Видео

Hello fan its connected via motherboard argb 5v header and use ASRock Polychrome Software, you need motherboard with argb 5v header.

You can check the straight line of ms below the fps for smoothness when gaming, probably the recording of the video cause its lock at 60fps or compression codec of RUclips do this..

league of legends stutters if you get more than 2x fps of your monitors refresh rate, thats game engine related issue, characters starts teleporting

@@ufukbakan4741 Yep thats true, i made this settings just for testing the max fps

And can you make a vid about it

@bkmogalesoccergoal Hello Psu going at the bottom of the pc case like all regular case, its the cage you see in the Video, below of the GPU

Hello yes its good, Sam Tahmid - Nightfall

Hello use bios to make all this settings not Ryzen master, as you mentioned you see 3700Mhz in all cores when you run CB23 that's mean probably core boost its disabled on bios check if enabled and check and you temperature when run CB 23, what's the model of you Board? update to the lasted bios and check again.

@@techover1542 Hello, my motherboard is Aorus b550 MasteR, the most interesting thing is that with your values ​​everything works well, when tested in Aida the processor accelerates to 4600 and at its peak 5100, 4950, but when running Cinebench 23 it gives values ​​only 3200, and in cpz the same thing =(.

@@L1stopaD B550 master its very good board but Gigabyte boards had some issue with Boost override setting and they had to remove this setting in some version of bios cause was bugged , so try use the last Bios for your board and try to set boost override to 100 and check if issue persist.

its static you cant turn it off or change color but its cool.

They are FRGB 'fixed' , they can't be turned off or slowed. Just on all the time with lights. Nice case though !

Hello cable management its doable but need a lot of work , for the setup you want to build i think this case its not enough,,

@techover1542 even if I have a full modular psu?

​@@yungm00n24 its not about cable management, this case don't have a lot of space for good airflow also the structure of the case its not the best..

Hello its Gigabyte GeForce GTX 1660 Super 6GB GDDR6 OC with L=225.65mm, this case Supports GPU up to 286mm (without front radiator)

@@techover1542 thx

Or is it powered by molex

@@user-wz5ee8tu7p yep all fan conected each other with molex and you just need 1 molex from your psu to power on.

@@techover1542 ahhh. Full speed fans then. Are they loud?

@@user-wz5ee8tu7p its not too loud, its sound like common 120mm fan at 1000 - 1200rpm ..

@ definitely still a turn off 😭

Hello what's the part model of your memory kit? if its 3200 its not possible to increase speed without change at least the timings .

Hello no, only memory Xmp enabled in bios.

Hello all Argb is connected into Motherboard 5volt Argb headers i have used adapters to convert lianli into 5volt common Argb connector and use Msi Mystic light and the effect is the MIxer.

Hello this case don't come with riser cable you need to buy 1, the airflow its not very good with this setup at least at summer time, i prefer you to use it with itx Air Cooler like NH-L9a-AM5/am4 and 2 exhaust fan at the top also doesn't support any fan at the bottom but you can add 1 80mm or 90mm fan only, also doesn't support ATX Psu cause in official site have misleading information.

@@techover1542 thx alot you rescued me bro

hello no, its static RGB

Hello not riser cable included!

Yep its cool , airflow its decent not the best but need a lot of work in cable management.

Hello that Pc Case dont have the best airflow so my recommendation for GPU with max power 170W, like Rtx 3060 12GB or RTX 4060 8GB will be Good

Will improve the fps 7-15 % in some games and also in some will be more smooth without stutters

Hello i cant cause this Pc case dont have it anymore but had very good airflow with AIO 360 in the front on cyberpunk i test it had 65c in cpu and 73 in Gpu at 2k resolution with 28c ambient.

ok perfect I'll buy a 240 on the top bcs i play in fhd​@@techover1542

No, only 2 in the front!

Hello in cyberpunk at 1440p with path tracing Fps will be very low with just Ray tracing and dllss balance you will do like 40-45 fps, yes of course with Ryzern 9 3900X on Warzone you will not have any problem for streaming Cpu its plenty enough, i prefer you to get 5900x if you can find it at good price but and 3900X its plenty enough for you Gpu .

@@techover1542 thanks I thought so.

Hello 5900X have max power consumption 145W if not use PBO, so cooler its enough in my case on Cinebench 23 had 80c max temp in 2-3 runs but if you have Pc case with very bad airflow probably temps will increase alot .

@@techover1542okay just wanted to make sure. My cpu doesn’t go above like 78c but my fan speed is always at 100%

@@PossumBallz-q5e 5900X have max temp was 95c now is 90c as Amd officials said, you can adjust fan speed rpm from bios or from software of your board manufacture like (Armoury crate, MSI Center....)

@@techover1542 thanks man i appreciate it!

Hello that Hdd cage its not removable, in my case i have push it down with force its easy, for the fit of the Gpu.

Hello in manual (support up to 2 X SSD & 2X HDD Combo.) all mount in HDD driver cage.

cant cause i have sold already the kit but you can see the timings and sub on the zentiming in video.

check in description.

Hello im not sure about this Pc case cause don't have it now but in the most case rgb lights going off when push rgb button for 5-6 sec continuous.

Hello for mid range Pc Build its very good ,you can also add more fan in the front of the case for better results.

@@techover1542 Is it possible to mount an AIO there too?

@@annaabeyratna6345 Probably you can add 240mm radiator in front only if you not have long gpu more than 270mm .

This pc build its enough for esport gaming at 1080p with low/mid settings .

remove the front panel carefully and then you can screw it.

Hello that the specs Chassis Cooling System -Front Support 2 x 12cm -Rear Support 1 x 80cm Exhaust Fan (Fans Not Included)

Hello that case coming with red fan and red color in power button only and cant change it, its many Versions of these Pc case with different colors fan and also version with RGB .

Remove the smal bracket and covers in the back of the pc case and then install the dedicated gpu and screw up.

Im not remove it just i push it down its very easy,this metal from hdd cage its very thin.

?

Hello im not use any Lian li controller here im use only Lian li ARGB Cable Kit , im not sure if you can with this kit to connect the lian li Hub SLV2 i don't think so, but you can check what cables this kit include in official site and if any compatible .

Hello, yes you can fit MSI Radeon rx 6500 xt mech it is very small GPU its only 170mm easily fit.

Release Date Sep 19th, 2014 , its awesome performance for 10 year old card and still capable on dx12 titles.

I tested for 1 hour in blender and Large FFTs at 4000mhz CL19 1.4v FCLK 1:1 2000Mhz Hynix DJR Edit: 4400cl19 1.5v 1:1 2200mhz Stable at VRAM Stress in OCCT + Large FFTS combined (3h) And 3 Cycles TM5 Extreme by Ant777

Hello cause with -20 negative and above some cores wasn't stable, you can try set different magnitude each core but need a lot of time of tests for the best possible.

@@techover1542 yes that's what I've thought but you told to do -30 so I've did it plus OC uncore and auto core voltage. Seems its stable at Cinebench R23. I'll keep it like that. I won't do gaming with it, it's only for office use but to save power I've undervolted it.