Видео

Seems like it would work pretty well for small yards like you mentioned....and you can get larger batteries too if you want a longer run time. The nice thing with the cordless stuff is you don't have to drag an extension cord all over your yard. I tried a cordless lawnmower and was not impressed with it at all...and it was not a cheap one either, it was an Ego...that thing didn't have much power and it would randomly shut itself off on rough ground....wasted $800 on that thing, would never buy another cordless lawnmower....maybe the string trimmer, a hedge trimmer, and chainsaw, but never again would I waste the money on a cordless lawnmower.

I got same color 99 bucks parking lot sale ..I bled it b4 I used it ..works great

Man i wish insaw this yesterday. I just bought the same pump from auto zone 😂

I didn't even know they sold these anymore. Buy the walmart ones and buy some o-ring assortment because you're going to have to change the orings at least after 5 uses. Buy some jack hydraulic oil too. Trolley jacks are made by cheap chinese parts no matter where you buy yours from. Like I said, buy some assorted orings HNBR and/or nitrate (nbr) and gets some hydraulic jack oil (from your local autoparts store). Also I pulled the trigger and got a 20 inch 3T quick pump jack. They're currently around $130 to $250 bucks, but I got one for $80 bucks by luck. I can lift the whole front-end of the car in about 25 pumps o a lift height of +20 inches. I use ramps and now I have a jack just incase the wooden car ramps miraculously collapse for some "god hates me reason."

I got this jack a year ago. Only use it for small compact vehicles. I don’t have a garage so this jack works just fine for me. I’ve probably used it a 12 times and it’s not amazing but it’s better than what comes in ur vehicle with the spare tire. I would get a better one but I don’t use it much to justify getting a better one.

I got it works great 🤞been holding one side rear for 2 days now got 3 ton jack stands to

I've had a 4ton daytona harbor freight jack for 10 years, and it hasn't failed me yet. I'm pretty sure it's just the 4 ton version of yours in orange. Mine didn't need oil though, least not that I was aware.

i have owned 4 of these jacks and they all keep breaking where the handle pushes in the hydraulics, there is a small metal clip there that bends and makes the jack fail, be careful of that and if it does bend you can fix it just takes some patients. i stopped buying them and bought a 1.5 ton aluminum jack for $99 that came with a few jack stands, good jack for a tire change or oil change. appreciate the video :)

I think you would be better served if you had a testosterone level check.

if someone owns a hydraulic jack and doesn't have any fluid on hand then they have no business owning a hydraulic jack. might want to do a follow up on bleeding the jack.

❤❤❤

My man havin fun with that Jack, that’s me for reals too

Also that vacuum breaker white funny looking gasket doesn't set on top. It slips just under the top into the groove, then a paper like gasket goes on top of that

Thank you for the comment 😊 I'm not an everyday plumber and on a budget so pipe wrench it is. the gasket was missing so I taped the threads worked out great still no leaks😂

I got the aluminum "racing" jack. Sits outside for years, never rebuilt it and still works when I need it.

please buy a fixture wrench 😭also you don't need tape on the vacuum breaker nut cause the rubber and the paper are your gasket. But other than that great vid!

BS u can even mix them lol

Delta Has lifetime warranty

there are free if you just contact Delta Faucets

Delta will send you the part for free if y are the original owner.

One added note: When reassembling the valve, back out the valve stem fully (as if you were turning on the water). That way there is no risk of damaging the valve seat when you reassemble the valve. Also, most hardware stores sell assortment packs of faucet seat gaskets and washers.

Do you have to put a clear coat over the top or is the appliance paint shiny?

That’s really nice how many qrts did you use on the hole counter top?

For a kitchen though? People put food on the counter, is the paint non toxic?

how have the lights held up?

Very clear instructions and video. Thank you very much!

So many suspension rods on Amazon how do you find the right one. My washer is just like your but without an adjatater

They don’t come off like that

thank you :)

FYI: Battery is not free, (at least not here in CA). $39. + tax $43. If U replace with a generic battery purchased from other reseller (Amazon or local battery company) & it somehow damages your panel you're SOL. Voids warranty on panel. You pay to replace. If ADT battery is faulty they replace everything for free.

The paint applied in the bathroom sink bowl cracked. Can I wet sand it and apply paint again?

Did you rip out the whole vanity just to replace the faucet?

Got video on changing the valve? Thats my issues is i turn the hot water but still leaking or wont shut all the way

Amazing! I ordered some replacement headlights and this video was perfect

Thank you..$10 Amazon

If you call delta they will send you all the parts for free. Delta has a lifetime warranty on all their faucets. Good luck

$30? It’s $140 for the 4 spring parts online. And this isn’t easy ok but you can get a handy person to do it but it will cost about $300 with the parts and labor. Still cheaper than buying a new machine.

My vanity is old had a 4 inch staight crack in it. should I use bondo first to fill in this crack or will this do it. The crack is not wide and does not go all the way through.

Very helpful. Is it necessary to stand the unit up before connecting the springs? Seems like it might be a little bit easier when it's lying on its side.

Can you link to the video

Can you put that over rusty spots on the sides of a white refrigerator?

How can i fix my vanity in my restroon my kid grab the pummie rock and scratch it is the size of a credit card ouch!😢 it looks like its been repainted is white ,,,how can i fix it help im a diy..gal😊

Most thorough repair vid on this subject and no fat fingers in front of the camera! Thank you

Recommended oil for that year is 5W30 , like my 2010 Nissan Xterra. Only oil brand I don’t use is Penzoil. Had issues way back in my teen years. Gummed up back then 80’s. Never trusted it after that.

where did you find headlights with left/right adjustments?

On a repair video for a whirlpool that looks exactly like this kenmore, there are 4 springs that are attached at the top of the drum, and they attach to the 4 suspension rods. I wonder if that is why everyone is having trouble with banging after a few weeks of replacing the suspension rods. My own washer is missing them as well. I didn't see yours have them either. You can see at the top for corners of the tub there is even a place to hook a spring onto. Quite peculiar. 🤔

How did it stand the test of time against the tub and tile? Looking to redo mine which is very similar

14mm this is a metric vehicle!! Omg 🤦‍♂️

Just did this and so far so good. Still a good shaking going on but not like how it was trying to escape my house lol. We will see how long it last. Thanks for the video helped big time!

The 880 is awesome. That scope, however... it's gotta go