!!

Aa the bunble bee ! 👍