Видео

Very interesting indeed. Looking forward to hearing more. I'm hoping some day Ecoflow considers USA support vs. having to wait 12-24 hours for someone in China to respond... that's problematic.

That sound... sounds like violent robo porn

FYI If you do a firmware upgrade be warned that Wi-Fi versions above V3.0.2.21 do not support local monitoring. I use Home Assistant to monitor my Delta Pros. The Wi-Fi firmware above V3.0.2.21 block the port used by the EcoFlow third party monitoring add-in.

Odd. I'm interested in the follow up.

Wasted 5 minutes of my life I will never get back.

I could tell before you started that its wasnt going to end well.. None of the battery sprayers will shoot paint that thick, Id try again with some thinners ran through it at least half that thickness and go from there.. My air line sprayer has a hard time with normal paint and thats 7psi.. I usually water it down 1/3rd

It's like the wild west out there with solar panels - nothing is standardised. What should be a simple transparent activity turns out to be complicated. I've got a Longi panel 450w and a Ecoworthy 100w panel, putting them side-by-side and measuring the short circuit current shows the Longi is only double the current of the ecoworthy when It should be 4 x, given power rating. One panel gives a VOC of 36v the other gives 24v and because of the power difference they cant be put in series and because of the volt difference they can't be put in parallel. The whole things a dogs dinner. I'm backing off from solar upgrades until they standardise the specifications, otherwise it's an expensive minefield.

How about longevity? Is yours still working? I’m skeptical whether it can stand that much power in such a compact form factor.

It's $109 on Woot today but I'm not sure it's worth owning a carpet cleaner vs. renting the professional machine from the hardware store for $35 once a year.

The one I have is the CarpetXpert HairPro. And it picks up SO MUCH embedded pet hair. It’s really surprising how much dirt and hair this unit picks up. Nice job Shark.

The included solution works well enough. But I would try different solutions in the future just for cost saving purposes. I used all of the included cleaning solution. Gonna try some different options for the diluted solution next time I use it.

I got one of these on Tuesday. The thing isn’t cheap. But I works very very well. Especially on pet stains and actual stuck on messes. Came out no problem. I would recommend this unit for sure.

I looked all over the costco website and never managed to catch this price. Looks like you scored a very short-lived deal.

Had mine 3 months it hasn't worked since 2 technicians later still not working

Thanks for the video! Do you know if one can use the sprayer for ceiling painting?

I had previously seen this chain for sale on Amazon, and asked about the fit in the questions section. I got a reply back the next day from the vendor. They told me the chain WAS 69 drive links. Why they haven't changed their ad copy is beyond me.

Chain tensioning assemblies are notorious for being fragile on some saws. I don't know that to be the case with this saw, but I never 'snug up' the cover with a wrench when adjusting the tension. Finger tight on the cover nuts, raise the tip of the bar as far as it will go, snug up the chain, and THEN put the wrench to the cover nuts. No broken tensioning assembly for ME.

I was looking for a video in English. Thank you, after watching your video, I bought it in yellow with a dewalt adapter.

Does the ecoflow battery back feed to the grid?

Ok thank God I found your video. I couldn't figure out why the pump wasn't working but I didn't realize the bucket had to fill for it to start working. So to test it I can just fill the bucket with water and put it back in the unit to test the function before I leave for a week-long vacation

More circuits is a must

First of all, he's pronouncing it wrong. Second of all, with these units first came out. I purchased him as an engineer. There is no flaws with these devices. I have 4 of them the Eco flow. I have the pros. I have four units and I have never had a problem with either one of them. I've been an engineer for 30 years. It doesn't mean I know everything what I'm saying. Is it seems like every time certain people get these products? They always find something wrong with them. The product is supposed to be charged. Plugged up, use, most of you guys are always trying to Come up with a different schematics. For these machines or change the engineering or design for them, leave them alone. It's not meant to run. The world is meant to plug in, use it for a while, and then recharge. It, it's just a battery, plain and simple jesus. You always trying to put some type of an adapter or some type of extra apparatus is something that doesn't need to be plugged in. That's not what it was designed for it was designed for you to plug things into it and case your power goes out. Plug your TV in plug your saw. In you know, to Plug different units in for a short period of time. It's not meant 2 like if you have a power outagefoura day or 2, 2 be washed and clothes with it and 2 try and rig it up to do something that it wasn't designed to do. It's a great design. This is like, uh, yeah, guys will go out here and swap an engine in a car. And get upset because it doesn't have the right to cubic feet that they won. It wasn't designed for you. It was designed for everybody to run a certain way to put a certain engine in it. Then you got to remodify it and cut this cut that man, you guys are a piece of work man, the machine works finely but the hell alone. Because you're making other people that only wanna use the machine for basic use. I think that the d*** thing is defective and it's not. It's you who are defective with that mindset. I used to sit in shop class. All types of other communication classes, electronics, class and guys want to come up with this. Astronomical a** mindset, that's fine. Go do it on another product because you're making the product look bad. Other people are looking at it, saying it's worthless. It's cheap, that's a d*** lie. I've had these products for years and I haven't had any issue with them cutting on cutting off breaking or anything. But you guys put him in the back of a pickup truck and you jar them and you you got 'em all over the place, they're everywhere, bouncing doing things that they're not supposed to do and then you wonder why the s*** doesn't work?Come on, that's stop being stupid

What year is this unit? Maybe the new 2024/2025 units are revamped for the better?

There’s something to be said about the 3d model itself being designed with supports in mind.

I have the exact same problem with the 5amp hour. Funny, tech support says they have never heard of anyone saying that the unit shuts off. I thought I had a bad unit, so I took mine back to Lowes and they swapped it out no questions asked. But same problem with a different unit. What bugs me the most is Ego won't admit to a design flaw or whatever the problem is. I assume it has some type of thermo protection sensor that monitors motor heat and then it cuts off. I live in Texas and I notice more of an issue. when it is 95 plus degrees out. It's now fall and 75 degrees and it doesn't seem to cut off as quickly.

Your reviews are frustrating border line ridiculous. In what world do you consistently through multiple videos not wear eye protection when using a chain saw. This one was even worse as you could not see what you were cutting... You need to step up your game IMHO

Yea, but how used? Is the key..

Can a Honda gas generator supply power to the Smart Home panel 2?

Have one here ,we use for hot 🔥 tenting, absolutely love it ,zero issues. Just make sure you charge it for 8 hours fully the first time and then it will recharge the way its supposed to or you will kill the battery when you charge it in the future though. I bought a spare battery for mine for 25 bux on Amazon. Love that its Not a lcd display though, i was worried about that as lcd is terrible in cold .

It's Bambu Labs Black Friday Sales and before Dec 3 2024 I am going to place my order for this printer. I wanted to thank you for making this video because I too will be thinking this way and getting puzzled but I am going to have a mug of coffee as I proceed to embark on this journey too. Great video enjoyed your process of analyzing each step of your set up. XD Happy printing.

Mine will not connect to app

If the electronics in the SHP2 gets damaged, is there a way to bypass it on the SHP2 to get power directly from the main panel? This seems to be an important requirement if I'm putting all my critical circuits into the SHP2.

Would have been nice to see the sprayer with paint watered down 😊

Battery doesnt last. After about 3 to 5 charges or so it will go die immediately. Needs to be plugged in permanent after a short time. Other than that ita great.

In Vietnam, the Grid supply is having only N, L(220V) and Grnd. Does the SMP2 work with this grid supply?

In Vietnam, the Grid supply is having only N, L(220V) and Grnd. Does the SMP2 work with this grid supply?

“Daniel Son” … I was getting this same ‘cut out’ with the 5.0 Ah battery, whilst in Turbo. Pull the battery, then it restarts, but will cut out again when Turbo is engaged. Talked with my CherVon Rep, and Ego, and then, while I was waiting for a response back, the impeller lost a fin, when my Wife was running it! 😮 Now it is just hanging on its peg in the basement stairway. Cant locate my receipt, and Effing Lowe’s is NO Help! I am demoing the big 80 Volt Greenworks right now, and while it is not the most ergo blower, it does perform well, maybe just below the level of the 765 EGO. But the battery and charger system works well, and battery is charged up quickly, and battery never gets hot! I am not invested in the EGO lineup, and until Lowes can get me a copy of my valid receipt, I may just change to Greenworks! Great Video and possibly good PSA! Come on EGO/ CherVon! Get it together!

Having the same issue; thanks so much for posting

Where did you find the DVH and the cables to connect your 2 DPs to the SHP2? I want to change over to the newer system and get the DPU.

On the Original SHP I can run some circuits on solar and some on grid and make changes on the app depending on battery percentage, Will the SHP2 have the same functions?

How do you have it all wired up

I just installed this dehumidifier today and hook the garden hose up to it to my floor drain. Can't get it to drain through the garden hose. It just fills up the bucket. Any thoughts?

Excellent! I did not know the difference between XT60 and XT60i connectors for my new solar installation project. I have Delta Max and River Pro power stations. Simple, look for the center pin at the side and you got a XT60i, otherwise it's an XT60 connector. Easy Peasy, thanks!

I like that the SHP2 has 3 i/o ports, but would be nice if there was an option for 3 i/o ports without the smart panel part.

RTFM dude...that way you do not look like a fool when making a video on a product review.

Bar

I have the same issue..but I can't get it to even start. I have the same ego blower with the intro model..and I use turbo all the time..and works great even after 5 years

I am off-grid and hope you can tell me if I can use this panel in place of a main breaker box or do I need both? That seems to be redundant since I will have all my circuits on the Delta Pro system (except Air Conditioning since those will be totally separate)

I have an LB6500 56V EGO blower and same thing occurs with mine using a 5.0 AH battery. My EGO battery just died (lights just flash red) so I bought an after market battery which works fine under normal blowing, but still has the same "cut out" issues of the original EGO battery. This is definitely a blower issue and not battery issue.

Can you run a second or even a third pair of DP's in the SHP2?