- Видео 14
- Просмотров 33 265
sPOD
Добавлен 24 июл 2013
sPOD is dedicated to creating precision power distribution systems for off-road vehicles, agricultural equipment, utility vehicles, race rigs,12/24-volt equipment… in short, for anything with a battery. We provide power and control on demand for all your accessory and power distribution needs. Our systems are trail rated and race proven!
Our sPOD systems consists of two main components: the switch panel and the solid-state power control module. All you do is wire your positive and negative wire to the power control module, and with one Ethernet cable going to the switch controller - it is really that simple. We back up our systems with a 5-year manufacturer defect warranty.
Our sPOD systems consists of two main components: the switch panel and the solid-state power control module. All you do is wire your positive and negative wire to the power control module, and with one Ethernet cable going to the switch controller - it is really that simple. We back up our systems with a 5-year manufacturer defect warranty.
HD Panel Disassemble
This short video will show you how to remove the HD circuit board from the aluminum housing.
Просмотров: 249
Видео
How to Connect to Bluetooth - sPOD BantamX
Просмотров 4,6 тыс.11 месяцев назад
You got a new phone? Or want to reset your Bluetooth to the #sPOD BantamX. Here is a quick guide. Both the sPOD BantamX and SourceLT units come equipped with built-in Bluetooth technology, giving customers the freedom to program and control their system from any wireless device. This is a quick guide to pairing the sPOD App with your bluetooth device. With a wide range of programming options av...
3rd Gen Raptor sPOD BantamX Install
Просмотров 3 тыс.Год назад
This is the official 2021 3rd Gen Raptor F150 sPOD BantamX The HD vehicle-specific kit for Ford F150 (’21-on) and Ford F-150 Raptor (’'21-on) has been designed specifically to integrate the sPOD HD panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angl...
What is an sPOD Power Control Module and who is it for?
Просмотров 2,8 тыс.Год назад
Our friend Jim Bob walks us through what a sPOD Power Control Module is. sPOD is dedicated to creating precision power distribution systems for off-road vehicles, agricultural equipment, utility vehicles, race rigs,12/24-volt equipment… in short, for anything with a battery. We provide power and control on demand for all your accessory and power distribution needs. Our systems are trail rated a...
sPOD Touchscreen Calibration
Просмотров 8712 года назад
This video will show you the process of calibrating the sPOD Touchscreen display to your finger touch.
sPOD Firmware Restore Procedures
Просмотров 5172 года назад
If for some reason during a firmware update/upgrade was disrupted, this video will show how to recover/restore the firmware.
sPOD Bantam App Multiple Device Selection
Просмотров 1,5 тыс.3 года назад
This is a short video showing the multiple device selection via Bluetooth
SourceLT Operations
Просмотров 2,3 тыс.4 года назад
This is a short video on the operations of the SourceLT.
Touchscreen Calibration
Просмотров 8664 года назад
This video will show you how to calibrate the touchscreens sensitivity and accuracy.
sPOD Mini6 Operations
Просмотров 1,8 тыс.4 года назад
This is a quick overview of the operation and features of the sPOD Mini6 switch controller.
sPOD HD Panel Overview
Просмотров 5 тыс.4 года назад
This video will go over all the functions, programming and pairing options for sPOD's HD control panel. HD CONTROL PANEL Encased in an aluminum billet machined housing, powder coated black, utilizing tactile switches encapsulated in silicone. Silicone Buttons with positive touch feedback. Panel is designed to withstand the harshest environments with all weather conditions considered. Compact in...
sPOD Touchscreen tutorial
Просмотров 8 тыс.6 лет назад
This is a quick video illustrating the functions of the sPOD Touchscreen controller. TOUCHSCREEN CONTROL PANEL Touchscreen Benefits: Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually. Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits. Reduced harness size offers an overal...
How to customize each switch
Просмотров 1,2 тыс.7 лет назад
This video will show you how to program functions to a switch, change the color, change text, add icons and images to the switches.
Solved my problem. Thanks.
Just ordered my 6-gang wireless controller: can anyone explain why the app only seems to cover an 8 switch unit? Will everything straighten itself out once I get everything installed and paired?
Spod customer service is garbage
This was exactly what I was looking for.
Please, add carplay support for the app! that would make it perfect!
The video I have been looking for. This was a huge help now the app is working perfect 🫡
I’ve tried to connect my BantamX numerous times and it will not connect, vehicle running or in accessory mode, battery is showing 14.2v and nothing. 🤷🏼♂️
I got the mini 6 and I haven’t wired anything up but today I got the Bluetooth working and it’s also showing 14.2v. You know what’s that about?
@@808revenge7 I really couldn’t say being you said you haven’t hooked it up yet. I have mine hooked to the battery and also have the Ethernet cable running from the Bantam X and plugged into my HD Switch and even though my Bluetooth shows my SPod connected the HD Swith panel always reads NO DEVICE CONNECTED. I am able to change the colors of the switches but that it. Can’t adjust brightness, program momentary, flash or strobe. I’m currently on my second HD Switch panel and am wondering if it’s an issue with more than the Touchscreen. I am currently waiting since last week for an email response from them regarding the next steps. I’m lost as what else to try.
@@808revenge7 my issue with my sPOD Bantam X ended up being the circuit board itself was bad. I had a new one sent to me overnighted this morning. I installed it. Everything works perfectly now. Just be persistent with the company they have awesome customer support.
Does this save me from wiring a switch through the firewall?
Great stuff guys
I have the mini 6 myself I just installed but since it's a hard wire the lights on the push buttons stay on all the time as well I cannot get it to connect to Bluetooth at all
Aye question, for your mini 6 backlights. When you turn them off using the 2 buttons, when you drive do they turn back on? Mine do and I’m not sure what I did wrong or if that’s normal
Where did you get the mounting plate?
It is included with our kit!
Would the behind the grill lights prevent you from upgrading the intercooler?
Yes, I checked on that today!
Nice clean install. Nice Work.
This is so good!
Hello. How do you connect the Source LT to the iPhone app? After downloading and opening the app, it keeps going on an endless to searching for the unit. It finds it but keeps resetting. Thanks.
I'm also trying to connect it to the Android app and it's doing the same thing.
Thank you! This was very helpful!!
I can't hear the narration. Way to low volume.
best thing I ever did.
What the heck
If I have 2 bantam units, can I set up a group/link that includes switches from both sources?
Hello campNcrawlRs! If you are referring to the "Link" feature that is programmable on the touchscreen/app, then yes switches can be linked between multiple Bantam's. For example: If you change over to screen#3 ( even though you only have 2 Bantams) From here you can create master switches on this screen#3 that will operate switches on screens# 1 and screen# 2. Or you can create master switches on screen# 2 that will control switches on screen# 1. Or master switches on screen# 1 that will control switches on screen# 2 Let us know if this answers your question. Take care the sPOD Team
@@spodofficial thanks for the quick reply. I think that answers my question, but I want to clarify. So, if I want to create a master switch on screen 1 that controls switches on screen 1 AND screen 2, that is doable?
No problem @@campNcrawlR ! Yes this is doable. Play around with it, it's kinda fun linking switches!
@@spodofficial that's fantastic. I'm currently installing and setting up my first unit and decided halfway through install that I could really use a 2nd unit in the bed. The function we're discussing here will make it perfect. Putting together a video to show everyone the install and how it will all work. Thanks for the help!
@@campNcrawlR Awesome! Email or call us any time if you need anything at all! We also some some good advice for remotely installing a second BantamX! Send it to: sales@4x4s-pod.com or call us at: 661-775-7799 Have a great day! -john
Thank You for such a great product
We don’t even get to 2:47 we do everything the manual says and when it says scanning then it will flash the screen with Connecting SourceLT then it will flash the screen where you would hit cancel but it backs out of it before we can click on anything
Hello Brenden, Try rebooting the SourceLT by removing the 2amp fuse for 10 seconds, then putting it back in, start the engine to reinitialize the SourceLT. Next remove the app and reboot your phone. Download the app again. Put the SourceLT into pairing mode again by turning on the DIP switch and then back off. Start the app and wait for a pairing request box to appear. When it does, touch cancel and wait for the 6 pin numbers to appear on your phone in the upper left hand corner by our logo.. The pairing request box will appear again, then put in the 6 numbers and touch pair. Give me a call at the shop and I will go over it with you. 661-775-7799 any time between 8:AM and 5:00PM PST Ask for John Thank you -john
I have a tow truck with amber lights have different flash paterns can change the modes and what model do you have thanks
Sorry for the delay in getting back to you. At this time we do not have a way change the patterns. We usually program one set of lights for flash and another set of lights for strobe. This gives an effect of emergency lighting. Also, depending on which version of the system you have (Bantam or SE, touchscreen or HD controllers) we have a new Pro-Series app that will be released for purchase that will give you the ability to change the strobe patterns for each circuit. We don't have a release date and pricing yet. Email us for more info and let us know which system you have. Send it to: sales@4x4s-pod.com Thank you -john
Awesome product, would definitely love to get down with a Spod system! Happy Holidays from Fort Leonard Wood, MO
John is this the bantam app? I don’t see the add image option on my end.
This is the Bantam app, which is the new app that has all the other apps combined in one! Download it and check it out!
Ok but I don’t see the add image or icon option on the bantam app I just downloaded. When I click customize switch it just shows color, name and the Celsius box.