Видео

So, leave the heatilator right where it is, gotcha

Dude that was an amazing video. I watched it all the way through. You da man! I guess I'm going to leave my heatalator there. At least it works!

Lol, this is an old video, but man! It's a different feeling when you gotta load by yourself. Haha

One way looks yellow other way looks white. What is it ?

The house I had in Claremore had a Heatalator installed. The original owner was a rock mason, so that entire wall and hearth were rock. What a demolition it would be if the owners after me ever had to take it out. Tons of native rock.

Great video... Thanks for taking the time and effort posting this info... Shame on the manufacturers that do not mark up the terminal with the proper connections so we, the end user can do things right. Today I could solve a long time mistery trying to figure out why lights were performing so poorly in 2 trucks. Now they shine like stars. THanks!!!

Please perform this same test on a H6054 sealed beam light.

What are the measurements for the 2x8 pieces for the tires under the bump stop? Cant find cut up pieces anywhere I’m going to have to buy a big 2x8 and have Home Depot cut it up

Sure did, Thanks.

Thank a lot of detail work

UPDATE: I performed this "Hillbilly fix" over 8 years ago and to this day it's still holding up just fine! We will probably be getting rid of the van in 3 more months, but I just wanted to share the information that we've experienced zero problems from this fix. Thanks - TG

yet another waste of time....there is yet another one under there and has a messed up clamp in the soup no like from me

This fire pit is one of a few covered pits that is on the list ruclips.net/user/postUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.

Great heater for our 1910 bungalow great room. Highly recommended.Puts out allot of heat even on low setting.

How did you finally remove the chimney pipe? Did you just saw it into pieces? We just removed our old Heatlilator and it was very difficult. We just have the chimney pipe left.

Really appreciate your excellent documentary. Amazed at your good humor on camera as you pealed layer after layer of the behemoth onion. Thank you for revealing the hidden configuration and size of these beasts. As I may have to follow your trail here, your leading in to the unknown sure sets the expectations on the scope the effort. Many thanks sir!

I can't thank you enough for showing me the light. I was going to remove our bedroom unit and install an electric fireplace higher up the wall so my wife has a better view while laying in bed. After this video I told her she needs to sit up more and she'll be fine. Bless you brother!

Nice job. Had a 70 firebird in high school-college. Wish I still had.

Hi, I know this video is a little more complicated goal, but Do they come with low and high lights integreated without touching a damn wire ?

Hi all, I believe Seth is accurate . I believe that the low beam is the larger filament and the high beam is the smaller one. I have broken my 4x6 sealed beam bulb and looked at the bulb closely and just like Tango Golf stated, the ground is as he described. If you put left on ground, and add 12v to the lower middle and look at the wall, it will be higher. If you touch the upper right with 12v, it will be brighter, but will be lower on the wall.

An hour after the Heatilator was removed, his entire house collapsed.

Is it possible to just cover the vents and just use it as a wood burning firebox?

Great job this was hilarious and informative

Agh way too much work lol. You can use a grinder cut away the inside and put an insert right into it. It's not even a 1 day project.

Great job brotha, you think all sealed beam are this configuration ?

Can you give example of #StanleySealedBeamHeadlight

This is exactly how I wanna do my future 70 esprit bird... Hope you make a full walkthrough of this car

Great video!! Thanks for taking the time to make that during your project. What did you end up putting instead?

Question: how was the 'heated air' blown back into your space? I saw the fans installed in the rock (inlet), but I did not see how heated air was blown back into the house.

Thanks so much! About to do this tomorrow!!

~ Thank you for posting your video. You helped me change my mind about removing mine. 😣

That was awesome. Without any guidance and by yourself. I just watched another video where they cut out the back of the chimney to replace. This is a professional team of 3 that had access to the top of the chimney and installed a new lining. I have a 23 year old heatilator that produces a nice fire but 0 heat. Will probably leave it alone after seeing what an enormous job it is to replace

Ugh, now at least I know what I'm in for :P

there is no damn point in publishing when you can't hear what you're saying with all the wind but thanks for trying

You are a saint. Was considering removing heatilator for a wood stove insert replacement but not anymore. Saved me tons of grief.

All you had to do is undo 10 screws without tearing it out

I have the same exact fireplace and stone. After watching this I guess I'll leave mine in

Well my friend this is not the safe nor the right way to do it. The best way to do it is first to buy a proper trailer where you dont even need additional ramps for a 350z. If I would come to a customer with such a trailer and ramps like you use, they would send me back home :)

We’ve been told our brick fireplace will have to be taken down and the old Heatilator insert removed in order to replace gas logs installed by a previous owner in the early 90s, perhaps not to code? Have tried three or four times to get logs replaced and installers won’t do it because of that insert. Is there a reason the insert has to come out?

I am still using my Heatilator Mark 123 Fireplace. The refractory panels have seen a better day but otherwise is in pretty good shape.

Tango Golf - If you reach out to me I'll provide the SAE - Society of Automotive Engineers document identifying the correct terminals.

This is NOT a good idea. Need a "Y" flow. The right kit is $22 Napa. Chrysler dealer price for entire hose system $418. My local dealer, doesn't sell the small kit. NAPA full hose system $175. Small kit with aluminum y joint $22. Yeap there it is !

it's not ugly at all.....in fact, it looks better than the ugly y-pipe....good job....thanks....

Just run the engine for a few minutes, pop the hood, and have a buddy look when you press the gas (not the break). You'll see immediately the source.

I have a vw routan and it has this motor. I locked up the part but for a town & country van and they sell the metal replacement part for around $15. The hose with plastic is $115.

TG - fire for effect

not everything old is bad

why was it necessary to remove it ?

Thanks, what did you replace it with?

This is accurate. Today I replaced all four headlights with (H4656+H4651)*2 and had to redo the sockets. I was forced to do the further testing myself.