- Видео 5
- Просмотров 301 066
On The Workbench
Ирландия
Добавлен 4 мар 2019
How To Inlay Pearl or Abalone
Here I show you an easy way to create an abalone inlaid rosewood necklace pendant. This is very simple and fun to do!
Enjoy!!
Music:
Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0/
Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100499
Artist: incompetech.com/
Enjoy!!
Music:
Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0/
Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100499
Artist: incompetech.com/
Просмотров: 1 171
Видео
DIY Rustic Coffee Table
Просмотров 1282 года назад
Quick and easy small coffee table build! This project started with an old chopping board that happened to be a really nice piece of wood so I decided to re-purpose it! It has a rustic look in keeping with the farmhouse style. As the wood used for this table was from an old chopping board and a few scraps left over from other builds, I guess you could call this an upcycled project, which is a fu...
Rosewood & Turquoise Butterfly Pendant
Просмотров 994 года назад
Rosewood butterfly pendant inlaid with crushed turquoise gemstone.
Sharpen A Plane!
Просмотров 1104 года назад
Simple, quick and easy way to sharpen your plane irons and chisels, more time woodworking, less time sharpening!
DIY Drawing Board / Art Easel
Просмотров 300 тыс.5 лет назад
Here I make a very simple drawing / board artists easel, great for holding paper and canvas for sketching and painting!
Já cheguei apaixonada pelo gavetão ❤
Hello, which wood should I use
Amazing...
Liked and subscribed because of the effort 😅
I wouild have liked to see it at it's lowers level.
Oh this easle lovely! What id give to know someone with the proper tools so that I could try n build myself one! 😂love the touch at the end.. lol like the cherry on top your Fav ice cream Sunday 😅
👏👏👏
Respect, u made it look easy, I had my similar idea of making one, but I hv no tools. 😊
Do you sell any?
This is dope! I think I'll add a bottom and turn that into a storage box maybe a magnet to hold it closed. Amazing job! 🤌🍻
Does anyone know of a video that shows how to build a drawing table that doesn't require $3K in tools?
Would be worth noting a couple of things on this vid: 1) this can all be done with hand tool ie hand saw, just the cordless drill is needed. 2 ) that pivot point on the support arm looks to be a partially threaded screw so that the portion going through the hole in the arm is smooth with clearance, so the screw doesn’t turn and chew up the wood. Thanks for the vid 👍
I like how simple and functional this is I could build a reciprocal Bissell for more angel adjustments
I want it!
ur worktable
Bro put the good face of the plywood to the back.
How far apart are the openings for the stick to lock into? And how far does the first one from the front come in? Like from the front of the side board to the first opening?
I love this design and built one just like it!! Thank you for posting this great design 🙂
The round crossbar must be longer so that it is easier to grip when the table is down and unfolded. with the short roundbar, you can always look sideways until you can grab it. It is not a blind way to grab it. That bothers me a lot.
las medidas?? 😢
LOL. Super Cute ending!! Clean and Quality project. Thank you for sharing. I would definitely make stuff like these in a heartbeat for my nephews and nieces, but I don't have power tools. 🙃
How long are the two side rotating arms,...10" ? Nice. I even are like 6". Do they have to be a certain length ?
Also, I made one mistake,... my main board is same dimension as my base frame. So, it all looks like a complete box when they 'mate' together. Does it really matter ? I can still build the swivel joint in the back right ?
Great video. But I couldn't quite see how you made each of the slots. Drilled them (what diameter),.. and then how did you make the 'U' shape slot ?
How much po
Well done 👍🏻 I am thinking of diy but now I think maybe I will just buy one😅🤣 I don't have any equipment to start with But thank you for the video will definitely consider diy in the future ☺️
must be a rich DIYer to have all those machines.
Breaking the edges, sanding...and on the whole good job; however, 'tis a pity that the end grain didn't received that final cut. Ah never mind, life continues I suppose
Hi Fabulous job just what I need, could you give dimensions to a complete novice pls as a first project?
Hi Maggie, thank you! I gifted this to somebody shortly after making it so I don't have dimensions for it. However, I didn't actually go by any measurements. Just use a piece of board the size you need and all the other parts can they be made to fit the board you go with! Good luck with it! 👍
Hi, im trying to build one of this for me for a long time but i never can make it correct. Can you share your dimensions please? Thx for the video
Nice
You can get the same style at 5 below just smaller
How mach would you charge if i order one for myself?
This is great but not very informative for me to be able to do it myself
❤🇦🇷
😲😲😲😲😲😲
Exactly what I need
6:45 Is that a screw? Screws can be used as turning mechanisms related stuff? I need confirmations before i actually try pls send help 😂
Yes, it is a screw. Use a "pan-head" screw andscrew it in all the way and then loosen it half a turn to allow the wood too move freely. Good luck with it :)
@@ontheworkbench8743 thanks bro, lifesaver
Wow.... So amazing...❤️😍
If you supply them in flat p[ack I wouls def buy one Daughter starts college in September.
Muy chistoso!! Con un taller todo equipado.... pues si.... claro....
this is great, do you sell them?
What are the measurements
What are the measurements for the drawing board
Yoooooooo what song is this tho Great video! Totally gonna make one myself haha
me gusto el dibujo final!! excelente tablero..!!
I found one on Amazon and thought to myself wtf really almost 50 bucks for one that size it rather just kmake it myself
I would SOOOO make this... IF I had the tools you do lmao
Gracefully crafted 👏👍