- Видео 119
- Просмотров 101 726
Tyler Stacy
Добавлен 29 фев 2016
Hi I'm Tyler thank you for viewing my channel. In this channel I will be posting gaming, mechanic, financial, diys, and ect. I don't have my mechanic or any financial degree so I don't take any responsibility if you get hurt, break, lose anything. I will try to respond to all my comments. On this channel I will try to post a video at least every other week.
Changing brake pads on Mercedes 550
I’ll be showing you how I change the front brake pads in my Mercedes CLS 550. This is pretty much the same break assembly on the S, C and E class models. If you were wondering how to change the back brakes I have a video of me doing that and replacing the rotors on the rear. 
Просмотров: 24
Видео
Changing Blinker On Ford
Просмотров 463 месяца назад
 Hope you enjoy this video of me changing my blinker on this 2012 E150 
Just got me a Chevy Avalanche!
Просмотров 1023 месяца назад
Let me know if you wanna see any more videos on the Chevy avalanche I got. I will be cleaning up the plastic and I’ll try and find the electrical  draw, which I believe I found in the video which was the radio.
Trip to the gun range. (p38 and Glock)
Просмотров 408 месяцев назад
I'll be going to the gun range I'll be sure in my Glock 19 and my p38.
Alternator replacement on Mercedes CLS
Просмотров 1,3 тыс.8 месяцев назад
I'll be replacing the alternator on my 2009 CLS 550. It is the same process for all the 5.5 l V8.
Toyota Tacoma rear differential fluid change 3rd gen
Просмотров 1,1 тыс.8 месяцев назад
In this video I'll be changing the rear differential fluid on my 2018 Toyota Tacoma TRD pro off-road.
Bike park Adventure!! 1st ride to the park on the marlin
Просмотров 3818 месяцев назад
Edited by YouCut:youcutapp.page.link/BestEditor
Mercedes 5.5 l V8 mass air flow sensor cleaning
Просмотров 499 месяцев назад
I'll be changing the mass airflow sensor on my 2009 CLS550.
Honda Accord brake lights won't go off! Fix
Просмотров 1809 месяцев назад
in this video I'll be showing you how I diagnose my brake lights. My brake lights won't go off and they kept staying on and it will kill my battery. My uncle was looking at it for hours and bought a bunch of new parts for it. he was going to install them and this saved him a bunch of time and money. I hope you learn something from it too.
GoPro and accessories review
Просмотров 49 месяцев назад
Edited by YouCut:youcutapp.page.link/BestEditor
Reviewing new track shoes I got my brother.
Просмотров 209 месяцев назад
Edited by YouCut:youcutapp.page.link/BestEditor
garage sale find, Chainsaw!!
Просмотров 1,2 тыс.9 месяцев назад
Edited by YouCut:youcutapp.page.link/BestEditor
Acer PC trouble shooting help (nitro 5)
Просмотров 19010 месяцев назад
Acer PC trouble shooting help (nitro 5)
lawn mower maintenance for the summer
Просмотров 13711 месяцев назад
lawn mower maintenance for the summer
I Gave My Little Sister $500!?!?!?!? (PRANK)
Просмотров 33Год назад
I Gave My Little Sister $500!?!?!?!? (PRANK)
Spark plug & coil replacement on 5.4 triton
Просмотров 65Год назад
Spark plug & coil replacement on 5.4 triton
God bless you! Little different in my 03 s10 but got it locked back in! Got a metal brace left but seems good 😅
ty si prejebany vyse jak ja
Nice job! What year is this? I have a 14 and it looks like the dash and steering wheel differs from yours? Love that color combination!
Thanks
2010
You posted this a year too early to be able to watch Ronald Finger's tape deck repair video
Cool
I am happy for the child!
I think that’s the “universal” TREK logo.
Music😂
😂
You can get a new block for $400 ^^
What are the torque specs that you use in it? Especially the small bolts! Thanks 😭👍
I can’t remember. I’m pretty sure I just made it snug. if you are that worried about it getting glue you could put some temporary Loctite on
Thanks for the video my fuel pump should be in tomorrow, my car would turn over but wouldn’t start .
Glad it helped
Good job. Just an idea how about spy video camera glasses. That way you can have two hands. Hope this helps.
Never force anything, just get a bigger hammer!
Yep
THAT IS THE G4GC MOTOR ... with the 45° angle oil filter
How did you know the fuel pump was the issue?
The car was just turnover and the fuel pump was sounding weak.
In my opinion, this is the easiest way to get the battery out. 1. drill a small hole in the battery negative plate with an awl. 2. drive a screw into the hole. 3. pull the screw out with a plier. * Batteries stuck inside Follow steps 1 and 2 above. 3. tie a wire around the screw head. 4. drive the screw into the hole. 5. pull the wire out. ** If the battery is stuck too badly, you can use vinegar to get it out. - South Korean guy
You clearly haven't had to deal with some properly stuck batteries! I can tell you that the force required when getting the batteries out can be considerably more than could ever be applied by pulling on a screw. Even after soaking for 24 hours in vinegar to try to dissolve the corrosion I had to repeatedly hammer using a drift tool (for seized brake pins). I had already distorted another tool trying to get some movement. I eventually did get the swollen batteries to move. One of them had to shed it's plastic sheath to be able to move. After the batteries were out I then used a drill with a sandpaper roll to clean up a patch of corroded metal halfway down the battery tube.
Thank you it was a huge help
Your welcome
1:00 i see youve also got a metro! could you make a video about that please?
Yes I can. It is not getting spark for some reason
Thats sick
Thanks
Thank you, you're the only video that shows what to do to get the fan off every other video skips it
Your welcome
What was that 4 year-old Giant bike model ?
It was a Yukon giant.
Would you have the size of the bolts for the water pump & torque specs.restoreing my 88 GMC 15 2.8 V6.
If I remember correctly it is 20 to 25 ft Lbs. pounds of torque. I’m not sure how long the bolts where it’s been a few years since I’ve changed it out
Just a tip, always loosen the fill plug first. If you drain the differential and for some reason cannot remove the fill plug (stuck or stripped head) then you are screwed.
Ok. Thanks for the advice.
Its the trek logo mate
take the light and stand off maybe
That not light that's reflector
I came here just to remember how the brackets work and toj showed me everything! Well done
Glad I helped
whats rebuild kit you used for engine?
In my later videos I end up showing why I couldn't rebuild it. The block was cracked so I'm just going to buy a remain engine or possibly a v8 swap
Not sure why I was recommended this, but nice fix
Thank you
Alkaline batteries are not totally sealed. The alkaline gasses they emit react with the aluminum barrel and cause the cells to seize tightly. Aluminum is actually a rather poor material to use on close proximity to alkaline cells. Soaking the seized assembly in white vinegar often neutralizes them enough to tap them out from the bulb end. When reassembling, a small dab of Vaseline or other petroleum jelly makes all threads and o rings operate much more smoothly. The vinegar soak cleans the corrosion while minimizing damage to the aluminum.
Thanks, if I find another stuck battery I'll try that. I not going to buy no more maglites due to the fact that most of them are not built that good. I feel like they are over hyped.
Nice. Do the front diff next
I'll try to do it soon
How many liter did u use ti fill it up bro?
@@salvadorsabling2816 can't remember
FYI crack your fill plug first then the drain, if you drain it but can’t get the full off or it’s stripped then you won’t be able to fill it back up. 3.8qts for the rear btw
Cool park
Sick! But dude get a helmet.
I know thanks for your concern. I need to start leading by example
Thanks. I am moving out without help of my parents. This is helpful
Good luck. Hope everything goes good
👍
Good to know that it could just be a rubber garment instead of the switch
Do a new shoe video
I have had quite a few mini mag lights that the batteries corroded and I toss them. I don't have this issue with other flashlights. I have since STOPPED BUYING these pieces of junk.
As much talk as I heard about these I did expect them to be pretty good. They have their flaws sadly
The problem is with the batteries not the Maglite!
@@MrAdopado The batteries aren't corroding in my other flashlights, and the batteries were from the same pack. Can you explain that?
@@toomanymodz No I can't explain! Perhaps it's the snug fit of the batteries with no room for expansion without jamming in there?
They are not acid batteries. Hence, no acid will leak out. Great video otherwise!
👍
I like that box that cool
Nice find kiddo that box is sweet! do yourself a favor and get a new bottle of bar oil, it does spoil with age. Not to be that guy but they are called chains not blades lol other than that good job!!
That's I thought that oil last for ever I been using it. I get some newer chain oil
Wow. Awesome find. Love that custom box too. I may have to go make some of those. Thanks for sharing.
Good day from Ontario. Boy that was a nice find. U can tell by paint missing & on bar. Thanks
Thank you
Where is the fuel filter location?
I believe it was built in the pump on these cars. Let me know if you find out anything different. If I'm not mistaken that little cloth thing is kind of like a fuel filter. I should have showed you the inside of the pump a little more in the video but I guess I didn't.
What did you before this started to happen anything that you might think have done this will help in suggesting the repair solutions also see on youtube and on internet for such problems.
My brother was playing Forza and he took a break for a little while and my cousin was turning it on and it went to the screen. Not sure if my cousin did something to mess with him or what
@@tylerstacy5901 ask them what is that happened in certain see if there was a direct shut down while the game was on then there are issues that can happen.
@@kiyotaka9135 That's what he said happened. My cousin dropped and broke my phone like a month ago and now he messed up my laptop so I probably won't tell me exactly what he did. I didn't know if it was like a hard factory reset or something like that I could do
@@tylerstacy5901 im trying to suggest you some videos but when i put the links the comments gets deleted i don't know why the videos are from video itself
@@tylerstacy5901 1. h t t p s : / / y o u t u .b e / I K 4 P l - p 6 k K U 2. h t t p s : / / y o u t u . b e / 5 _ 9 C w S d h D W 4 3. h t t p s : / / y o u t u . b e / U _ _ u 6 i p a 1 L U
Re-Install windows from a flash drive !
problem with storage formate it or use live linux pendrive to backup
How can I get off that screen
there is something wrong with your ssd-hdd because the stop code is in acssesible boot device. or something is wrong with win 11.but its something with your ssd.you need to buy a ssd or give it to the service they will change it.
My friend Ben was telling me something's wrong with my memory or my windows 11. When he was coach shooting it he knows Linux was on there instead of window
Where did you find the pump? Bought one online and hoses didnt fit the clamps.
Did you buy the right pump. One side is the fuel pump sending unit, and the other side is a fuel pump. The pumps are different but they look similar. Or they might have just sent you the wrong pump. I got mine from Amazon
Hey man im struggling to install my rear brake peddle on my yw80 could you make a video please 0:04
I would make a video on it but I trade it in for that Suzuki four-wheeler you can see all my video. Installing the back brake isn't that hard. If your cable and brake level is all there and working you might just need to adjust your brake drum on the rear wheel. I have a Honda XR200 it has the same brake setup I could kind of make a video of that if that would help.
If you want me to make a video on my Honda I can do that but it would be a little bit different then the Yamaha. If you want to see a video of it you can let me know. But on the cable there's a little wing nut on the back by the drum brake and all you should need to do is tighten that if your break isn't engaging all the way.