Видео

Next time put tape on it before you cut it an leave more slak am keep your bolt on wand all so for just in case or if it snaps you have what you need to fix it again on the go

Moving right along! Nice to meet you at Call's the other day, and those guys have been great to me! Who did the drywall? I'm going to need someone.

Wow ! That is quite a run good for you 👍& absolutely beautiful views every step of the way, Thanks so much for sharing :) I will check out some of your other video's :)

Great woodworking skills, exactly what I’d want for mine. Don’t need the lock washer with the lock nut, save the extra 50 cents 😂

It's cold shit try -35 for 2 week I in canada look out Alaska

Good job 👍

Hello, Are you interested in testing our products? We would like to invite you to test the Camo Seat Covers for your 2021 Honda Pioneer 700

Cool video.

Are those Clydesdale rated? lol

Glad you decided to do the cold storage. Going to be a good sized house when factoring in the basement.

That's a nice looking boat.

I went with a second battery for my 2020 pioneer 700-4 but you also are recommended to change the spark plugs every year.

I thought i had to cut 2 little slits thanks for the info. And also my first gun was a mossberg 930 and the element waterfowl is my second both in 12gauge the 930 has a way better recoil pad and it also has less recoil overall. The element is much more expensive feeling and easier to clean but im not impressed with the recoil pad

Nice hole Joe! Would you tell me who dug it for you? looking to have one dug in a few weeks just up the road.

Looks like a good plan.

Actually you coil put a filter on that fuel line

Use rec fuel , drain it in the winter. No room for a fuel filter so clean the tank

Congratulations on them making it thru winter! The move part in the beginning was confusing. Where were they and why did you move them?

Hey french canada here,i put 2 battery on my 700 honda .i got tracks on it .2 winch ,one for front nomal us , and one for frint an back for plow an snow trail groomer .at -20 degrees average it help for winter .just start the sxs an let it run 4...5 min before putting in gear to warm up motor oil .5w30 is better fir cold weather .tank

put boards with cross broads inside

With that kit you bought for $2.99 you skipped a step. The u shaped piece goes on before you crimp anything. It makes a smooth transition and put less stress on the cable. I fixed lots of cables on tow trucks. Most cables would only last about 1/2 as long with out that u shaped piece.

I use eyebolts - eyes outside - on all six bolts to the uprights on either side, then strap over the top from any-to-any of the other side's six.

You kinda showed us nothing.

I used motorcycle foot peg brackets to mount my light on the bumber where your mounting yours.

Hey man! Your video cropped up on my recommended randomly. I don’t know why because I don’t really go after beekeeping content but what the hey, my dad keeps bees, I’ll give it a watch. If you’re open to some constructive criticism: You’ve got an awesome voice and personality. It made me want to check out the rest of your content, so good job you there-also the mic seems to be great. On the topic of the mic, in my opinion you spent too much time talking about/being self-conscious about the mic and your camera angle (worried you’re pointed at the ground, etc.) As a non-apiarist, I’d be much more interested to hear more talking about bees and their behavior and needs in the winter, and maybe how that differs where you are vs talking about the mic, the snowblower in the bg, or filming stuff. Don’t be afraid to cut-you can hard cut out stuff like clipping your mic back on, and just “smash cut” back to you talking into camera or a shot of the hives. Where you live is gorgeous! And I look forward to checking out your other home videos. Maybe think about grabbing a torso harness or something for your phone so you can have both hands free while filming. Cheers, and I hope you have a great day.

there is a lot of moisture in your house because it is new. All the drywall mud and wood hold moisture that will take time to draw out.

That didn't look too bad to lay out, nice that it's done now. Hope it helps. Small correction, mil and millimeter are different measurements. That barrier is 6mil thick, which is .006" not 6mm which would be about 1/4".

You should add a directional spotlight just like the old police cars.

Harbor freight has a set of push pin tools and pliers that make removing the pins easy without damage. You might want to add dielectric grease to your electrical connections. And, extend your vent lines. The Honda side by side forum has s lot of knowledgeable guys that have a lot of experience. MERRY CHRISTMAS 🛐🎅🤶🎄🦌🦌🦌☃️🌧️❄️

Nice set up. I think the knurled face of the L-bracket should mate against the knurled end faces of the light bar.

🤗🏆🇺🇸🙏 Thank you for sharing MERRY CHRISTMAS ❄️🎄🎅🤶🦌🦌🦌❄️

Honda makes horrific batteries. My family had 3 new honda suvs and all 3 had dead batteries within the first couple of weeks to months of ownership. Beyond pathetic (I’m guessing it’s a chinese produced battery).

Could have put the nuts side of the bolts on the outside so not to snag clothing when working in the truck bed. Carriage bolts would have been flush on the inside. Nothing sticking out then.

I am so glad the algorithm popped your channel up in my feed. My wife and I are just starting to build in your neck of the woods and your home build videos are a great help, not sure what town in the valley you built in but we're in Bedford! We have power and water that we were able to get done this fall while living in our fifth wheel on the lot over the summer. Jumping in this spring and doing most what we can ourselves. maybe I'll run into you around town! It's pretty weird, I have a pioneer 700 (which is the video of yours that popped up in my feed) and knew it was Star Valley when I was watching you fidget with the battery, I have bees and I'm guessing that you moved to wyoming from the state that I'm living in right now! Anyway, thanks for the content! Matt

Steps and trap door look great!

Never would of thought those colors would go together but none the less it looks great.

lol... sees steam.... yup its hot

Everything turned out so nice! I love the wood stove, I was hoping you would fire it up! Enjoy your new home!

Congratulations, it's a very nice house. I was worried we weren't going to get a house completed video or at least practically completed. Here's to the fond memories you've made along the way and to the memories you'll make in the future. Cheers.

What a difference the baseboard makes, looks great! Looking forward to the finale!

Looking good! I'm sure you're anxious to move in!

Needs a load test

Hi Joseph, i just wanted to say that I've really been enjoying your house build videos. I don't tend to comment on a lot of videos, and I know that you are using these videos as a way to document your house build, and when it's all done I don't know if you'll make any more content, but I wanted to comment that I look forward every night to watching your latest update video. I've watched since the beginning of the build during the summer and have been really impressed with the progress you've made. The house is looking great, I can't wait to see it completed. Thanks for posting your build. P.s. I've been wondering how you're wife's finger has been doing since that incident several weeks ago. Hopefully everything is good and healed up.

Pls. H old the camera closer to you mouth. Audio is bad.

Just buy a cable cutter and swager or you'll end up with a big mess like you have.

We’ve enjoyed watching all these videos. Frankly quite amazed. Question: in this latest, what are the green tubes wrapped in black that are being buried? Must be part of the septic system?

Boil a kettle of water, pour over battery slowly, wait 5 minutes and start.

I feel this channel will grow enormously soon, amazing content!

We are doing a mix of those cabinets and the white shakers from ikea.