Видео

Where are the follow on episodes as the Playlist has run dry? Thank you.

We've used First Tunnels for over 15 years (we have 5 tunnels) and highly recommend them for products and customer service

Fantastic, the manual is pants, it's for a completely different controller 🤦‍♂️🤷‍♂️🤣

How do you turn on and off the alpine mode?

So you weigh the chicken raw in grams to determine how many grams you have?

hi , great vid , just wondering have u ever heard of the controller settings access fail , ? i cannot get into the settings to adjust fuel/hrz rpm etc , maybe this is a cheap generic controller (comes with heater) that hasn't got that feature > thanks ( mine has a cog symbol not wrench) cheers

Hi everyone - mainly Grantsyard and Van Life UK - thanks to them to explain "advance " programming after entering password code "1234". P & t is manual heat control or thermostat control, 1 & 2 is selection between 12V or 24V, H & L is 5000W or 2000W, last number is 1 - 16ml, 2 - 22ml, 8 - 28ml dosing pump. Today I tested my 5KW heater with this "spanner" setting button controller model - all perfect, on P-01 heater 175*C, exhaust 220*C, only two LEDs, on P-05 heater 190*C, exhaust 340*C, four LEDs, on P-10 heater 206*C, exhaust 490*C, six LEDs. A lot of heat out of exhaust - my intention is to make muffler combine with heat exchanger to heat water for additional small hydronic heater and shower in my mobile home as next stage. I hope that software is and will controlling fan speed & fuel dosing to good combustion without "manual" programming fan & fuel ratio as on older controllers. Personally - I'll prefer option for "manual" for case need to do it - going to top on mountains - do not know yet how this controller will behaviour. Good luck everyone, Vas.

Hi Grant, can you please do a video where you can attach an inline on/off switch as the heater turns itself on if you don't unplug it. Looks like you don't reply to people's questions, oh well!

Looks fantastic! Love the methods you use for the beds and soil mixture! Our tunnel will be coming in next week, and I'm gonna definitely use some of your techniques! Up in the mountains of New York, we have just rocks and boulders, so it's impossible to plant in the ground, so raised beds are a must-have. I'm not sure if you have it yet, but I saw a lot of people install rain gutters on their polytunnel that deposit water right into their rain drum/barrel for maximum collection.

I used First Tunnels and built a 12 foot wide 32 foot long tunnel just recently.The tunnel is excellent and the service was second to none.I would recommend this firm 100% and I am already thinking of my next purchase.

PEOPLE WHO DONT GROW FOOD WILL SOON STARVE

thanks, is there a way to adjust the rpm and fuel like on the older controllers with the settings picture not the spanner on the top left? thanks

When I turn the power on for my heater. I get nothing to set the clock just shows p12 which is voltage. If I press settings (top left and ok nothing happens. Which also means I can’t set the timer. Confusing to say the least.

I thought of using used motor oil in a sealed copper tube rad that would have exhaust extension clamped and wrapped to it.

I need to switch it back from temp to power settings

I have a diesel heater that will not light. I've taken it apart three times it's been cleaned and was not dirty. The are hole next to the glow plug is also clean. Also installed new gaskets a new glow plug. Every time I try to start it it just smokes. I did notice when it starts now the fuel pump runs five times

You are the best,who clearly showed how to pair remote. Thank yoy

Me after learning about Lyme disease and what can happen if that kind of tick bites you for more than 36 hours: 💀💀

I can't see from the video how hot does the plastic enclosure gets. I want to mount it under a seat where it will be close to the seat foam and mounted on a floor which is carpeted and I don't know how big of a cut I need to make in a carpet to fit it.

Do you know, is possible to use heater only as fan? In summer, for air circulation and cooling. Thank you.

Very helpful video, so firstly thank you. I think my timer must be set, but didn't set it. I have only just installed the unit it's like yours in the video but I've had it for nearly 3 years. I never set the timer but I walked out to the van this morning and it was going but it wasn't warm, how do I turn it off the timer please mate, and why would it not be hot, does it need to be primed before start every time? Thank you

Some Hybrid varieties of Tomato can be bland...

Get rid of the gap or rats and mice will eat your greens

Very helpful, as you say not many clear instructions for the spanner type of controller. Your site description sounds very familiar. Off now to almost finish another project. 😊

Best demo I’ve seen on this

Any chance you could post the jig dimensions somewhere?

you might could try a smaller barrel -less mass to heat might give you a higher temperature, I am going to start off trying a metal 5 gallon bucket with the exhaust coiled in the bucket and attached to the bucket inside with small pipe hangers so the exhaust pipe is toudhing the bucket. I am also considering stacking fire brick in the center of the coiled exhaust in the bucket. a small fan might help distribute the warmer air inside the building for a more uniform temperature

I used two transit egr coolers together and ran water with a small pump to cycle back to the workshop into a barrel , giving me warm to hot water for hand washing and a heat storage

Fantastic video as I have this one so useful 👍 Question When you turn it off and the control panel goes off not lite up is it still using power from the battery 👍👍😜cheers

Well better late than never I suppose... Great idea. That mass will give you a thermal flywheel to try and keep the temperature up for free in your work shop. If I ever get around to buying one of these heaters I plan on experimenting with a coaxial exhaust pipe. The idea is to put the smaller hot exhaust pipe inside a larger pipe supplying the cold combustion air. I think this would burn the fuel better since warmer intake air should vaporize the fuel better. The exhaust after that sent to your exhaust battery could improve things?

Thank you mate. What can I say, very useful and helpful, fantastic video. Sorted out all my issues and up and ran very quickly. Thanks again.😊

Loved finding this as I am about to embark on the same crazy journey over here in Australia. I am wondering if you finished it as I can't see any videos after the door at the back. Keen for some help so I hope so hahah!

Try: 1. Looking up David McLuckie (iirc). 2. An EGR.

i use temp mode, works ok has a 2 c band that needs to drop below before it turns the heater . good for controlling carbon build up.

Hi my triclicks engine temp goes to 200 degrees C and tuns the CLEA function on power off every time, even after a few minutes. Does this sound right?

I've been advised that when mounting it on it's side that the Glowplug must be uppermost. If at the bottom it will not work properly.

Good for you Grant, my boyfriend spent a day destroying ours. I done it in an hour after watching.

Mine is showing E-10 can you help

Looks like a well built unit and it came with the better fuel line so that's another good point! I like the idea of using the "oil extractor" on top of the tank instead of the cheap oil spiket that they use on the bottom of the tank which is suseptable to leaking. The control is simple easy to use when using just the 1 thru 10 to control the heater. I see they're out of stock, but there are plenty of identical heaters by other names that are all made by the same manufacturer at different prices, so just get the cheapest one and you'll have pretty much the same heater (but it may have the cheap green fuel line you will need to switch for a better one)

just started mine thanks to this video. my engine temp goes past 200 c. is this normal? thank you

what about running the exhaust through a car radiator or a heater core, with a fan on the back of it to blow the heat through the room? or would it melt the soldier joints? anyways that's a different project all together, i was thinking if you were to use a drum half the diameter but taller you would feel the heat quicker, hotter and more heat would be ready made available,

Great vid, can I suggest that you get that wall behind you repointed ....

I have diesel heater what is this all about do i have do this to my heater ?

thanks...i had no idea how to pair the remote....you sorted that

What a nice video, thanks for sharing 🙏😁

Fantastic mate, saved me a lot of time, cheers.

Is there a way to get the settings that are in there to start all over and get it set up right? Please help, thank you

Mine won't start, flashes E-01 ,any ideas ? Thanks

Hi, Been following your videos on the air heaters for a while……I finally got around to installing one on my shed….messing about with it all day yesterday I am now somehow locked out of using PIN 1688…..fortunately Google found that 9009 also works…. Any idea how I can reset it so that 1688 works again Many thanks

Just installed my heater and it does not power up tried everything could think of and no luck I bought a new set of motherboard control panel and remote fitted it all up and still no life in it any suggestions would be greatly appreciated thanks Tom