Видео

Most people call these VVT Solenoids

what was the torques bit used for the head bolt t55 felt loose

Exactly the problem im having and i have no idea how to fix it

What body kit it that ?

Mix acetone and ATF 50/50 in a squirt can and use it for rusty nuts and bolts. Acetone eats the rust and the ATF helps it wick into the threads.

Any time you take screws out, set your screwdriver in the scree and hit it with a hammer first. The hit will jar the rust loose. Or you can buy a hand impact that has screw bits and set it in the screws and hit it with a hammer. It actually turns as you hit it . Make sure its turning in the right direction.

4:13 hawk tuah! i cant! lmao

You need a vented hood and ducting into the heat exchangers.

My 2017 twin turbo raptor having a issue with Liqui Moly Geartronic, the transmission's fluid pressure is 0.9bar, is there any valves that limits the pressure?

Bank 1 is passenger side, you did the wrong side.

Thanks for this. gonna do this soon shouldve done it when i did the sway bar + links but was losing daylight. And being in the NE , diy car jobs usually don't go as planned.

So $1,500 for shit?

I’m in the same boat. I just replaced every single sensor, the wires are good and the it’s still doing the same thing. I’m loosing my marbles

You saw 260 head temps?

Guys some help please. I want to convert my gt2020 to gt350 pre facelift. For this change i will need: 1)front bumper 2)hood 3)fenders 4)radiator support and core 5)headlights and turn signals I will also need to change wiring harness?? Thank you

How much for the mini cooper

How are you going to fix the high inlet air temps (post intercooler)?

Masking the area around the button would avoid scratching with the picking method and the ton of lost time and risk of scratching other interior panels. I got this and returned it immediately. You lose the cool underlit lettering since the new button has solid lettering with just a small light dot on it.

High pressure fuel pump!

I need this but backwards 2019 conversion to 2015 front

Got all the stuff ready to change fluid/filter on my 2021. Went ahead and picked up the B&M pan just to be able to do drain/fill in the future much easier. Also the B&M dipstick, but I may end up passing on that. Back when I had my 2019 I had the dealer do it and it went back 2x after for issues as a result of them overfilling... really has me nervous that I'll have issues with my 2021. Anyway great video! Got a sub. Need to do some more raptor stuff on my channel...been a hot minute.

i am facing the very same issue after taking my car to be fixed my coolant and cv boots were changed. After taking my car back i noticed the error message, start button not responsive etc

which lower arm you using ? e36 or e46?

Have to remove my drivers fender on my 1990 F15 to get at the door hinges. I am 75 and bought the truck new. Big prroblem for an old guy. But have done plaenty to the vehicle so I will give it a go. Thanks

What did you do about the offset for the wheels?

Did you find the problem my car Does The Something I Ready Change spark plugs, VVT coil packs, O2 sensors injectors can’t find a problem

I wanna do this mainly for weight savings. But wondering if maybe adding some cushion to it so that it's not 100% uncomfortable if someone does need to sit in it 😂

Only watched for the thumbnail

did you get it running alright if so what was it

How is the Dorman solenoid holding up?

This fixed my power steering and also traction control started working!

I LOVE what you did ,, with your rear set delete ,, A IDEA go to mustang blanket on line ,, ,, you can get a cheap blanket with a mustang logo on it,, it is 25 dollars to 50.dollars & you could put that in the car , with the rear set delete to have a mustang logo ,, love the video , I hope you like my idea ,

Hold up. When did you get a titan

If you see 1:55 to 1:59 the video is missing frames because you most likely broke the tab on the outer plastic ring and edited it. That's why it all came out with the metal. Not that big a deal. I followed your instructions and the entire housing assembly that holds the lighter and heat warmer buttons came out broken. The critical step missing is minute 1:55. You should "gently" pull out the inner metal cylinder so the plastic ring remains in place. In orders to remove this ring you twist it like a knob to the left or right until a small protruding plastic nub on the ring meets a notch on the housing assembly this will allow the ring to come out easily. The video doesn’t show this so I just pulled hard and broke the ring and the housing. In any case. Thank for the upload.

Hey just a heads up. That plastic plug has a center plug to drain the oil. So you DONT remove the piece with "wings". Just takes a flat blade and you don't eat the oil blowing out all at once

AyeYooooo! That’s my car you used in the thumbnail 😆

Axels ?

I changed my oil at 4400 miles and only 4.5 quarts of the old oil came out. Motor Craft full synthetic was dark black. I switched ultra platinum pennzoil f/s . 2020 raptor with 32400 miles.

Bruh I’d zip tie the frick outta front bolt hole

Very nice 👌

Thanks

This was a sloppy fucking removal

Ive had my engine apart a few times, owned my st since 2012. Here is how you time it correctly. ruclips.net/user/shortsKvkxXjaEwEQ?feature=share

Thank you very much for posting this. Very helpful! Edit : Do you have the link to the sensors and the harness you ordered?

How to connect 2018plus headlights on the 2015

Can you tell me what kind of tool that is you used to uncluck the socket and pry it out?

W

W

only with that works again the speedometer??? i have that issue on my Focus ST 2013

This video helps, thx!