- Видео 6
- Просмотров 231 958
AMT CH
Добавлен 5 янв 2010
Just What I want to do
Видео
stop bolt catch break with quarters
Просмотров 16 тыс.4 года назад
Build ar15 ar9, safety tuneing an ar9 so you don't break a bolt catch or have miss feeds
Milwaukee sawzall blade holder repair
Просмотров 29 тыс.6 лет назад
Repairing the cam on 2720 20 m18 amt
Giving me fgc9 vibes the looks of thay gun
I did that 2.75$ 👌🏿😂 thank you plus you don’t hear it
I didn’t even consider this! I just built my AR nine and now I have yet another thing I have to remedy so I don’t destroy my bolt catch. Thank you for your video.
🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽
I tested mine out , looks like im having a failure to feed issue , i shot like 4-5 rounds than the last one fail to feed n my mag dropped from the mag well, im using a AR9 mag well adapter
Building the AR9 too im looking into this issues and getting my self ready to troubleshoot incade i have issues , im waiting for the Mag well adapter
Can this happen with a 7.62 ar?
Not usually but you can slide the bolt back and if there's a gap between the lrbho add a quarter
Im doing this with my aero epc 9 right now. My bolt was coming too far back and sticking towards the rear so I threw two quarters down in the buffer tube and that seemed to fix it 100% but now I can't get the last round bolt hold up and to actuate. And then now when I take the quarters out the last round bolt hold open will work but it holds the bolt when they're still rounds left in the magazine so I think my last round bolt hold up and must be bent
Yeah sounds bent
I've been doing this for years with rifle buffers tubes using carbine spring and buffers, fill up a carbine buffer, then put all quarters in those in the rifle tube, put a red marked quarter on top, fill it with more quarters and everything past the red quarters is what you need
And also when the SHTF you have an extra $2.75 hidden away 😅
Or use washers, thats what i did
Didn't think of that. could have saved some change 😊
Thanks for sharing. It's funny it took me 6 months to figure out that my 9mm BCG is .75 inches shorter than a standard BCG. A standard buffer is 3.25 inches in length, and they sell a 4-inch buffer to address this. And like you show in the video you can use quarters or a buffer spacer. The other thing I finally learned was the need to get your buffer system and BCG to a weight above 22 ounces. I accomplished this by buying a 7.6-ounce buffer, 1.8-ounce standard buffer spring and my 12.6-ounce BCG. Lastly, if you have ejection issues search youtube for tuning your 9mm pcc and review how to adjust the ejector in your lower. Good luck, I hope this helps others. -GB
Great video! You can actually see cause and effect. No other vid shows this... thanks alot for sharing!
Thank you very much for this video. I snapped a blade last night and was dreading tackling this repair. Your Video helped tremendously!
Springco orange spring and spikes ar9 buffer is the way to go
How reliable is your LRBHO on the QC10 lower? Mine is very finicky.
I have a foxtrot mikes lower and it been good for 6 years so far no problems at all
I am building an ar 9 and I like to know what buffer weight are u using ?
Tuning a bit after breaking hammer and trigger pins. Hopefully all my issues are good to go.
What's your barrel length and buffer size
What size spring and buffer
6.4oz 308 spring
You're the best most awesomest helper/cool guy/ do you want to be my friend kind of guy... anyway great vid
I bought the aero heavy 9mm weight and it needed no quarters. Or put in 1 quarter to stop the bcg exactly at the bolt catch with no extra rear room.
I like mine to stop one quarter space past the bolt catch to give the catch some time to pop up
hi, what's the buffers weight ?
@@alecmya 6.4 for a 3" ar
@@ashash4tube tnk u, but what the 3" means
@@alecmya barrel length you need more weight for longer barrels
What bcg do you recommend.
Depends on how much you're wanting to spend on a basic setup any bolt that's nitride with magnetic particle inspection is great if you're looking for good coatings to make it easy to clean and buttery smooth titanium nitride or PVD is great cryptic bolt carriers have some of the best coatings
@@ashash4tube what lenght barrel you recommend sorry for asking so many questions.
Depends on what your aiming at I use a lot of 3.5" and 4" barrels with linear compensators to get past the handguard
@@ashash4tube buddy has a 3 inch hes selling is that to short of a barrel.
@@jerryv9962 most 9mm hand guns are around that length . With the right sites you can take really long shots. I prefer the shorter barrels for my builds because they're safer with all types of ammo where longer barrels can be dangerous with heavy ammo if not balance properly (buffer)
Haha little dudes always gonna remember these days!! That’s what’s up
That pin is the worst. I’m 5 beers in and I’m about to smash this bloody thing .
Normal kids: gun scary me at 7: Dad i think im ready for the 50.
Dude, you just saved me a lotta heartache and money. I owe ya one. Solid video. AAA+
Pumps it this is for you mom proceeds to shoot it into the sky
That's where you shoot shotguns
What weight buffer and spring you using bud.
308 spring and a 6.4 oz buffer
@@ashash4tube dang my buffer might be too heavy 8oz will it still work bud.
@@jerryv9962 it might work I think 8 oz is usually for long barrels, suppressed guns and 45 ACP
Hey bud is that a new frontier upper reciever.
How do you get the ring back on
Press one side down flat in it's track then press all the way around till it snaps in if the tracks not fully exposed keeps playing with it till it is
Atta Boii...😎 You got your self a NEW Subscriber!
kid shot it like it had no recoil lol
yo I thought the little guy was about to fall over.
Thanks a lot for your vidéo 😁 was able to solve my problem... but mine was only jammed and had the metal protect cover of the spring... well the first part when you reassemble the saw mine t=one end was all crushed in the center... I just put it back like I could but the problem was really the dust... all good now thanks again :)
Así son los de la zona 18
That holy shit was the most reasonable holy shit ever
Haha no hesitancy
Lol
Lol nice bro 😎
I've tuned multiple 15s that people had trouble with using quarters. It helps with bounce aswell that causes jambs
🗿 for what
Handled that like a champion
🤣🤣🤣🤣👍
Seriously, I can’t watch this enough!! I love it 🥰
Every one should learn
Black aces tactical Pump shotgun . Nice , the recoil isn’t bad on this firearm
I thought this kid was going to ND when he said this for you mom
How many rounds can fit in this mag AR 15 mag ?😯 ruclips.net/user/shortsaIidqmnGrSg?feature=share
In Mexico we start shooting the AK my ten. 🥱
Training him early!!! I’m al for it!!!✊🏾✊🏾🔥
The hoodie tho
Todos