Видео

Yes, running in stock Settings only.

Glad you enjoyed it! Thanks a lot for sub ❤️

Hi, as noted in my pinned comment, performance greatly depends on altitude and the map you're flying over. In densely populated cities and at low altitudes, the performance is currently subpar. However, with an X3D CPU, I hope you should consistently achieve over 60 FPS. Do let me know how it goes with your new build. Have fun with your build and the game! ❤

@@RenRaGGaming Thats acceptable. I mainly plan on playing a digital tourist in this game to see the nature of Earth. Citys dont intrest me at all ;)

​@@Apophis371 it should be fine then. Enjoy the game 🙂

Sure it will. Enjoy 🙂

Or wait for the 8800xt (or whatever it will be called).

Yes, I also wish the same..There is DLSS Frame Generation, but not the FSR Frame Gen. But I came to know there is a mod for enabling FSR Frame Generation, you can try that out if you really wish.

I have recorded the game using x264 encoder for 4K recording, which uses CPU to record, Without stressing up the GPU. That's the reason for Increased CPU usage in 4K

@ Oh ok I understand thanks for the explanation

Even though my CPU meets the recommended specifications, the game is not well-optimized and requires an update to enhance performance. I've noticed a strange connection with CPU throttling when FSR is enabled. The timestamps clearly show this: 1:03 (FSR OFF & FG OFF) 3:01 (FSR ON & FG OFF) 4:50 (FSR OFF & FG ON) 6:35 (FSR ON & FG OFF) It seems that activating FSR puts a strain on the CPU, which is unusual because it typically shouldn't. Regardless, this game desperately needs a performance optimization update soon. Hope this helps 🙂

@@RenRaGGaming It’s not that it puts additional strain on the CPU, it just reduces the load on the GPU, which allows you to squeeze more out of the CPU. It would be interesting to look through intel presentmon with CPU/GPU Busy and CPU/GPU Wait times

I'm glad it helped you 🙂 🤝

32GB RAM is fine as per the official recommended requirements and if you notice RAM utilization throughout the video, it does not exceed 32GB . So you are good on the aspect of RAM. Hope this helps 🙂

In this game, you really don’t notice any input lag with Frame Gen turned on. Turn it ON and enjoy smoother gameplay with higher FPS! If you’re still worried about latency, you can pair it with AMD Anti-Lag in AMD Adrenaline to keep responsive. I hope this answers your concern, Thanks for Watching 🙂

It's garbage, even at 100+ FPS the input lag is noticeable and that's with NVIDIA Reflex ON.

@@RenRaGGaming it's very noticeable... i am waiting for patches, can't play it right now on 6750xt 5600 32gb 1440p

Thanks 🙂❤️

In Town Area alone, with FG: OFF and FSR: OFF, I was getting around 43FPS Avg, with FSR alone Turned ON (Balanced) - the FPS avg was around 48-50. Hope this helps!!, Thanks for watching.

@RenRaGGaming thanks

Glad it helped 😊

Thank you for doing GRE benchmarks and providing additional context for the games performance. Good GRE benchMArks are way harder to find compared to its younger brothers or Nvidia cards.

@@stevenostrowski6552 Get ready! You're in for a treat. This channel is all about the GRE, and I plan to test a wide variety of games with it. Stay tuned! 😀❤

Hey, thanks for watching video. X3D chips are powerful at gaming and sure it outperforms R5 7600. This video is recorded 2 days prior to release (Advance Access Build), now the developers added the AMD Frame Generation option to the game, which boosts the FPS by big margin. But the shuttering issues are still present, as you said it's better to stick with 1440p for the time being.

Congrats on the upgrade! Enjoy the boost! 🎮🔥 & Thanks for Watching ❤

Absolutely 💯, Hope they fix this soon 🤞

RAM is not an issue, Games recommended RAM is 16GB only. Some other components might be throttling your GPU. Run In-game benchmark and check the CPU simulation & graphs (refer the in-benchmark section on above video). Clean install you GPU Drivers and make sure "Performance" mode is enabled in AMD adrenaline and in windows settings before running the benchmark (Take my In-game benchmark results as reference: 22:47) Hope this helps 🤞. Thanks for Watching!!

@@RenRaGGaminghey, i did the in game benchmark and i got an average of 104 and a minimum of 84, i also checked and yours seems to be using more vram than mine, what do i do ?

i also have a 5700x3d, i dont think it’ll be a bottleneck

@@jaydenramirez8351 It means either something like Settings, driver conflicts or fault in other components is throttling the GPU or Fault might be in GPU Itself. so, to figure it out, make sure you are in Performance mode in windows and enable the AMD adrenaline Performance Overlay with CPU and GPU Details and run again the benchmark. Verify whether your GPU Usage is at 100% at most of the time and verify the Temps for the CPU & GPU at normal range (GPU Temp < 70c and CPU Temp < 80c), if not then it's getting Thermal Throttled. Make sure you do clean install of the GPU Drivers before running above run. Hope this helps you to figure out the issues 🤞

Thanks!!. Not yet, DL 2 is in my pipeline. Stay tuned 🙂

Yeah, just doesn’t feel like a bang-for-buck upgrade right now, so I’m holding off.

@RenRaGGaming nice touch in adding your findings in text, really adds context 👍

Sure, Will Add this in my pipeline. Stay Tuned! 🙂

Hey, thanks! 🙂

it depends on the scene you are in, if you see too much of the difference, then there is something wrong. As said in my multiplayer video comment, if you have FSR Enabled, please turn it off (since there is a bug in FSR for Black Ops 6 currently, which reduces the performance)

Sure, planning to do this on this weekend, Stay Tuned!! 😊

Hey, currently there is a bug in Black Ops 6, where using AMD FSR actually reduces performance. Once that’s resolved, I’ll test it again and release an FSR comparison video.

this mean, your CPU or (other) components is bottlenecking the GPU, you mentioned you are using exact setup (assuming CPU, RAM specs are exact as mine), there are few things that you can check 1. Check whether the CPU is getting thermal throttled. if so, re-apply the thermal paste or check your cooling system (CPU fan / AIO's) 2. Check whether Disk or RAM is throttling the CPU which in turn throttles the GPU. 3. Check Disk health and try re-seating the RAM. if you are running game from HDD, try moving to SSD (since SSD is required for the game) 4. Clean install AMD Drivers, including chipset drivers & make sure you are in "Performance" mode in Adrenaline Software 5. If you are using FSR, turn it off (since there is a bug with AMD FSR in Black ops 6) Other points to check 6. Update the windows to latest and make sure in settings "High Performance GPU" is being utilized by game and also overall system setting is set at "Performance" mode 7. Update BIOS to latest version (Be cautious) 8. Make sure you are in the recommended DirectX version 9. Verify the Integrity of the game files and close any CPU heavy task running in background Hope this helps 🤞, Thanks for Watching!

Hey, even though it’s a 5-year-old CPU, there shouldn’t be this much performance difference if things are running well. I'm running at max settings on all resolutions here, so this could be due to driver or game file issues, or even a bottleneck from another component. Below are few things you can try to fix the issue: 1.Clean reinstall the latest GPU driver and set performance mode in Adrenaline software. 2.Verify the integrity of game files. 3.If you’re using FSR, turn it OFF (there’s a bug with FSR causing drops); CAS might work better. 4.Run a GPU stress test in Adrenaline and check metrics for any GPU issues. 5.Do a CPU benchmark and monitor CPU temps & logs for any abnormalities. 6.Make sure the game is on an SSD and that your system meets the game’s RAM requirements. 7.Ensure DirectX is updated & meets the requirement (updating OS might also be helpful) [I'm yet to update Win 11 to 24H2, so I cannot comment on 24H2 performance issues, if you are already in it] Note: Always try to give more Work to GPU than the CPU if the CPU is old (to avoid CPU bottleneck), so try running in ULTRA settings and see how it goes Hope this helps! 🤞 Let me know how it goes, and thanks for watching!

the benchmark has frame generation on, you have to disable it in campaign settings or game files

@jaybrd6k This is Multiplayer benchmark and there is No AMD Frame Generation support for Multiplayer Yet in Black Ops6. Campaign has the Frame Generation Option. This (Multiplayer) Benchmark is done Without Frame Generation and without any Upscaling Setting, as shown in video. In my campaign Benchmark Video, you could actually see the FG Enabled, I have compared the FPS Boost gained by enabling FG on that Video, which applies only for campaign.

@@RenRaGGaming Hey thanks so much for the feedback and trying to help! So far I've only changed the upscaling to CAS and it did improve slightly, but it still feels very inconsistent. I will try some of the other ideas when i have a bit more time, I just currently have some exams to study for. Thanks again for the suggestions!

@@pastamasta4355 Happy to help, Good Luck with your exams 🙂

Thanks!

Awesome! 😎 You’re in for a good time!

Hey, thanks for the suggestion! I appreciate it. Right now, Competitive settings aren’t in my plans, but I'll definitely keep it in mind for the future. 😊 Thanks for watching

Thanks for the suggestion! I’ve actually allocated 90% of my GPU VRAM to the game, as shown in the in-game settings. If you’d like to see the allocation and utilization as real-time RTSS stats in the left panel, I can look into adding that. Note: My next two videos are already recorded and in the final stages, so this stat won’t be available in those, but I'll keep it in mind for future uploads!

Thanks for the compliment! I'm glad you enjoyed the video. As for your question, you might see a 1% to 3% FPS increase with the 7600X ✌️

Hmm, I haven't checked on other card benchmarks yet. I will check those out. My speculation is, this might be due to a peculiar bug I faced During my testing, actually when you set upscale setting to AMD FSR, my fps tanked a lot, like around 30-40%. Whoever tested with Upscaler ON might be tanking their FPS, I think.. You can also re watch those videos, if that is the case ask them to retest without upscale Settings. That might fix low fps issue, I believe...✌️

frame generation is on

@@jaybrd6k his benchmark says its off

@jaybrd6k AMD Frame Generation Setting itself not Available for "Multiplayer" yet, you might have confused with my Campaign benchmark video (FG is available in Campaign)

I was thinking the same thing this is impressive especially with a mid range CPU glad they’re using one instead of something most of us aren’t gonna buy so I don’t have to guess what the drop would be. Not only high frames but stable trend I would see from COD videos is people getting x amount running around then it dips a lot when action is happening.

Thank you so much 😀