- Видео 2
- Просмотров 316 342
Mqt Creative Innovations Studio Project
США
Добавлен 28 авг 2017
A project to create a creative content network and studio in Marquette MI.
Fixing Ariens snow blower wheels not turning or surging worn out drive shaft support
Ariens wheels not turning or surging
Просмотров: 753
Видео
Low or No water flow- How to Fix a Moen single handle high arc kitchen faucet
Просмотров 316 тыс.4 года назад
Low or no water flow fixing a Moen single handle kitchen faucet.
What is the proper size Allen wrench to remove the handle set screw?
What size is the Allen wrench? Proper? What size did you use
Thank you for this video ,thought the small ring cap unscrewed like other videos whoo-hoo it just pops off..Thanks again
What model number is this faucet. I need new O rings.
What if when you install a new fa ucet and no water is coming though it
thx. you just saved me a call to the plumber.
What you showed at the end of the video. Part of my gasket got stuck in the hot water line leading to the handle it is a good size piece and it totally blocked the braided line that leads to the faucet.Cant get the piece out so I'm without hot water for know until I buy a new faucet
It worked! Thanks so much. I was about to call a plumber.
Can't get the retainer unscrewed. We have really hard water in our city. I might have to cut it out and just cross my fingers I don't mess up the threads for the new one
thanks for this. installed a new one and the under-sink valves hadn't been touched in over 20 years and must have dislodged a bunch of gunk right into it cause i had no cold water to speak of.
Thanks for the vid!
I too have that black smudgy stuff in my line. Any idea what it is since it’s clearly leaking into the water supply?
Thank you for sharing and making this video. This helped me fixing my problem. I appreciate you!!
Thanks for making this video. I’m trying this in the morning. Wish me luck!
Can you please tell me what size allen wrench you used to get the set screw out? My screw is hidden on the bottom and, I cannot see to find the correct. size. Thank you!
Great Video ! I have a question, I often have to tighten the handle set screw.. it comes lose two days later. I can’t understand why.
It did not work. I have no idea what to do next.
Have same low flow hot water problem, plumber didn't flush supply lines of rust, etc., from water heater heater before install of new faucet, he has disappeared. Will try turning on hot and cold water to flush lines before reinstalling the cartridge
Had the same problem, found this video. Followed it step by step, and had the exact same black rubbery debris that you found. Clearly an issue with this Moen faucet, you are literally a life saver. I was about to uninstall the entire thing and return it, leaving my kitchen with no faucet since I threw away the old crusty one I removed. Thank you for posting this!!
Well done sir and thank you.
I kept yelling "there's more stuff coming put of the opening!" So I'm glad you addressed it. We had exactly the same problem here - glad i found your video
If you ever need to replace these type shut-offs, switch to a 1/4 turn ball valve shut-off. Never leak, easy to turn.
Wish I would have come here first before I drained my hot water heater! My clog was even more simple, it was in the hose aerator.
Why is the light flashing and now I have no water, touch faucet model.
What you are talking about in this video, I’ve already had that problem. Will not be buying a moen faucet again.
Wow I tried replacing the valve, and taking apart the cartridge. I had this exact issue. Part of the old valve seal was blocking the water line. Idk if I would have figured that out myself so thank you so much for explaining your whole situation and how to fix it!
When you turn the shutoffs back on never fully open them - open fully then back off quarter turn - the next time you need to turn them off you’ll have wriggle room in their turning rather than trying to turn them in one direction from fully open. They will be done much easier to turn that way
I had the exact same problem with the exact same root cause. Thank you sir!
Excellent video helped save me valuable money as I was advised to change faucet. I did have a leaking hot water plug which they fixed for minimal cost but then said that the faucet has to be replaced. Thanks to your video I could find the debris once I opened the faucet and fix the hot water issue
Great video thanks just what I needed
Thanks you are the master.
Thanks for the well explained video.
Solved my issue! Actually had to change the cold water valve first as it was locked open. After that, still low cold line pressure and the faucet was the issue
Okay, I’m now aware the water won’t come back on…
great video..BUT...I couldn't get the water to stop pissing out the valve even tho I shut off the water valves...any suggestions? Thanx!!
Great filming. Very informative.
the intro is goated
Thanks, I bought a new faucet,but returned it after following your video ! Thank you for sharing your knowledge !!
Covering the heart of the matter and many circumstances everyone wants to post cleaning the final screen videos and lack to cover this information. Well done. ✌😎
This is exactly what I needed. We had the same little black pieces from broken valve. Was able to follow this step by step. Thank you.
Thank you for this! I am encouraged to give it a try. My clogged line is the cold. Happened after I shut off the supply line to service my RO system.
Great video, I saw all these others with back flushing so I did that, had some chunks of black rubber come out but still wouldn't get full pressure. I knew there was some in the transfer but didn't know how to get to it until I saw your video. Took off my handle, and the hot water side looked just like yours blocked with a big chunk of rubber. thank you
Your a life saver! Thanks.
This was super-helpful to me. The cartridge itself and the underlying parts were all clogged with lime deposits. I took everything apart and flushed with vinegar, and soaked the cartridge in vinegar before taking it apart to ensure that it was clean. Faucet was only trickling on both hot and cold, and now works like new.
Usually you can do that without taking the faucet apart: - Turn off the hot water shut-off under the sink. - Disconnect the supply hose from the hot water shut-off valve and route it into a bucket. - Turn on the hot and cold water. This will back flush the hot side and the crap ends up in the bucket. If you block the output of the water, finger or saran wrap under head threads, it will pressurize the reverse flow of the hot water line. Let it run a minute or so after the crap comes out to get all of it.
what’s the problem, if you cleaned out the cartridge & you still have low water pressure?
Thank you very much. Fixed it straight up. I had to clean it twice, same problem with the washer in the shut off valve.
thank you so much for making this video. I have the exact same problem and now know how to fix it.
really helpful, thanks
After cleaning mine out it is still clogged. Is there some where before that cartridge that it can clog
I tried to do it two times but with no luck and I just purchased it at Lowes. I called the company and they said it would take 5 to 7 days to get new cartilage shipped to me. I went to Lowes and brought another for $20. I tried that one with no luck. But when you went to clean out the inside I did the same and a small piece of black plastic came out like in your video. I then reinserted it and now it works! Thank you! I was about to go back and buy a new one but not a Moen because I spent about an hour of my time. And I didn't want to go through it again.