- Видео 42
- Просмотров 153 221
Warhead Industries
Добавлен 12 ноя 2020
Airsoft parts and upgrades manufacturer based in China. Website with European and United States Distribution can be found at www.warheadindustries.com or find us on warheadindustires. We make all manner of high quality airsoft upgrade parts and tech.
Warhead is part of a Chinese registered company (KO Venture Technologies) with staff hailing from Europe , UK , Australia and China. The manufacturing facility is based in Wuxi China in the Jiangsu province approximately 200 km from Shanghai.
We have English , German , French and Chinese speaking staff on site who are available to discuss the needs and particulars of our products.We can distribute directly from the UK in Europe and from Silicon Valley in the USA as we have distribution hubs located in these countries.
.
Warhead is part of a Chinese registered company (KO Venture Technologies) with staff hailing from Europe , UK , Australia and China. The manufacturing facility is based in Wuxi China in the Jiangsu province approximately 200 km from Shanghai.
We have English , German , French and Chinese speaking staff on site who are available to discuss the needs and particulars of our products.We can distribute directly from the UK in Europe and from Silicon Valley in the USA as we have distribution hubs located in these countries.
.
Видео
Reviving & Poorly Specna MK18 With A Warhead Motor!
Просмотров 404Месяц назад
Ripped from my channel & some nice "bleeps" inserted. 1.09j, .28g, Perun Hybrid V2 Pro, Warhead Base 35k, 7.4v 1300mah LiPo
Krytac P-90 with Warhead Base 35k Brushless Motor
Просмотров 5563 месяца назад
Krytac P-90 with Warhead Base 35k Brushless Motor
Warhead 35k Cyma MP5K 7.4v, 9.9v & 11.1v test
Просмотров 1,4 тыс.4 месяца назад
Warhead 35k Cyma MP5K 7.4v, 9.9v & 11.1v test
Tokyo Marui Aug High Cycle on 7.4v
Просмотров 6396 месяцев назад
This isn't about ROF, it's about all around performance & reliability.
Krytac Vector with Warhead Ultra CNC Black
Просмотров 7348 месяцев назад
Krytac Vector with Warhead Ultra CNC Black
Warhead CNC Black Ultra - Double Bell 416
Просмотров 1,1 тыс.9 месяцев назад
Warhead CNC Black Ultra - Double Bell 416
A&K PKM Gearbox With Warhead Base 27K
Просмотров 8339 месяцев назад
A&K PKM Gearbox With Warhead Base 27K
The Importance Of Fitting Your Motor Correctly
Просмотров 1,1 тыс.11 месяцев назад
The Importance Of Fitting Your Motor Correctly
VFC MCX with Warhead CNC Black Standard Speed
Просмотров 1,6 тыс.Год назад
VFC MCX with Warhead CNC Black Standard Speed
Perun For Vector & Warhead Motor - Friends?
Просмотров 2,4 тыс.Год назад
Perun For Vector & Warhead Motor - Friends?
Choosing The Correct Motor For Your Build
Просмотров 12 тыс.Год назад
Choosing The Correct Motor For Your Build
Which Grub Screw Size & Which Threadlock?
Просмотров 917Год назад
Which Grub Screw Size & Which Threadlock?
Krytac Barrett REC7 w/ Warhead Ronin 45k
Просмотров 10 тыс.Год назад
Krytac Barrett REC7 w/ Warhead Ronin 45k
Krytac Trident on 7.4v Before & After Warhead Motor
Просмотров 7 тыс.Год назад
Krytac Trident on 7.4v Before & After Warhead Motor
is this negativeairsoft? lol
I dunno, is you Neg?
Yeah.... duh.....
That’s made my mind up! The 35K it is. With my LCT AK, its stock, would I need a mosfet to run it with an 11.1?
I know it’s late to comment but my ssr9 dsg motor has broke and I don’t know what motor to put into it , it’s using a gate aster v2 m100 spring and 11.1v lipo.Any suggestions???
What piston and piston head did u use
hey man, i have recently purchased a kyrtac spr and it shoots very nice stock, looking for some upgrades because why not lol. what brand of spring did you put in? linear or non linear? did you use a weaker spring to work well with the upgraded motor or?.. what brand of piston did you use? You didn't change the piston head? air nozzle? brass cylinder? how difficult was it to install that warhead? krytacs make everything difficult. let me know.
Mine were the fixed tabs and it did fall off
Not everyone needs a hand held a10, I think that rate of fire is more than enough!
bro if i could take my gun apart with out breaking it
Anyone found a supplier of this screws ?
Ebay bud
What happens when the trigger doesn't work and is stuck? I have m4 pdw... I used it and suddenly it got stuck, what can I do about it?
Now put a 11.1V in it :)
I have a question i Have krtyac Rec7 barret model and i want to buy the warhead 50krpm but which battery should i use?? Can i use 11.1?? Or 7.4?? And which gear set is good 13:1?? Or 18:1 can you please help me with my question👍🏻
Li-fe is kinda hard to get in my country. I usually just put those 200:100 gear hahaahha
Scary sound effect?
Is the short stroking necessary here? I have seen another warhead build with LCT AK and no short stroking was done on that one. I am planning to use Warhead base 35K on 18:1 M110 or M120 depending on which field i'm going. I usually have 7.4V lipo, but I do carry 11.1 too sometimes. Gun is semi only so i don't care about ROF, only trigger response
No it's snappy enough I keep my parun stock with a warhead standerd speed with 7.4 titan and it's got a respectable snap in semi nothing to wild like it's perfect as it is
Many men, many many many men
Stealing videos now?
From who?
Yeah, from who? Luke do you know?
@@NegativeAirsoftTech Nah, This video is only on this cannel isn't it?
@@warheadindustries2656 Yup! How's your wife?
@@NegativeAirsoftTech She's fine.
is that G3 AEG?
G&P 249
Or if you are Limited for space can put a small pick inside the whole of the tab
🙌
wanna ask about warhead basics motors, is the lower RPM means better torgue?
Nope, not with these
No mosfets?
Trident already has a mosfet.
I had no idea I would be watching negative airsoft... totally messed me up for a second. 🤣🤣
Is this Negative Airsoft?
wich part have you installed? (model-manufacturer) thank you
My standard is double that 🤦🏻😂
Depends on your build, this customers AEG has a proprietary box mag that won't stand up to high ROF.
Considering the 7.4 that’s good fire rate
woooooooooooow, do you want a medal? little award ceremony perhaps? with ur lame ass
what would bethe expected rps for an m170 spring ssg 18:1 11.1 2200mah 60-120c
My krytak rod unmodified is 2 times as fast as yours with a warhead I wonder why? I run a titan 11.1
Because I was showing the difference between a stock motor & a warhead on 7.4v
@@warheadindustries2656 ohhhhh I see
@offroadcountryboy_809 I put a perun v2 with a warhead standard speed so it's 20k on 7.4 and it's git a respectable response on semi and full auto isent scary
hi guys. i using this motor in weapon with procesor leviathan . and now Im not sure whats right in setup menu, DC or AC motor? thanks for info
Is there an alternative to that particular loctite as it seems hard to get hold of without paying stupid money.
I have tried this and it ended up bricking my aster and frying it so I must have done something wrong can you possibly make a walk through video how to properly pair the black warhead to the gate titan please I really don’t want to ruin a another motor and trigger board
Power is supplied from the aster to the motor, it can't kill the aster.
Массажёр.
Love how you chose a Pungent Stench song for the background song, Cheers!
I really want to just buy this with pinion pre installed. (Ill buy shs gears extra myself if needed)
Warhead do all your motor fit krytacs?
clean
Gear ratio and spring?
can i just swap my motor without re-shimming and short stroking? was trying to do DMR build with MS135 Prometheus spring and stock everything else.
responded to everyone else lol
Is the grub screw 2.4mm x 2.4mm (length and diameter)
yup
I just found this channel after watching a bunch of videos from some really negative guy that swears a lot. I guess you're good too.
which geas were those to pull m160?
PME lover <3
Thanks for the info, keep up the great work mate 👍
If i install a warhead brushless motor inside my stock g&g gc16 warthog,(chronoing at about 90 m/s with 0.25g) will something break?
No, just be sure to select the relevant speed & type, in your case a 27k would be fine - G&G gears are rather good.
@@warheadindustries2656 all right thanks for the answer!
🤘🏼😎
I was wondering about the gears too and by how much they were shortstroked. Got the same motor but after full auto for a while it stops feeding gradually... And that is running on 7.4 lipo
Hey brotha im a Airsoft Tech as well! If everything is still functioning as normal but its not feeding as well, check to see if your tappet plate is worn out. Check out The Real Deal tappet plate springs, he makes stronger versions of them to help pull the tappet plate back faster to help with feeding as well as FPS. You can also add a delayer chip to help the tappet plate move farther back and smoother to help with feeding. Hope this helps a bit!
Awsome combo a v2 and a warhead and yess fullauto and burst will be lacking but semi is supper smooth and fast even with a 7.4 titan worth the money to install a warhead ❤
What are the gears ?
Standard krytac gears
Hi✌️ If i play semi or binäry mode. With using 16:1-13 tooth gears. Better buy 27k base warhead or 35k base? Thx Regard
If it were done to an arcturus vityaz would the result be similar? 🤔 And would you suggest a mosfet for said config?
If a very basic one were used, no AB.
@@warheadindustries2656 much appreciated thank you