Видео

tune helps make the extra little hp avail work. stock ecu it will run fine and it will not through a cel for cam pos sensor.

sorry for not replying sooner. yes car had no tune just headers and a 260, ran well no cel

@@jamesapgar4916 Boring really make that much of a difference? I have a neuspeed supercharged jetta and yours seems like it's on crack 7-13psi

@@imdirazi it’s a combination of boaring- quality head work p&p this head had +.5 oversized valves, good gear ratio selection for the trans and a nice light weight wheels and tire combo amongst other things. And it was running 16-20psi with the 2.2 pulleyboys pulleys.

There are 2 versions of a 2015 Hyundai Genesis the regular sedan with a 3.8l v6 and the rspec version which this is that has a 5.0 v8 in it. This is a 5.0 rspec in the video, sorry your confused but you can troll elsewear as this is in fact a 5.0 🤓

It survived the fall luckily

It’s a Black Forest industries 8v valve cover

Yeah I just swapped it in from a katcam 273 turbo cam, swapped from a usrt short runner to a usrt long runner. This winter I’m going to a +2 big valve head and 630cc injectors. I’m out of fuel on the Bosch 440cc injectors right now at 23psi.

@@jamesapgar4916 my engine has almost everything done to it currently 94 oil squirter block 20 over Wesco pistons k1 rods crank has been balanced crank is pined also have billet crank gear the head has been massively ported 276 wide lobe big valves arp had studs main studs rod bolts crank bolt I plan on running 30-35 psi with my Garrett gtx3071r gen2 on e85

@@NorthernPerformanceGroup I’m currently running 83.5 je pistons with Rifle drilled H beam rods in a obd1 aba block that was fully balanced, Head that is on the car is a obd1 race ported head but going to freshly rebuilt obd1 German head with +2 valves this winter and larger 630cc injectors I run 106-110oct race fuel. Your going to need 1000cc + sized injectors for 35 psi on e85. Was running 30psi a few years ago on pump gas but haven’t turned it up that high yet cause the 440s are out of steam currently. What management/ecu are you currently running? My car is set up On lugtronic

@@NorthernPerformanceGroup also I’m not on stock intake manifold Turbo is a pte 5558 gen 2 antisurge compressor set up

@@jamesapgar4916 I’m going to run 1200 cc injectors and -8an fuel line I’m shooting for 500whp ecu I still haven’t decided electrical is my weak point haven’t decided fully

83.5 je pistons pauter rods and tdi crank back than.

this one was a home build unit. ported factory lower manifold

Just switched to a pte 5557 this video is my old turbo. Which was a 5438 pte

420 to the crank not wheel. more or less 330-50 whp lol

@@thevally6127 im at 410whp rn, im trying to get up to 650whp once my supercharger kit is installed.

Yea u prob don't own one.

@@daily5.0r-spec97 just got my 2015 5.0 what performance mods are out there? Having a hard time finding anything🤦🏽‍♂️

@@one_slow5.05 he’s lying like shit….there are no mods for this car…ive had one 6 months now.

THIS MOTOR IS SET UP OBD1 SO ITS A OBD1 ABA THROTTLE BODY. OEM VW PARTS NOTHING SPECIAL

5.0

@@booniedavillier504 yea i took that personal when he said it was a r-spec lol P.S. i own the real R-spec, sedan & the coupe.

@@dame305_ what the fuck are you even talking about? Honestly: what the fuck are you talking about?

@@dame305_ reading your comments made me feel stupid now you should apologize to me

Lol no you not. ​@dame305_

Not at all I’m like the happiest guy in the world.

Pablosway that's cool man I have been working on a lot of other stuff recently. But I should have some new stuff. Im in the north east USA. 👍

did you hold on to this build?

Bobby Shreve it's a oem alternator just polished

James Apgar damn I have a 350amp on mine and can't get a belt or anything trying to avoid having a custom bracket built

Bobby why are you running such high current alternator? Stereo or something

James Apgar precisely I had a couple large amps and stuff in it for a ehile

Mugshot Marley stock valve springs and retainers

Thanks!

No it's a autotech 260 came out of my boosted 8v when I went to a larger cam 👍

James Apgar I Have never heard a 260 sound like that it sounds like a 270

2595cjp mostly stock motor. no cat 4-1 obx header +4 on cam gear

Duration isn't the main cause of that cam loping sound. It's all about how much valve overlap the cam causes which is determined by a special equation involving duration and lsa/lc. You can have high duration with no lope if ya wanted to. IIRC the stock 8v hydro cam has about -10* overlap. If I'm not mistaken, the 260 has 0* overlap, which is about the limit you wanna run on the mk4 (drive by wire) 2.0 8v engines. Any more overlap, you'll need an ecu tune to raise the idle.

Yeah I do all my own work. Timing is the same as a normal cam just have to install it at top dead center. Make sure crank intermiadiate shaft and cam are all at tdc and your good.

ooo okay sweet thanks well I have done all that so far now its just a matter of putting all the stuff back together and see if it starts

Did you have to use a head spacer for it and get a longer timing chain?

@@charleswiley87 the engine is naturally aspirated and the crank to cam center distance didn't change so the timing belt did not need to be lengthened.

Thank you makes me laugh when I watch it. The car is long gone but the motor lives on in a mk2