Видео

thank you for uploading this, made the danger apparent, yet provided information needed to accomplish this safely. i appreciate it!

My 120 30 amp inverter plug has two cables and a ground. Those two cables provides 60+ v. How do I connect it to my. Home panel?

Thanks for sharing. I'm working on a similar project, but I'm stuck on a step and can't figure out how you solved it! Could you tell me the part that allows you to connect the alternator to the shaft? It's very visible at the 6th second of the video.

All that would concern me is weather protection for your circuitry. But I'm glad to see people building such. 'Cause my day is comin'.

Yeah nice! I watched my Landlord move a Refrigerator up three flights of Stairs to a 3rd Floor Apt. and with my hip I was like no way I want to be doing that after retirement. But might want more than Stiltz had to offer.

⚡️⚡️***WARNING!!!****⚡️⚡️ ⚡️☠️🔥☠️⚡️☠️🔥☠️⚡️ First and for most this is very dangerous!!!! As a high lineman this was my greatest fear!! Secondly check with your service provider before connecting one house to another, it could be considered “theft of utilities.” Thirdly… make sure you are using heavy enough gage (awg) wire, minimum of at least 12/3 wire a 20 amp circuit breaker. Forth… ONLY connect neutral and ground together in the primary panel, secondary panels the ground and neutral must be separated.

I'd add a rolled-up rope ladder at the side for power failure or jamming so you can get down safely if your at home alone or a ladder mounted beside it that you can hop over to

You can’t fix stupid

Please, if you're reading this, install a manual transfer switch or an interlock!

What battery set up would you reccomend for a 50cc pit bike it’s for my four year old so it doesn’t need to be super fast.

Great Job ! “ I got a question if you would be so kind and say I have a 5KVA solar inverter what’s you’re thoughts on 230v the L1 - is Hot 115v+ & the Neutral is Hot 115+ and ground is Ground “ my thoughts are off the inverter the L1 ~ 115v to 1 Phase in main panel & the Neutral off the inverter which is Hot 115+ to the other side of the main panel ! Making the box One Phase in an Electrical Emergency grid down “ the inverter is Hybrid “ but I would still shut off the 2 mains to keep less electrical confusion from losing split Phase to 1 Phase to Back to Split Phase ! Worse case scenario if I was sleeping the Hybrid inverter would kick electricity on if lost and would stop the whole main panel as One Phase when electricity came back on , “ Are “ there any issues going 1 Phase to Split Phase in you’re main panel ? If you would be so kind to answer ?

I KNOW I KNOW IS 2 YEARS OLD , BUT IF YOU LOOK THROUGH THIS ,THANK YOU FOR THE IDEA

ONE WAY TO KNOW WITCH WAY IT SHOULD TURN ,WEATHER CLOCK WISE OR C CLOCKWISE IS TO LOOK AT THE FAN ,THE FAN IS NEVER WRONG

Ive backfeed with my 120v inverter. But the only way that it works is, with one hot and the neutral wire. It doesn't work when i hook up the ground wire. Im thinking the reason is because my panel is bonded already.

Love this field a lift

For a complete offgrid application. My 240v generator is hooked to the 100amp main breaker . My solar is hooked to a 30amp single poll breaker on Side B . I have a interlock swith in place .so i can't back feed to either power source. I have not done this jumper yet . But can I take a double pole 30 amp breaker ,put a jumper wire . And safely feed both A&B ??? From 30Amp solar enverter . And does jumper breaker need turned off when 240v genorater feed box ???

can you install one for me?

Fantastic job - I’m using a 5KVA 230v 93A solar inverter 48v on this 230 V one phase inverter L one is 115 V the neutral is 115 V in ground is ground so technically you have two hotlines coming out of this one Inverta yes it’s one phase but it’s at 115 V and what I can figure out 93 A divided by two is 45.5A Per phase and then the grid down situation having half your amperage is better than having no amperage at all thanks for your video clip electricity they try to make it too complicated and you write it down right to the balls to the wall working !

Very good job

Just add a transfer switch for safety....anyway my question is...since as you said only as emergency 😁...what if instead of jumping the single pole 20Amp breakers...you used 2 outputs of the inverter with 2 extension cords?..are the 2 outputs diferente coming out of the inverter?. Thanks

What does MWBC mean in regards to an electrical panel box

What does MWBC mean regarding a breaker box

Great job

I cringed when I saw this...

Perfect! Just built a solar generator and was wondering how I could power both legs of my panel with 120 volt. Pretty simple. Your video was the first to come up. Thanks for sharing. 👍🏻

Thanks

If you’re inverters output was 220+v you could get a Siemens MTO 100A Transformer 230v in One Phase & out Two 115v dual Phase what I’ve read ! To keep any 220v lines ! Think about it I am Not An electrician !

thanks, don't forget to do marinisation of electronic components and clear the motor once a while to remove the salt, also you can make a sealed big chamber and cool the air inside with a diy sea water pump cooler

This lift cast how many rupees 500 kgs 35 fits high

How to kill a lineman 101 right here ...

I was thinking the exact same thing. Put two pole breaker and jumper wire between two poles to achieve 120 on booth bars. As long as your not running 240v appliances I think your Amps will shoot up if you do

IT IS RECKLESS AND DANGEROUS !!!! (I am going to do the same thing in an emergency.)

Your video ain't explaining shit it's more confusing than anything ,what a waste of time

This makes me jealous😂 We use 230v out here but our local governments care a lot about safety, a little too much. I can't access anything without removing almost the entire structure. It's made so you only flip the circuit breaker when needed and that most will just hire an electrician to not have to deal with it.

How to make it out of phase , I got a SIEMENS MTO100A Transformer 220v in & 2 100v out ! Have not hocked up yet , great job !

Do I have to have a esc controller?

I have a 4 storey building. Would it be possible to build something like this?

Curious what the siding you used on the basket is. (the white siding)

That’s kind of what I was looking for. I’m try to connect the inverter into the panel I have solar panels connected proper way and then the inverter wanna connect it to the panel we have no light. New track no light for 3 months

Just the advice I was looking for. That's for posting!

Can you please show to connect those wire and what i need to buy. I had ruined three alternators already. I don’t know to connected them and i had burn out several esc

I have so many questions because I have the same alternator but I don't understand what your saying so I guess for the dummy in the back of the room being myself can you tell me what wires I'm using out of the 6 wires

Do the 220v certainbreakers break if you forget to switch them off?

horribly unsafe

Hello, i have an alternator very similar to yours with 6 wires, but i cant figure out how to connect the wires to wire it to an esc, because physically there are 3 groups of 2 wires, BUT 2 pairs of 3 wires each that have continuity with eachother. Totally throws me off. I dont care if its delta or y for now just trying to figure out which end is which.

Question! When your ground and neutral are tied wouldn't you burn up a non sine wave inverter? A non sine wave puts 60v through hot and neutral, and with the ground tied to neutral it would short.

I have an inverter 5KVA 230v pure sine wave inverter I was planning to do what you did thank you , I was going to back feed through a 100A Double Pole Breaker and use a transformer Seimans MT0100A 220-240v in & 110-120v out ! Only for when the grid is down ! What do you think ?

оцените мой вариант лодочного электромотора ruclips.net/video/Dz6mrVQBryQ/видео.html&ab_channel=OlSem

That's very good idea. I like that. I need it for my own things to moving out of the house soon.