- Видео 76
- Просмотров 50 358
Progressive Guitar Works
Добавлен 31 дек 2022
Removing a set(glued) electric guitar neck: No steam
Long story short, heat up your skinny thin blade and carefully insert to get rid of glue hold. Haha
Last 2 minutes of video are probably most helpful.
Last 2 minutes of video are probably most helpful.
Просмотров: 515
Видео
Squier Acoustic Revival: The Unexpected Outcome?
Просмотров 218 месяцев назад
Not how I thought the end result would be. Up until the final pieces this things seemed to continue to improve sound and responsiveness. Now? I’m not so sure….it’s better, but very different.
Acoustic Guitar Monstrosities
Просмотров 168 месяцев назад
Highly recommend trying these irreversible mods to a cheap guitar you have. Do it.
Maestro Vibrola Upgrade nbd…
Просмотров 209 месяцев назад
Out with the Duesenbergs. The string tension and response with this is unreal. Transformed the guitar. Did it require drilling into the body? Yes, absolutely it did….. …….6 screws
Squier Acoustic Repaired- Different sound/feel?
Просмотров 689 месяцев назад
Squier Acoustic Repaired- Different sound/feel?
Broken is better? Squier Acoustic Project
Просмотров 299 месяцев назад
Broken is better? Squier Acoustic Project
Lindy Fralin Noiseless P90s - Live Demo+ Noisy :)
Просмотров 29010 месяцев назад
Thanks for watching! Definitely recommend some good headphones for this one. Also, the fun tuning and mistakes are free. noiseless lindy fralin p90s, boosted bridge pickup. 25.scale guitar, ash/plywood body, maple neck 2 tones, two volumes, kill switch and wireless xvive u2 unit. Helix setting : Brit plexi Brit through x2 greenback 20s cabs Different como boosts and reverbs, delays, compression...
Fishman Fluence Install Part 1. FYI DYI-ers Greg Koch P90s
Просмотров 329Год назад
Fishman Fluence Install Part 1. FYI DYI-ers Greg Koch P90s
eBay Guitar Neck Unboxing : Scalloping a guitar neck
Просмотров 97Год назад
eBay Guitar Neck Unboxing : Scalloping a guitar neck
PRS SE Standard 24 demo-ish + in the new space!
Просмотров 224Год назад
PRS SE Standard 24 demo-ish in the new space!
Epiphone Extura Prophecy Demo-ish/sounds
Просмотров 201Год назад
Epiphone Extura Prophecy Demo-ish/sounds
I Broke My Guitar….#ggbo2023 #ggbo23 prototype
Просмотров 76Год назад
I Broke My Guitar….#ggbo2023 #ggbo23 prototype
PRS SE Standard 24 - Live Sound test clip(mistakes included)
Просмотров 111Год назад
PRS SE Standard 24 - Live Sound test clip(mistakes included)
Extreme Guitar Mod #1 Reshaping The Headstock
Просмотров 1,3 тыс.Год назад
Extreme Guitar Mod #1 Reshaping The Headstock
Guitar Finish Repair Hack #1 : Nail Polish!
Просмотров 1,5 тыс.Год назад
Guitar Finish Repair Hack #1 : Nail Polish!
Guitar Unboxing #5! + Channel/Donation Updates
Просмотров 37Год назад
Guitar Unboxing #5! Channel/Donation Updates
Cat photobombs Guitar Disassembly Timelapse
Просмотров 342Год назад
Cat photobombs Guitar Disassembly Timelapse
Grote P90 Hollow Body Demo and Review-ish
Просмотров 2,1 тыс.Год назад
Grote P90 Hollow Body Demo and Review-ish
How can I remove sticker glue from my guitar😢😢
@@ShayanRoy-oz1mx I’d try very carefully using an adhesive remover like goo-gone or soft scrub. Use a wash cloth or plastic scraper to avoid scratches.
I do it with a handsaw. I make do with what I have
Welcome back, excited to see what you make of it
Thanks! Excited to see what it brings.
😘 'PromoSM'
How is the neck on it ? ....any Neck dive?....when you let the neck go does it dive down ?
It had a little neck dive, but not too bad at all.
Nice jazz box bro
Thanks! Check out latest video, it’s the same guitar with Firebird pickups and an vibrola
Put it back, that easy !
I’m certainly hoping to! With some hope of clamps….
thanks for the demo! i don’t regret clicking on this video
Haha absolutely, and thanks so much!
The other end of the wire is smaller
Yes. Though for pre-wired drop in purposes was hoping to avoid soldering.
Stop talking and record yourself doing it
Good info, I was looking for something to upgrade my wildkat... these look interesting. How did it turn out, part 2?
Thanks! And coming soon. Overall, pretty happy with the results.
This is hilarious!!!!
Thanks!
If Linus tech tips decided to take up music instead of computers
Oh yes, let’s go!
What could possible go wrong???!!!111!1!1!🤯🤯🤯
Everyyyyythiiinng!
@@Progressiveguitarworks oh noo 😭😭😭😭🙃
Sounds amazing man, keep it up!!
Thanks so much!
I got an SG with firebird pickups. Really hot at 27k bridge and 16k neck, or there about, plus ceramic magnets. I think they are firebird X leftovers which have 2 blades for poles and a magnet under it. The mags were ceramic and I swapped them for A5 (easy) and it really brought the guitar into a more dynamic range. I also tried A2, A3 and A4 which all made them a bit limp. Original firebird pickups have magnets where usually you'd fine the pole pieces. I would leave those 500k pots in there. Buckers get too dark. Unless you find yourself constantly turning down the tone then the pots are fine. The best thing you can do for the sound is tune the damn thing and get a real amp. Rock on, bro.
Thanks!! And I agree. I have set up a whole new patch for it with muuuuch better dialed in tones.
*Promosm* 🤩
It was a mistake clicking on this video
Bro looks majestic...
Haha!
Okay, sir. Will that complete your order?
No no, buyer’s fatigue always leaves it unpurchased.
ouch!
It happens so fast!
What of those two colors would u recomend ?
I personally am really enjoying the satin black.
The satin black has a nice mid boost!
Did this in the opposite route after getting used to flat wounds, can’t play any rounds thinner than 10-52 lol
Haha woah! I’ve heard flat wound sound cool but have never tried. I played regular tens the other day but they felt very strange!
@@Progressiveguitarworks bending feels tougher because not only is there more tension than rounds of the same gauge, the note doesnt change as much as rounds. other than that i say give em a shot if you have a guitar around you mostly use for old school (pre 70s) stuff
I’m going to have to try them out. Maybe on a slide build!
😂
I have to rewrite it haha😂
It's a sweet spot already. Don't ruin it
Must resist the temptation…
Love the “I’m just gonna do it” attitude 🎸
Oh yeah! I just need the, “Imma finish it attitude “sometimes too….
Thats the best way to make progress. I have a hard time procrastinating
PGW theme: “It started out as a fix, how did it end up like this? It was only a fix, it was only A FIX…”
Listen, the accuracy of this suggests you know something I don’t……..
I have no idea what this is, but your beard is amazing
Haha thanks!
Awesome stuff! Where are these on eBay?
Hey thanks! They will be up in a week or so. Still doing some finish repairs etc. I’ll put links to them once they are up.
Makes everything lighter I suppose. Nice playing.
Hey thank! And there’s something about a little extra control of the vibrato and being “in tune” that is really nice
Could you please donate me
Nice keep it up!!
Hey thanks so much! Will do.
Ok Conor Mcelhenney
Haha who is that?
@@Progressiveguitarworks the baby of Conor mcgreggor and Rob mcelhenney
@@jasong7373 I’ll take it!
@@jasong7373 i can do an Irish accent……….
Woah ….this dude looks exactly like me… high weirdness
Hah!
sell it on e bay with description “special headless”
Yeeeeeessss!
I dont think this is what a headless guitar usually looks like
Haha not normally. But, it could be the new thing
Best way to test if your locking tuners work
Right? New benchmark
How
Magic apparently
Damn looks like a shipping issue
Probably! Just unboxed it and now onto repairs!
Its got a pretty finish
I agree. Love the black
Well that was unexpected
Right?? Locking nut for the win
Hey thanks!
Nice looking guitar and even better cat!
Thank you kindly!
This is.... not good :(, oke reparing or new design ,but quality ? hmm
Haha it can definitely look rough to start. The next few passes in an upcoming video look better.
Where did this kit come from? LP kit with Jimmy Page wiring and a whammy bar...sorta rare. And...scalloped frets? The back also appears to have some comfort cut, neck sculpting? It might have some warts but they also seem like things you can overcome and still have something that youd otherwise just not be able to buy. I've been scouring the net trying to put together a similar build plan, materials etc, and Ive determined it would cost more than buying a Gibson...but it would have what Gibson doesnt sell and what I want. Seems a bit tragic to write this off as a loss. Your top paint, btw, is really tits.
Hey thanks! Yes, I ended up sanding the contours and filing the scallops in. And you are correct, all the parts i basically had to source. They total about $750 right now, including the body, are can be sold separately if needed. It’s a good learning experience. I found the neck and body on eBay.
My cousins building basically the same exact guitar
That’s great! How’s it going so far?
Sweet ! Coming along nicely 😃
Hey Thanks!!!! Welcome!
Think a blue and white burst( if you have an airbrush) I feel it adds a lot of personality too the guitar and because it would be you doing it (I’m assuming) you’ll know it better than anyone ever could
Thanks for the recommendation! I didn’t even think about a burst with white. I’ll have to look and see how those turn out!
DAMN homie wants his axe to live 🤘
Yep!
That neck is badly bowed and doesn’t seem to have a truss rod. Good luck making it playable. I would welcome viewing the process.
Those areas do look pretty rough. I’m looking for tackling to and seeing how far we can go with getting it playable/useable! Thanks for checking out my videos!