Видео

0:50 two tits?

Awesome It would be great if you connect Alexa. And with a command: Alexa, turn on the boiler/tank, the water star running and you can put that stop after 20-30 minutes automatically after you said that command, so you don’t have to go every time to the app to turn it off

That’s a great explanation, Mr. Garrison

Thank you for posting this video, is it also available in braille?

Great mod. Researching Aliners atm and would definitely do this.

Nice video....Great idea for the circulation pump. In our situation part of the house was serviced by the circulation pump but not the kitchen (where we mostly need it far more often). I put this on the most distant sink and poof....the other 2 sinks that are inline are hot immediately as well. Our circulation pump has a timer or you can let the self-learning program do the job. For the most part the self-learning is working well enough for now. We unplug both the circulation pump and turn off the breaker when we are gone for an extended period.

I just did mine today in about 90 minutes. It’s kind of a pain but I was able to remove everything without breaking the clips. Once you remove the nuts that hold the spoiler you can get a piece of 1x2 or something thin to slide under the spoiler from each side and just shift the spoiler around til each clip pops loose. Again I had this done in 90 minutes and could likely do it in 30 minutes next time.

I just did mine today in about 90 minutes. It’s kind of a pain but I was able to remove everything without breaking the clips. Once you remove the nuts that hold the spoiler you can get a piece of 1x2 or something thin to slide under the spoiler from each side and just shift the spoiler around til each clip pops loose. Again I had this done in 90 minutes and could likely do it in 30 minutes next time.

Great. Thanks for sharing. Where should we place the circulation pump? Cold pipe before entering the tankless heater?

Will a radiant barrier work on a house without ridge vents, as mine only has gable vents?

Any mold?

Half the cost of foam is expensive foil! Too much trash talkin spray foam when ya should just be promoting yours. Smh

"Water heater", not "hot water heater". You're not heating hot water.

Wow, I've watched dozens of videos on attic radiant barrier and this is by far the most useful and clear. Thank you. I wish Rod was in Southern California.

how does it push against 62# of street pressure on the cold side. doesnt make sense to me

Bab video

Holy smokes amazing job! I am installing an AC in my Aliner now. I might try this!

Aliner design and engineering folks, when can we see some of these innovative AC improvements in production?

Finished mine today and it’s 2pm now and noticeably cooler inside.

damm tHanK U best video out on thiSim going threw thiS now lookS like alot of work

can you adjust the on temp in bridge valve? Or what is it set at?

This was very helpful. Did you see savings on your energy bill? How much as a percentage or in actual dollars?

I'm definitely gonna share this

2012 mtk help

dude you're gonna kill yourself with galvanized metal. Look up max temp for that type of metal.

What is Mil on the barrier? Does it matter how thick it is?

Does the pump need to run continuously while using hot water?

Hi, when the bridge valve reached target temperature, then the circulation pump has no output, then what will happen with the discharge pressure and pump performance? Thank you!

The EXACT same thing happened to me in the car wash! I heard a loud noise, looked fir damage, never saw the cover missing until a few weeks later! Wow after watching your video, I'm tempted to pay dealer to do it! Now I know why their quote was high. Unfortunately, I already bought the part, though. Thank you SO MUCH for making this video to let us know what we will encounter.

what if your house dosent have a ridge vent or soffits but only gables

Question. If the pump is on, I.e. the timer is set to have the pump on, and the water is above the 95 degree threshold for the crossover/bridge valve to operate, does the pump run even though there is no water flowing?

This is exactly what happened to my 2017 MKX the car wash ripped it off and I'm glad you took the time to make this video, I'll try and replace if I can find the light. Thanks

Wd40 is not a lubricant

Do you run into error codes with your tankless with this setup? I keep hearing other YT videos of ppl saying dont do it unless theres a tankess water heater with built in and can run the correct mode.

Thank you so much for posting this!!! This exact same thing happened to us we actually caught it and thought it was going to be an easy change so we didn’t ask the car wash to pay for the installation because they were so nice and paying for the 200 and something dollar tail light replacement🙄 We waited for a while before we got around to doing it and figured out we could not freaking do it. It was too late to go back to the car wash and as for installation money. Nothing I mean nothing is online. we even ordered Haynes manuals, and there was nothing in there either!! Holy shit! You’re a freaking rockstar !!!😃😃😃😃✌️

awesome job👍 i'm going to do the same thing to mine during the summer. thanks again!👌

Esse material e aço galvanizado???

O metal não deforma com o calor do forno?

I replaced my inducer motor and blower wheel because of bearing noise. Got them separately on Amazon. Now I got a lot of orange flame. Flame looks like crap. It was nice and blue before. Also seems like the flames are not being pulled/stretch enough inside the exchanger because the flames are not a narrow as before. Maybe didn't adjust the fan blade on the motor shaft far enough out? Maybe the new cheap Amazon blower wheel sucks? I got a nanometer, but haven't checked the vacuum on the inducer yet. Not sure if the manual has a spec or not.

Is it true this will break your roof by overheating it?

Do you necessarily need the recirculation pump to go with the bridge valves?

Will the pump turn on once the sink is turned on or only if you turn the app on ?

With regards to the Bridge Value: Wouldn’t this valve build pressure on the cold water pipes? Eventually leading to leaks?

I have some questions: How can you push water from the hotline into the cold line, when the cold water line is coming at pressure from the utility provider? - Does this setup mean that your cold water line isn't "cold" anymore?

Bless you, Paul!! You saved my day!! I carry a tray with wife’s hc scooter and so I use a rexing dashcam M2 with rear camera 🎥 that I mount top of hatch to view backing area with a higher view over scooter. I was eager to remove 3rd light - NOT NOW! Again - MANY MANY THANKS!

I needed this to be "On Demand". What is the name of the smart plug and the model?

Thank you!!!!!

Funny part at 4 minute mark, laughing so hard at whom ever was gonna get some hot water had to wait for your great video to end to be able to finish their shower. The things we won't do to make a good video.

Since I have a water softener system I need to figure out how to do this and not have soft water back into the softener.

Good video but you don't have to put the pump on a timer they're designed to run all the time. I've had mine running every day for the last four or five years and it is still running.