![neuromangler](/img/default-banner.jpg)
- Видео 1 486
- Просмотров 2 819 763
neuromangler
США
Добавлен 3 янв 2014
Where I share a wide range of ideas, tips and techniques on whatever I happen to be doing that might be useful to others.
The purple berry bush I feature in the header of my channel is called Callicarpa Americana, the American beautyberry and is a native shrub of Southern United States, a place in which I feel so blessed to live. American beautyberries produce large clusters of purple berries that wildlife enjoy eating
The purple berry bush I feature in the header of my channel is called Callicarpa Americana, the American beautyberry and is a native shrub of Southern United States, a place in which I feel so blessed to live. American beautyberries produce large clusters of purple berries that wildlife enjoy eating
Cylinder Head Valve test prior to lapping
I devised a test of the sealing capability of the valves using a vacuum pump with gauge and timer to measure how long the valve can hold vacuum. Timer starts when the ball valve closes and the timer is stopped when vacuum drops to 10 inches. I found a wide range sealing performance from hours down to less than a second. The worst performing valves were found in the cylinder that was reworked by a machine shop. I decided I will no longer be using that machine shop for anything in the future. I will lap all the valves myself and repeat this test. I did lap one valve and brought it up to a very high level of sealing performance, I will release a video of this soon with visual comparisons of ...
Просмотров: 34
Видео
Tinting Headlights YELLOW
Просмотров 296 часов назад
I have always wanted to try Yellow tinted headlamps and recently I found a kit sold by Amazon for only $ 6.99 that allows you to easily convert normally clear headlights to Yellow tinted lights
Assembling the Miracle Grow Composter
Просмотров 4713 часов назад
I assemble the Composter and refer to the on line instructions as little as possible because it is very annoying.....there are countless slides that you must scroll in order to glean information. I would prefer just to see a pictorial diagram showing the parts in location and maybe a few close up views on some key issues that you may encounter during assembly
Gorilla Tape cures Mercedes water leak
Просмотров 28День назад
I find water leaks into the floor from the bottom of the windshield at the cowl seal so I use this super sticky water proof tape to seal out the water
Mercedes High-Tech water leak Detection by Design ?
Просмотров 17День назад
I notice the CAN bus connections on my Mercedes 2014 C25o are located in the floor and are very quick to provide warning of water pooling in the floor by an onslaught of warning lamps and system failures. I am convinced that there must be specialized and highly talented groups of designers, materials engineering and accountants that design failures into the car to encourage new car sales and bo...
Concrete Wet Saw, 16 inch Diamond Blade
Просмотров 6814 дней назад
Concrete Wet Saw, 16 inch Diamond Blade
US extreme power 16 inch Diamond blade wet saw
Просмотров 10414 дней назад
US extreme power 16 inch Diamond blade wet saw
Cutting opening in Brick wall for AC using a Wet Saw with Diamond blade
Просмотров 5614 дней назад
Cutting opening in Brick wall for AC using a Wet Saw with Diamond blade
Ambient Air Temperature Sensor tested
Просмотров 7321 день назад
Ambient Air Temperature Sensor tested
Train Ride at Durham, NC Museum of Life and Science
Просмотров 20428 дней назад
Train Ride at Durham, NC Museum of Life and Science
Water Jet Cutting and MiG welding to fabricate a valve bracket
Просмотров 121Месяц назад
Water Jet Cutting and MiG welding to fabricate a valve bracket
Broken Guitar neck repaired to playable, not pretty
Просмотров 16Месяц назад
Broken Guitar neck repaired to playable, not pretty
000-120 Neural Drive screw captivated using a ferrule
Просмотров 38Месяц назад
000-120 Neural Drive screw captivated using a ferrule
1 Gallon Storage bag, Harris Teeter vs Wegmans
Просмотров 3Месяц назад
1 Gallon Storage bag, Harris Teeter vs Wegmans
Repairing a PC board, reading the silkscreen for clues
Просмотров 372 месяца назад
Repairing a PC board, reading the silkscreen for clues
Prepping Fiber Optic connectors for Neural Implant use in moveable electrodes
Просмотров 532 месяца назад
Prepping Fiber Optic connectors for Neural Implant use in moveable electrodes
Chevy V8 block off plates for testing cylinder head valves
Просмотров 6082 месяца назад
Chevy V8 block off plates for testing cylinder head valves
Cylinder head valve sealing tested with water
Просмотров 882 месяца назад
Cylinder head valve sealing tested with water
Chevy V8 knock sensor testing shows about .25 volts AC output
Просмотров 1982 месяца назад
Chevy V8 knock sensor testing shows about .25 volts AC output
Melling M155 oil pump installation in a Chevy V8 5.7 L
Просмотров 162 месяца назад
Melling M155 oil pump installation in a Chevy V8 5.7 L
looks good would have went with a different color, but thats me,, looks good
Used to run this on some of my old cars. It works greats got pulled over a lot for them though
white or amber headlights are legal, you can still get pulled over just because...if they are in a mood to see if they can jack you up. Lately, it will take a lot to get pulled over based on what I see going on everyday
My first time trying to fix a robot and your video was invaluable
I swapped the lock cylinder, and my problem now is that when i first unlock the door, sometimes the first pull of the handle doesn't work, once it works there's no issue, but always an issue on first attempt after unlocking... Suggestions?
Uhh seems like you should have bought more than one tarp
Grab some gloves boys. We're spreading some mulch!😂😂😂
Friend, you are an absolute legend!!! Thanks, just fixed my caddy’s radio. Finally i can freely decide what to hear where to go and how everything sounds:)
Mine certainly does not disassemble like that, it has a threaded collar on the feed tube that you need to unscrew twice, lower part of the feed type and upper as well. After doing that, the Barrell just remains where it is. So what gives? Tell me where I'm going wrong, please.
How can i make IDE hdd motor spin continously?
Do you make them and sell them?
I do not sell things, just make them
How did you get the heating element on the replacement cover
it was in the foam, not the cover
We just bought this, as there is a discount on it at Costco. We haven't broken it out of the box, but i would have likely found out about the punch point the hard way. Thanks for this heads up!
Same issues here .. what tool was that to crimp the bnc parts m? Excellent video.
I order lce cube maker Amazon start at 45 to 120 whirlpool website is 100 dollrs what is deferent quality or what 😊
I have same brand my ice maker doesn’t fall down ice when wants pour water again water goes down
a really helpful video - thankyou!
Could it be that your water valve solenoid is going bad? Not closing all the way and causing the water to drip and freeze in there, maybe?
I can switch the ice maker off and it does not have water dripping after many days so that tells me that the solenoid valve is holding pressure properly
Thanks great job on the Video 💯💯💯💯
Thanks! We have to remove the radiator and in order to do that the battery base has to come out and we were using that to hold the stick to hold it open. So, this will help a lot. Thank you.
Vielen Dank, it saved me 2000 EUR
Just what I needed to learn. Thank you!
Thank you
Do I need goggles when I used the bolt cutter?
Works like a charm. Mine had a bunch of sticky junk on the bottom of the screen. I don't know if a glue in the original screen melted or someone spilled a sugary drink all over the screen at one point. The original touch screen stopped working when it was hot. At night for a few minutes it worked until the screen light itself heated it up. Now it works like new.
Muy buen video. A veces no cierra bien la tapa de aluminio. El flex de la pantalla anterior, lo dejas o lo cortas? Desde ya muchas gracias
I just checked the link and it doesn't work anymore. And in my case i would probably have to remove the old digitizer, because mine have air bubbles behind it
German engineering 😂😂😂
man I havent seen never dull since I was in the navy. I just checked on Amazon, never done that for some reason, 12 bucks for a can. We used it to polish brass everything.
What gauge wire did you use? Multi-strand or solid? Low voltage thermostat wire, maybe?
does not matter at all about the wire as long as it is insulated
Hi. Please where exacty did You put in the grease. Can You circle the area for me ? Thanks 👍👍
loosen the fasteners a bit a pry the joint open. Use a needle to pump grease into the joint, rotate the shaft 45 degrees and repeat the process until you are back where you started. then tighten the fasteners and enjoy success
Having the same problem with my 2002 Nissan pathfinder LE, lights work on presets and words, just will not turn on, I wonder if this model has the same relay? And where?
probably the exact same
Thanks very helpful!!!
Nice👍
GFCI Ground Fault Circuit Interrupt
Thanks...I tend to abbreviate even abbreviations
You rock. I need to figure out how to zoom in on the toggle to understand how it works.
Did it leak lol I need to know buddy he'll with an oil cooler all they do it's leak it's the stupidest thing I've saw chevy do or make or what ever plenty of truck pulled shit behind them with out an oil cooler for the engine oil
Dear Sir, first of all, thank you so much for sharing this video. We have a Seat Alhambra 7N from 2016, we had the same issues with the touchscreen. We all know what the price is for a new system 😢 So in my case I order the new touch and some tools from Amazon for the dashboard. Today I fixed my media system plus . It's working like a new one and that for the price about 25 Euro. I say it again ,thank you so much Sir. Best regards from Germany
That almond looks really good brother
Great tuturial I kept having to come back to see how you did certain things like the clips, and thanks for the 'clip releases easily' comment as this was very helpful. I did have to open mine back up and loosen a few screws and make sure the screen had no pressure as when I first put it in there were pressure marks in all 4 corners where it was tight.
Vielen Dank für das Video. Habe das Navi in einem Seat Alhambra reparieren können. Viel Geld gespart damit 💪🏻
Thanks buddy , it worked ❤❤
Obrigado por compartilhar
Thank you so much. I just saw this on amazon and wanted to buy it but had no idea how it would work. I was elated to find that there was a video about it under your channel. CHeers!
Thank you for the detailed explanation. Really useful. Although I unfortunately left a speck of dust between the new and old touch screens, it is fixed and works again after more than 1 year broken. 🎉
Exactly what I needed! Thank you!
Vielen Dank für das Video. Habe ich das richtig gesehen und der neue Touchscreen wurde einfach auf den alten gelegt ?✌️
Yes, the new digitizer screen was placed over the existing screen
@@neuromanglers heute Vormittag habe ich dem Touchscreen getauscht . Danke für das Video 👍
harbor freight dolly with cinderblocks, great idea! how did the wheels hold up for firing? did they melt at all?
No issues with the setup at all
Thanks very much!!! Your tutorial was very helpful to save my 2017 Seat Alhambra. The radio works 100% again. I'm happy. Greetings from Baltic Sea, Germany.
I get the same results without the expense and the added pollution of the bleach. I use 5 gal buckets filled with about a third of water and then using a drill with a paint mixer sized for a 5 gallon bucket and a couple of minutes a day within 3 to 4 days I have a bucket full of oatmeal. Throw an old bath towel on the ground, pour the oatmeal on it and in a few days, ready for the garbage, Carbon capture and security at it's best.
Is there a demo video?