Видео

I totally agree. I got mine to hopefully diminish some scratches. My microfibre cloth I got was rubbish to be honest. 🤔

Thanks. I always use NGK spark plugs. 😎

@@KyushaStyleTuning what variant of ngk plug would you remember? Got a project car came with bosch ones

@@Nagfan09 just the basic standard jobs nothing special it’s my daily so doesn’t get tracked or raced. 😜

@@KyushaStyleTuning Cool thanks...keep the vids coming anyway,will help me do small jobs on my own one!

No problem. Will do. Rust repair next 😬

😃

😃

It could be? Might be worth a try. The novus sounds interesting. 🤔

Yeh pretty much like hens teeth for a lot of the stuff. N14 sunny stuff does work with a little modification though. Haven’t thought about Primera parts. 🤔. Might have to look into that. 👍

Haha! Thanks. I still think it needs work. 😂

Glad you sorted it out. 😎👍

Thanks. Takes a lot of cleaning. 😂. I might do the shield 🤔. It does have a cold air feed from the front bumper though. Plus it’s not that fast to be honest. 😂😬

👍

It’s from a 1989 sunny ZX. So pretty rare. 😃

Ahhh ok... 😊Thank you.. @@KyushaStyleTuning

Should be starting the repair in the next week or so. Fingers crossed it should go smoothly 😬. Thanks fir watching. 😎👍

Yep. Looks like it 😢. I haven’t found from exactly where yet but I will look at the areas you mentioned. 👍. The floor could have spread from the sill or the other way around. Lots of work to be done now. 😂🛠

🙁

I’m hoping this new gasket lasts longer too. 😬.

Thank you. I agree. Great engines all round really :)

I will have to give polar blast a try 🤔

I only took the side skirt off! 😂😂. And most of the sill came with it. 😂Looks like I will be doing some welding next week. 🙄

yeahhh... I wish i could weld, my rear is quite rusty mostly behind oem muffler heat shield, only not rusted part is my rear subframe cuz its new :D triple coated with dinitrol ML, undercoat and wax :D

@@shutu6338 welding is all down to practice. I use gasless mug at home. Not ideal but cheap and gets the job done. Did you get a brand new subframe or was it refurbished? Mine looks like it off the Titanic 😂

@@KyushaStyleTuning dont know if refurbished or new but it was with original tag from place who sell "original parts" payed like 150pounds(180eur) last year

@@shutu6338 Thats not a bad price. Definitely something ive got to do soon. :)

Do you mean the DAW? Cakewalk by Bandlab.

Thanks! 😃. Hope so. Onwards and upwards. 😃🎉

Thanks dude! It’s taken a while but great to finally get there. 😎🎉🎊🎉🍾

@@KyushaStyleTuning how long has it taken you? I’ve been at it 2 and half years now?

9 years and 644 videos. 😂. Only been taking it seriously ish the last five or so.

Will do. Hopefully it will stay glossy. Glad you found where the noise was coming from. Have you put a differnt manifold on? I was looking at stainless ones.

@@KyushaStyleTuning no dont have budget for it yet. but i did get full gravity exhaust from UK 300Pounds. I like it but i need to put some work into it cuz some holders were re-welded not like OEM and muffler doesnt seal properly need some elbow grease and sadly exhaust didnt come with bolts only 1ring gasket :(.

@@KyushaStyleTuning also i got stainless(i believe) sport cat(payed 90eur) welded in Euro3 just to remove exhaust smell, it still smells when cold cuz Sports cat :D for 5mins

I’d like to do full stainless at some point. Maybe If I do an engine swap. 🤔😜. I’ve got the Japspeed back box which is nice but loud with out the silencer in it. 😬

@@KyushaStyleTuning Not 100% sure but i think japspeed and gravity is same shit, but japspeed is like 200pounds more for full exhaust dont know why the company buildings are next to each other :D

Check for leaks on the intake or outlet pipes. These can crack with age. Glad you liked the video. 😎👍

You will probably loose around 3 ltrs or so. 1zzfe hold around 6 / 7 ltrs. I always order the concentrate if I can or ready to use. They come in 5ltr bottles ready to use so you should have some spare. 😎👍

@@KyushaStyleTuning guess my 0.8L left over wont be enough :D gonna pick 5L G12/G12+, it aint expensive when u work at autoparts store :D. i saw u got some crazy spec G13 mannol -40C in UK :D hope it mixes well with your current coolant. standart red LL should be fine for me

@@shutu6338 yeh ordered by accident. 😂. Seems to have mixed fine.

Different sound now. The AC compressor clutch is sticking. 🙄. Another job on the list.

Excellent! My mot is due July. 😬

Thanks for the tip. Yeh didn’t come with the center gaskets. 🙄. Had to re use the old ones. Video coming soon.

I was a bit disappointed with the Ridex water pump. No O ring gasket and no longer bolts. Seems to be ok though. Hopefully. 😂

About 24hours. It didn’t change that much really. May need stronger coffee. 🤔

It’s a Ridex pump. They do a lot of aftermarket parts. Not bad price and good quality. Auto doc has a good range.

Nice! Celica days are good days. I’m considering a full resto on mine. The underneath is pretty bad. 😬

Yes it did. But now the ac pump is making a noise. 🙄. Video coming soon.

Tensioner pully has a slight wobble. Water pump is making the noise and has been swapped. Ac pully clutch needs doing next. 😬

@@KyushaStyleTuning guess imma need waterpump too :(

yeh i've seen that done. Nice silicone wax in it. Henry Cole does it a lot ;)

Funny you should ask that. The auto box needs looking at so will be back on the channel soon. 😜

Thanks for the comment. It seems to be a constant noise growing slightly louder but doesn’t change no matter what speed or revs. Then it disappears. 🙄. No change to performance. I was thinking maybe a/c compressor or water pump . But wouldn’t this change with revs? It’s got me baffled. Going to have to remove all the covers and have a closer look over the next few days 😬

@@KyushaStyleTuning It does sound like metal rubbing when listening on YT dont know how IRL. reminds me chainsaw :D. i`m no expert just random celica owner so i hope its not loose chain or vvti spring rattle and hope maybe dead O-ring somewhere releasing higher noise from engine than usual. Are u losing any oil? im losing like 1liter every 2k miles. edit: also i redline every stop light so maybe its my fault

Not losing any oil. It’s high mileage but seems good on oil. I do service it very regularly too. But then like you. It does get red lined when I can. 😂😂. Noise disappeared completely today. 🤷‍♂️. More investigation needed. 🙄

@@KyushaStyleTuning what oil type u use(ACEA ILSAC) i currently run A3/B4 liqui moly 5w30 special LL, kinda on cheap end but it has a3/b4 older oil qualities with lower chain wear, cuz new oil... low emission crap ilsac 6 eats chains

I use Castrol fully synthetic 5w 40 if I can’t get the Toyota 5w 40. For a high mileage engine it’s pretty good on oil. As long as I change it regularly that is. 😬👍

Thanks mate. I will take a look at the water pump. It’s a cam chain on these engines but I will check the tensioner and guides. 🤔

@@KyushaStyleTuning well it sounds like a bearing noise like I said I didn't know if it had a cambelt or chain but it could be the chain it self as they can make that noise if it hasn't been done when you own owed it I would change it as my friends BMW had the same sort of sound till it got changed hope you get it sorted out mate

@@petergrinnell2500 cool mate. Thanks for the advice. Hope it’s something simple. 😬 might be time for a rebuild. 😂

vvti cam gear

@@fF-jb4gs interesting. Do you have any more info. 🤔

Ouch! Where did you buy yours from? I got mine from Temu and I’m glad I didn’t pay a lot for it. 🙄. It basically a detailer and not a very good one.

Its on ali guys 😂

Thanks! 😃

Hi. Sorry but I don’t have the pic anymore. You might be able to download a wiring plan from Karcher

Haha. Just a bit Amazing how much quicker it feels now the brakes aren’t on all the time too. 😂🛠

😂👍

Lots of other products out there that are better and cheaper by quantity too. 🤔

😂 I agree my Celica has very little black plastic trim. Except under the bonnet. 🙄. I’ve had many older cars with black plastic bumpers etc and had the same problem. I was always using silicone gels etc to blacken them up. I’ve seen the heat gun method used but haven’t tried it. Don’t want to take the risk really, especially on customers cars. 😜 🔥

@@KyushaStyleTuning ahh yes under the bonnet I’ve got lots of plastic of course, but I’m Not worried about that, as long as it’s clean, I don’t worry about it being black, having said that it’s not really faded anyway, as it’s never under direct sun light. I appreciate if you do it for a living, you need to do the plastics under the bonnet too.

Your welcome. Hope you get yours fixed. 😃👍

I highly recommended it. Not sure if it’s body shop safe though. 🤔😜👍