Видео

Thanks. It was just what I needed 👍🏻

Great video. Simple when you know how to do it. Thanks

You absolute legend. Thank you

Excellent. Clear, concise and informative.

I Can't Thank You Enough After 18 Year's And A Door Which Wasn't Shutting Properly And Catching I've Followed The Steps On Your Video And It Shuts Properly No Catching Or Any Problems Sorted ❤✌️

Not all hero's wear capes! Thank you for this video!!

Great video. What RUclips was meant for! I've just solved two issues with mine and I'm having to fight me muscle memory to not slam the door anymore 😂

Great video, just literally saved my day!

Mine is closed and the top and the bottom has a gap half way down the door. Do you know the adjustment I need to do?

My door I believe is badly fitted in the first place. Have done my best with your help.

I tried this but a good whack would not release the clips. Any suggestions?

Thank you, great video! Straight to the point, clear instructions, very helpful

Wow. You won't believe how many videos I watched until I found yours 😅 Thank you so much 👏🏽👏🏽

I've watched this and building up confidence to try. I've only been in the house 2 weeks but I'm getting no response from snagging team. My door is sitting 1mm - 7mm top to bottom :-( I don't know why but this is picking up my Son's profile. I'm a single middle aged lass

Thank you for your excellent video.

Thank you, very helpful, and it explains why my one wasn't erected correctly 🤭😀👍🏼

I could see daylight above my patio door, it had dropped that much. Followed these instructions and it is perfect. Thank you !

👍

Any suggestion if I my door has dropped so much that I cannot open the door to get to the hinge.

Just fixed my door. Nice one mate

I need to take one of these doors off and put it back on again, but i don't know if the door needs unscrewing or if it can be lifted off the hinge. Edit.. it just lifts off 😅

Hello how to replace rubber on pvc door seal double door under the door replacement edging strip

Thanks InfoZhed top bloke! My door latch was catching. Fixed now.

Thanks, mate.

I’ve had a 9 ins cutter and a breaker and core cutter both Titan the breaker / core cutter fell to bits and a toffee hammer would be better ,The 9in cutter very little use and the armature needs replacement .both crap would not buy anything a Titan again.

VEVOR has this one but 2200w for $119USD or a 3500w for $145USD Love mine!

Thank you for a clear instructed video. I have managed to correct my back door and it closes perfectly 😊

Ah man...life saver

What a legend you are, thank you so much for this quick and easy to follow tutorial. We moved in to a new house and have had a gap in the bottom of the door for a month or so now, I’m handy but had no idea how to adjust the door. Watched your tutorial 10 minutes later the door is done and sealed up tight. With winter on its way and temperatures dropping this will save me a fortune over the coming months. Thank you again. Awesome 😃😃😃

Oh it looks so easy but the hinges on my door, although they look virtually the same are just impossible. The cover just will not come off and even after giving it a few hefty clouds with a hammer as shown they will not budge. I have managed to get the door locking by fiddling about with the catches on the striker plate but it is all a bit stiff and clunky. Any ideas?

It's worth saying here that the direction of turn ( clockwise or anticlockwise ) on the allen bolt seems to be dependent on which side the door is hung. In the above example, the door is hung on the right side. In my case, the door is hung on the left side, and it was only by trial and error that I discovered I had been turning the allen bolt the wrong way. I was turning the bolts clockwise, thinking I was tightening them correctly, only to discover that I was making the problem of door-sag / catching worse. One further observation - not all flag hinges need to have a faceplate removed or internal screws loosened. My own hinges have a port allowing direct access to the allen bolt. Anticlockwise rotation of the allen bolts cured my issue, though it took quite a bit of fiddling before I realised there is actually quite a bit of rotation involved - probably 8 or 10 full turns to correct the sag. Since flag hinges seem to vary in their construction, a bit of trial and error might be needed.

Yes it has! A hell of a lot - thanks so much

Really helpful

Fantastic. My French doors wouldn't close properly for ages. They now shut perfectly and lock properly. Excellent work.

Thank you for this, our door has been catching since it was installed 10 years ago!

Love the video! Does anyone happen to know what the gold plate is called where the adjustable screws are? Happen to have french doors with the plates which have disintegrated.

Thank you for this as I had the same issue

Ive spent all day trying to align my door 😞

❤....Pur și simplu , m-a captivat această prezentare . Imagini, plus,sunet -comentariu , mi -au dat curajul , de a incerca și eu. 😮 Caci și eu am probleme cu aceste sisteme mini mecanice . Multumesc pentru toată strădania ta , 😊de a-ți ajuta , prieteni, in acest fel . Multumesc .❤ (Constantin , 06 09 2024)😊

Thank you great video 🙏🏻 just fixed my back door it’s been sticking for ages. I was going to get someone to do it for me. But thanks to your assume instructions I got the tools ⚒️ out & did it myself. Feeling chuffed to bits 😁

Brilliant video thanks for the help😊

Cheers mate that was very helpful,I've now got a straight door thanks trev

Thank you.

This video is still helping people out, thanks. I’ve had a sticking shed door for the last 2-3 years and can now finally fix it thanks to this video. I’d but you a beer if I could

It's my lock, it won't lock when it's closed,but when it's opened. Suddenly happened tonight. Hoping it'll work doing this!

Thank you 🎉

Yes, we've all attempted those dodgy cuts on the mitre saw. Love the simplicity of your digit dodger. I've seen a few much more complicated solutions using big chunks of expensive hardwood, drill presses, and inflator valves...you get the idea. Personally, I like to keep it simple.

Brilliant video

What if you can't open the door

But what if I need to move the door up or down. The screw in the bottom of my flag hinges is the compression adjustment. There’s an opening in the top of the hinge but nothing adjustable underneath it, just a flat piece of metal.