Видео

How to clear error 52

Do you apply these settings on all 3 inverters? Or only on the Master?

Thanks. Please can program 50 be set independently on the inverters in a parallel setup? I wish to set the "AC output time" for the slaves different from that of the master. Likewise, can program 4 (power saving mode) be set independently? I hope you understood what I meant.

Hi Am having issues with my growatt battery it starts to change and after ten minutes it shows red and switch off

Chiedo aiuto: Non funziona il bilanciamento dei carichi della mia Thor_07ASP Imposto la modalità Fast. Nelle Impostazioni: Impostazione della stazione EV: corrente uscita massima dal palo elettrico (a): 18 (che equivale a 4kw circa). Bilanciamento del carico: abilito e imposto un nuovo periodo (ogni giorno, tutto il giorno), massima potenza importata dalla rete: 4,5kw (ho il contatore da 5kw). Però, se inizio la carica a 4kw (a cui si aggiungono consumi istantanei di casa di circa 0,5kw) e dopo accendo il forno, la pinza amperometrica della colonnina segna 6kw (l'ho lasciato per 2 minuti e poi ho spento). Come mai???😭 (versione firmware THOR_07AS-V4.2.13-20230714)

Chiedo aiuto: Non funziona il bilanciamento dei carichi della mia Thor_07ASP Imposto la modalità Fast. Nelle Impostazioni: Impostazione della stazione EV: corrente uscita massima dal palo elettrico (a): 18 (che equivale a 4kw circa). Bilanciamento del carico: abilito e imposto un nuovo periodo (ogni giorno, tutto il giorno), massima potenza importata dalla rete: 4,5kw (ho il contatore da 5kw). Però, se inizio la carica a 4kw (a cui si aggiungono consumi istantanei di casa di circa 0,5kw) e dopo accendo il forno, la pinza amperometrica della colonnina segna 6kw (l'ho lasciato per 2 minuti e poi ho spento). Come mai???😭 (versione firmware THOR_07AS-V4.2.13-20230714)

Thank you very much. I have two Growatt ES 6000 plus, I want to put them in parallel now I wonder if I can connect the BMS to which Growatt?. Thank you in advance

Thank you very much. I have two Growatt ES 6000 plus, I want to put them in parallel now I wonder if I can connect the BMS to which Growatt?. Thank you in advance

Hello Sir, when we put 3 Growatt in parallel. In which Growatt should we put the BMS as long as we do not have a Hub

Hello Sir, when we put 3 Growatt in parallel. In which Growatt should we put the BMS as long as we do not have a Hub

Required a 5 kw 3 phase solar inverter send me contact details

Hi, I have a question... I have a 3-phase 240 V system in my home and two Growatt SPF 6000+ inverters. Can I use those on the 2 phases of my system leaving the 3rd phase intact? I have seen diagrams for seting up and connecting 3 inverters (one on each phase) but no only 2. Would that cause any problems? Thank you!

Тоя белия прелюд ми 'ареса най-много!

Can you limit the %charging (ex. limit to 80%) from the growatt app?

hello, I have an identical installation with 3 inverters 5 kW mounted in parallel with a total single-phase output of 45 kw but I have a three-phase public network subscription of 15A per phase, I would like to know if it is possible to make the network injection of the 3 phases with one phase per inverter

Please can I parrelle SPH 10000 growatts?

C'est génial et bon boulot ❤ mais 6 convertisseur en parallèle comment faire cet programmation.

Setting 23? When you are using single phase with 3 inverters in parallel the manual says to set it to PAL instead of SIG. But then it gives me a fault. What is your opinion? I am using exactly the same combination as your system...

Добра работа!

Hello, super video ! You have 4 ROSEN SOLAR batteries and what are the 3 others? Thanks. Jerome.

Where can i get those busbars ?

Sir what is the Max. PV input current of this inverter ?

Браво! Много полезно видео!

Very useful and well done. Thank you

Thanks for your efforts. You are doing a good job explaining things, especially considering English is not your native language. You are easy to understand. Greetings from Australia. I have 2 of those inverters, still in their boxes. The cost of batteries is the real killer!

Hi, can you tell me how to set up BMS protocol with lifepo4 baterry?

Nice video, well done and beautifully explained about the good practices and also the bad ones. Keep the work going on for your off grid setup, by the way how much battery capacity are you using?

I need ur complete video of the installation of the 3 grow watt inverter

Би ли пуснал една снимка на буксата с 3-те кабелчета и в кой порт я вкарваш на инвертора. BMS или RS-485

Are you happy with the charger? Is it any good?

Інформації нуль... Щось якось і через щось Клятий інвертор не хоче з батареєю працювати... Хоч би десь знайти інформацію про режими пункта 36...

Show how you connect it to the battery! All I learned is cut your cable into and hook it to the inverter and battery.

I am pretty sure you only connect to master of course is good to connect the 3 just because you. Don’t need to worry about startup order

Good morning, Sir, I am contacting you because I am really lost in the commissioning of a Growatt Thor 22 as-p... I am an engineer in Belgium and I have a small renewable energy company! I have no answer from the Growatt technical department. I have already spent hours on ShinePhone and ShineTools but I cannot add and make the commissioning of this E-V Charger! LinkdIn is my last hope to contact Growatt and try to get help... I hope you can help me or direct me to someone who can help me. In advance I would like to thank you. Sincerely yours.

Can you show cable pin out?

Great info. I just need to know whats the pin order 4th pin CAN H , 5th pin CAN L 6th pin Ground in the Growatt 5000es side. Is ground pin matters? My battery ground pins are PIN 2, PIN 7 CAN L and CAN H are correctly aligned

Can you explain how you connected 3 inverters to 4 batteries? Someone told me: Growatt SPF 5000 ES in parallel its only need to connect the main inverter to batteries in parallel. The Growatt SPF 5000 ES parallel cable will get the needed data from the slave inverters.

how did you connect the pins in the plug on both sides?

Do you have the link for the CT meter?

Hello, I got the Thor EV charger like yours now. My question is what is the spec of the CT that you use?

Hi, nice video. The clam you are showing on the minute 3:49 to check the power consume from the house, come by default with the charger, or do you need to buy that apart?can you send me the model of that?

Hi

Hi, thanks for your videos. The EC charger works without wifi? This have Bluetooth too? I need to install the charger in a parking with no internet. Regards.

Thanks for the video! Is it possible to setup 3-phase system from the same 3 growatt inverters?

Zero Information here.

What order in the cable then aka Color order? Close picture on the cable head to see the colour order= Null modem? RJ45 head Write colour to the left nr2 colour etc due to missing the cable !

Hi, how does PV linkage work? Also load balancing, did it happen to shut down your fuzes?

Small hint: Energy cannot be saved. So if I want to boil my water, I always have to use the same amount of energy for one liter. Christian's method relies on a longer period of time with less power in order to be able to use the power provided by the PV as efficiently as possible - so consumption peaks are intercepted. In the end, the energy consumption should even be (slightly) higher due to the interposition of the dimmer, but it doesn't matter, since more efficient coverage by the PV system and therefore better use of the self-generated energy .......... .... 🌞 ................ Solar Mini PV Tip ... Winter & Camping. A boiler and other hungry electricity consumers can be infinitely dimmed using the "5000W dimmer". Ebay €7. I run 5 dimmers in parallel on an 850W inverter. Kettle 2.2KW at 150W runs 12 hours a day, so the water is always hot. The room is also nicely heated. 2.5KW washing machine runs in parallel with dimmed to 200...400W. Iron, dishwasher, oven, electric heater, coffee machine, all internal heating are throttled with me. Videos on my channel ruclips.net/video/eC2olbCBhh0/видео.html The inverter stays cool, quiet and the MOSFETs + (battery) remain intact because no extreme current peaks arrive at the inverter. Now every Mini PV Inverter is enough to sell large devices. So, with the dimmer, all internal heaters/devices can be converted into base load devices that stay almost permanently ON, drawing very little current directly from the PV. With a wattmeter / energy cost measuring device you can then measure this perfectly in order to optimally set the dimmer. With the dimmer, self-sufficiency will now increase from 20% to almost 95% in summer, which means a huge breakthrough. The prerequisite is that you have at least a small balcony power station, and you don’t need an expensive battery either. Example of a kettle: Without a dimmer, the 2500W - 600W PV system needs = 1900W, which you have to pay more for. If I turn the kettle down to 600W with a dimmer, then every weak PV system can now supply each consumer independently and independently, because the 2500W kettle becomes a 600W kettle thanks to the dimmer. Magic... The 2000W e-heater becomes a 500W e-heater with a dimmer, which can run 12 hours a day free of charge via PV. ruclips.net/video/QbLWDbJi6ew/видео.html . The 4000W oven is also tamed. Not the solar systems have to grow, but the consumers just have to drop by 75%, which is sooo easy with the dimmer. are you convinced now I have already switched my entire household to dimmers. Please have a look at my channel. LG, Christian ................................

Hello: I have 16 model: 3.2 v 280 Ah batteries along with “Overkill Solar” battery management system. I have cut the wood that I will be using to construct the bottom of my wooden frame to hold all 16 batteries. I would like to purchase battery tape to provide support to all 16 batteries and to secure the battery terminals. After I’ve connected each one of the BMS leads to the positive terminals which includes the black lead to the negative terminal and the red lead to the positive terminal, I’m not sure what battery wires and devices should I use to connect two Growatts 3,000 kilo watt inverters to the 16 batteries. Would you do a video on this or provide an answer on this? Regards, Gabriel L.

Those t-shirt change faster than the car :D