Видео

Thks for the video i used pillow box bearings

Have an 03 TB with this same problem. Anyone know anyone in Indianapolis that might be able to do this?

Thank you sir, you just saved me hours

Happened to me in rush hour traffic as I was coming into Charlotte NC. Had to slam on my brakes and that's when mine popped. Hair raising ride to find a place to pull over and investigate (Closed weigh station). Thankfully my trailer brakes were good. Drove it to an auto parts store (parked in the center turn lane), bought the hose and some Mercon V and fixed it at a rest area.

I’ve had both and I prefer the 150 also. I get one or two jump out of the 155 150 I could start 10 or 15 cars on charge

They are on sale on Amazon for 239 right now

Never would know the weight. Great tip my friend!❤

You didn't hit the boost button on the 150 when you tried to start the truck.

so was the problem a bad cv joint for the rear driveline or was it the u joint…????? i have replaced the front driveshaft front and rear u joint and when i go into 4 wheel it isn’t as bad as it used to sound by a lot but it still makes noise when i go into 4 wheel when im in 2 wheel it doesn’t make any sound at all ? reason im asking is i work at a ski resort seasonal and i need to have my 4 wheel to get to work and back

i got the exact same leak ffs lol.well i guess ill get started lol..thanks for the video

Great video, gonna try it soon, thanks!

“SOSfix Electronics” has cells and will rebuild it. Search the RUclips for him. He’s in Florida.

I have 2007 Ford Explorer XLT does anyone know if this will work for my vehicle as I am experiencing the same issues.

Thank you. i did what you said it worked on my 1998 expedition. Good job

I have 2008 ford expedition eddie Bauer thank U your fix work for mine

OMG!!! I have never commented on a RUclips video before, but you just took me from four hours of frustration to success in ten minutes, THANK YOU!!! If there is a way to instant message on this give me your state and city, IDK where it is I want to buy you a beer and steak dinner!!!!

10:36 Icon easy out kit gets the broken threads out, learned that the hard way

Nice and simple idea, need to keep an eye out for a junk S cam now 👍 . Probably worth splurging on a new slack adjuster with the weight behind it

Been doing that for years

7.3L Power stroke is closer to 1000 lbs than it is 800 lbs. I think they're around 920 -930 lbs.

That is a beautiful truck

Aww like at my lil bro Tirgi Wergi 🥹

Hey opa is that the engine that was inside the truck that we were talking about to be my starter car

When the GB150 stop working!!! If want,take apart and see if can replace the battery in side! There are youtube videos of DIY ,,replacing the batteries

You wear them sunglasses at night vangieson?

damn, dude. you went to great lengths for this. I would have called it junk. Im betting ill find rot just like that when I got to swap my "control arm". Now Im scared. :/ Thanks for the video though.

Doing this job tommorow! Thanks

This is not the same for 99 we have 3 bolt

Thank You. ! Good Tech. To Know ! 1999 F350 7.3 From New For Life New Sub

Where are you at

Excellent and well explained. Not sure whether to get the worm drive rotator or build one at the moment, but this gives me great options. Thanks!

dude hold the camera still, everything is blurry. 😅

Very helpful to see it done. Thank you much!!!!

Fun fact … the GB150 was always 3000 rating … the first batch had the 4000 written but was incorrect 👍🏼 I have the early ones which say 4000😇👍🏼 but the later ones say 3000 on them…the GBX250+ is a beast and has the display, no idea why they removed that feature on the GBX 155 🤦… nice review

Mine are gonna leak. Right by the bolt attachment. Need to learn how to release the disconnect. Ive pulled EVERYTHING off he engine at this point. Fuel lines r easy....now

Mohr Row

I got almost everything, couldn't find used S shaft and slack adjuster so new about 90 bucks so a first time welder here we go.

You fried your jump box because you think its a battery. 😂😂

The gbx puts out 14volts when jumping. It auto shuts off because when you use it longer than that you start to damage the the jumper. It's not ment to charge a battery.

This is a huge problem with the 97 Ford Expeditions... I've owned one since 1997. Mine was a special order in those days. Each time it goes to the shop for battery replacement, the alarm system sounds ...driving everyone nuts. I've told the technicians what to do, but they won't take the time to do it. Hope they watch your video.

So what is the benefit to deleting???

I enjoyed your review and comparison...Noco should make a new GBX155 or similar with the digital readout, because I love that feature as well. I guess there is pros & cons of everything. Obviously, your 5-year-old unit is getting tired and has less power. I know from watching other videos (Tony Childs video titled "What happened to the Noco GB 150 4000A jump starter" video. He mentions that he did research because he heard that Noco changed the labeling on Noco GB150 4000A to the new version of GB150 3000A because the UL listing on Noco forced them to change the labeling to 3000A for whatever reason. He mentions everything stayed exactly the same on the newer Noco GB150 3000A in comparison to the Noco GB150 4000A. even the price. The only difference is the 4000A rating changed to 3000A rating (labeling was the only change). So, in other words Noco didn't discontinue the GB150 4000A model, they just relabeled it to say 3000A, according to other videos. So, I don't know for a fact, but mechanics and other videos mention the change of labeling. Keep up the good vids

Saved my ass with this video. You Rock Like Tube Socks!!!!!!🎉

I found it easier to take out the inside fender wall and go that way

Dam. A deleted pedestal is cheep. Time is money. Think I’ll just buy one.. but if I was broke at this moment. This is a easy option

I just used this information to fix my truck thank you

Thank you so much. I have the exact vehicle 97 expidition tryied it first time didn't work. Second time left key in car when i hooked up battery turned on key light went off working great now you are awesome.😅

I found that you can get both new at Napa for about $25.00 each, matched.😂😅

I'LL JUST FIND OUT WHERE YOU ARE AND YOU CAN HELP ME CHANGE MINE OUT OK?

Thank you so much! Saved my today before I sent for a selenoid! Thanks again!