Видео

Hey it really was a nice truck with plenty of ways to mod it. Sadly I had to relocate last year and due to the amount of luggage my family and I had I just couldn't bring my RCs with me. Hence the reason for no new content in a long time

@@mace2gorc872 That's kind of sad. We really get connected to our cars. Hopefully you can restart your collection with some of the new products out there. The Losi Lasernut has been something I have really wanted but I just cant see spending that much money right now so my next purchase will probably be a crawler and the Everest 10 just seems like a logical choice. It would be my first crawler ever so I'm excited about that. Hopefully you will get your channel going strong again. Best of luck.

Thank you for your comment. It's 1/10 scale.

@@mace2gorc872 i love your gtr its more bigger then mine

@@mace2gorc872 i have 1/16

@@mace2gorc872 where did u get the 1/10 scale from ???

i wanna buy it

Thanks.

Upgrade servo, its part of the fun 🤷‍♂️

I was surprised by the quality and performance of the gen 7 pro. Good stuff.

They are so fun when done like this, I put a regular brushed 21t Traxxas crawler motor in mine and it’s WAY to much motor for it lol does flips from a stand still… it’s is so capable after about 200$ of mods it isn’t even fair to all the expensive “scale crawlers”

Indeed.

For me it ran around US $150. I just checked on AliExpress and it's over US $300(depending on the electronics) for RTR. I know different sites may have it for under $300, but even if they go for around $250 that's a big save either way. Mind you that I didn't go for the top quality electronics such as hobbywing and other such brands. Also. I already had transmitters, extra receivers, batteries I used. so that also saved me $$ Prices may have been different too at the time I bought the kit and the electronics. But I feel you would still save around $50 if you had to buy every single thing. For me I wanted the joy that came with building/putting it altogether and learning from the experience. I got the kit and the electronics from Taobao as their site had them for the lowest cost compared to others I checked. And the shipping was reasonable as I don't live far from China.

I was really impressed with this car. I did hear tho from a guy who, after watching his videos, said the diffs are a weak point for this specific car. I Haven't had such experience yet. The spur is plastic, which I only recently upgraded to a steel one, but the plastic was still fine when I swapped it for the steel. The body is trash if you don't reinforce it. I haven't broken any parts, mind you I'm not an extreme basher I just do the average stuff. It backflips well too. It has done plenty of cartwheels on crashes and no breaks.

@@mace2gorc872 thanks man, much appreciate the response, i might pick one up and build it myself, like you did😉👍🏼💯

My pockets aren't that deep bro 😂. I wish they were. Such a good RC. I'm jealous of those who have one.

I like the cobra too. It has either a diff or motor problem right now. That's why I haven't posted any vids of it lately. If it's a motor problem then it would be the result of too many crashes and rolls that I think the vibrations sent shocks to the motor and knocked it out. Gonna look into it more and see if I need to order a new motor.

It came as a clear body and I painted it those colors. I got the preassembled kit version of this truggy.

According to it's manual it says it is set to 50% it does feel like 50 when I use it and so far I haven't seen any serious wear on the gears. The spur gear in the center is plastic(I already bought a steel one), but the plastic is holding up nicely considering all the cartwheels and bad landing this truggy has suffered. So far I've only broken the bottom part that the cap screws on to for the shock body and certain areas of the truggy's body. Nothing else. I'm impressed.

@@mace2gorc872 nice! I have bought the hsp 94111 kit and with that esc I broken the front diff and all dogbones!😕 and when i checked with programming card the braking was at 100%. Weird. Cheers

I haven't been able to get out lately as work has been something else and really has taken up most of my time and makes me tired. Between that and family it's been a little challenging. I plan to do a review and final thoughts video in the near future.

Thanks for your comment and apology for such a late reply. I actually forgot about it due to work. As of this video I ended up installing the aluminium ones and haven't had an issue with them or the rods that connect to them. What I ended up breaking afterwards(twice) was the center driveshaft pin on the front head/end that goes into the drivecup. I'm still exactly sure why that broke on 2 separate shafts. I thought it was a bit of bad luck on the replacement one as after just one hour of using the truck it broke. Then I saw the front center drive cup was damaged and guessed maybe that's the reason(it wasn't broke/but there was alot of wear on it. So I swapped that out and so far have broken the pin in the new replacement after 2 bash sessions now.

If you can find this truck for sale/less than the MSRP(which I did, for about $35US) less, then it's a good truck to have. I'm owing my experience to bad luck. So if you find it for cheaper, it doesn't hurt to then just get the aluminum hubs.

@@mace2gorc872 lol its alright. Just wanted to update that I got the truck, and I've been pretty happy about it. Haven't broke a single part yet, but I guess that's because I have no place to bash this thing other than driving it on my neighborhood roads and do very long wheelies with it. Got mine for about $240 USD

thanks for watching

this truck is alot of fun. its mad on 3s lipo. 2s is plenty so I think that's where I will stay for now. thanks fro watching

I hear ya loud and clear, I will be getting some up in the future as really its only on Sundays that I have the time to go out mess with my RCs. some unboxing and other ones will come. Check out the trailer I just dropped yesterday for a future vid. Have a good day

When I broke it I was not using 3s lipo. But the esc can take a 3s lipo and I have used it in there before. Pops wheelies much easier on 3s.

Too fast on 3s yes!! I've changed the wheels with bangood wheels!! Much softer and lighter and more grip!! They absorb very well bad Landings!also looks great!! 1/10 wheels for monster trucks 4 pieces about 25-28€!

@@nikostyson3255 what wheels did you get. Do you have a link? Yeah it's fast on 3s, easy to spinout or flip in my opinion. 2s is plenty. This truck is fun tho.

@@mace2gorc872 for some reazon it dont let me write the link!! so if ypu write in bangood search 'wheels 1/10' you will see the first big 1/10 scale wheels

I've had for a month already. I don't consider my bashing hard as I have seen others throw much more at their RCs. I would say mines is medium as I don't do really big jumps or such. When the first CVD broke I though it was because I tighten the wheel nuts too much and that this caused extra pressure or something. Because I tightened both rear wheels and those are the ones that broke. But this is just speculation I don't know why though the steering hubs broke. The same side too. Maybe I'm just unlucky and got weak parts with this one.

@@mace2gorc872 where do u get ur PARTS? also any mods? u did?

@@cadworxx I got the trough through asiatees website. Seems I got the last one as they don't have this truck listed anymore. I get my parts through "Taobao" website. I haven't don't any modifications really. Only upgraded some parts to aluminium.

That's a good question. I had a drift car in the past and the setup was slightly different. So I'm not sure. Maybe a Google search might provide the answer. I also sold this tamiya rc.

@@mace2gorc872 I will search it up, thanks. And I know I’m 4 years late 😂

Yeah, I'm glad I bought it. On 2s it's a blast. Too bad that the steering hubs seems to be a weak point.