Видео

I bought mine from a used appliance center. The new ones are weak lol. ✌🏻❤️

I appreciate your input on the music, yes it’s dumb and in the future I won’t use it. The spin dryer runs up to about 3200 rpm, a washing machine does not. So if you don’t pack in the fabric, the machine jumps around before balancing out. Spin drying fabric in spin dryers is very common in the tie dye community and I love mine, wouldn’t trade it for the world. Some campers use them as well as people with no immediate access to a dryer. I’d say the product works well and the dry time is super fast when hanging or just working with the fabric. The music is silly though just seemed like the thing to do at the time. ✌🏻

You are a absolutely correct, I just store them a couple days with no problems, any longer I leave the bags open. Good call and thanks for pointing that out.

We’re safe buddy, just bashed and broken all over the place. ✌🏻❤️

@@SpaceCaptainCreations sorry you had to go through that but I’m glad you guys are okay❤️

Cassette only. I have the full album on digital though. Thanks!

@@SpaceCaptainCreations Sweet. I've been hunting down and collecting all the old school Local Florida punk I can get my hands on. Especially the 7" EP's. Anyway you can share the Digital with me? Would be much appreciated. You still here in FL?

@@seqouiaflame are you on Instagram?

@@SpaceCaptainCreations Yes I am. Also under Seqouiaflame.

I think? Don't use it much.

No, it’s clear little drops. There is a few lines of it that has a tan tint, but it’s mostly clear. The ants usually eat it all. There is some wasp debris / waste in one area and thousands of dead ants though. I think you are thinking of the wasp waste. There was a nest above it that was probably there a couple years before we moved in. ✌🏻

@@SpaceCaptainCreations oh no..i think i got ripped off.. i bought the maxforce fc ant bait, it looks exactly like urs, but mine came out dark brown, like the wasp waste's color 😭 the ants went to it at first but quickly left

@@legendsandheroesfamily7591 oh no! Now keep in mind the ants still might be dying off somewhere, this was an infestation. I did switch up to a new product over the last year that works great too, due to the rising cost of the max force. It’s called OptiGuard Ant. Clear gel in a 4 pack on Amazon. Kills all ants fast. Even my neighbors carpenter ants that kept foraging in my yard. I think I got it for about $38 dollars a couple years ago and still have a tube and a half left. ✌🏻

@@SpaceCaptainCreations Oh nice thanks for the tip! Do you know if it works on pharaoh ants? I'm desperate 😁😅 I used Terro first while waiting for the Maxforce FC, they swarmed it, it's now the third day. There are lulls then they'd suddenly swarm again.. but I noticed that the ants are super tiny now... and some feed on the Terro but mayeb around half go walking around to other places 😊 haha sorry for the long comment... these darn ants 😊 thanks for replying!

just checked, couldnt get optiguard where I am.. is that similar to advion? 😊

Thanks I appreciate it. I love the camo spiral, could be my new favorite palette. The splits worked out great. 🤟🏻

Thanks for the sub, I just got started recently. 😀✌🏻❤️

That’s where I’m going with it, it looks cool. Thanks! ✌🏻❤️

Thank you and for sure, long ends or knots for sure. ✌🏻❤️

Thanks brother, I love making shirts but am just getting started doing the videos. More on the way! ✌🏻❤️

Greg, you’ll love it. I throw my material in a bucket and pull them out at will and spin them out in seconds. I got tired of wringing stuff out only to have to hang dry it some more. For the price it’s a game changer no matter what you throw in it. ✌🏻❤️

Thanks! ✌🏻❤️

Thank you 😊

Haha, always on the holidays. I should be endorsed by the toy company 😂

Other than following the instructions in the manual it will work natively with its own settings. In order to program it you will need to follow the tutorial on RUclips for smart knobs script. And it can be daunting. You need to install script into reaper for full functionality. In the video they show you the install using a different controller but midi setup is the same. Once I had everything installed properly the only catch was the xtouch needs to be in Behringer mode (factory) and not Mackie Control Mode. But start with the reaper forum and find the smart knobs tutorial and you’ll be on your way.

Well, first I followed the instructions off the forum to get knobs and everything installed. I tried repeatedly to get everything working with glitchy results. Finally I reset the x touch mini and put it in Behringer mode instead of Mackie mode and boom, everything worked as it should and I was able to program all the knobs and buttons in both layers. Seems simple but it worked for me.

Just throw it out. It’s limp biz kit

Not sure about the Nektar. It took hours, my biggest problem was in mackie control it didn’t work. When I powered the controller back up in native mode it worked flawlessly. Might be midi competing for channel commands in MCM. Behringer native linked immediately on reset and worked great.

yadi8903, good luck. Let it dry first. Get it damp and the silly string peels off, don’t over do it with the water though. Silly String lol.

Same here I bought that toy for my children and it’s hard to get off the ceiling

Jah3lohim the last thing sending it signal was my jam man looper, I think I had a loop running off a drone synth I built from a kit. When I turned off the looper pedal it held the last signal in the outer rings memory is what I think is happening. The pedal does have modulation filters built in though that will ramp if you turn the knobs and get it going. But as far as signal nothing was active at the time of this video only what the outer rings decided to do. The pedal is a sophisticated ring modulator so it has its own oscillating circuit. Unfortunately I haven’t spent more than a couple hours messing with it because you could easily stay up until sunrise tweaking it. I really haven’t found too much use with it as a guitar pedal to say, it’s more suited for drones and odd soundscapes. Lots of fun though could be used in a million different ways I guess. Maybe even as a dub siren with a little work. Thanks for asking.

@@SpaceCaptainCreations very cool. I actually just preordered the V2 a few days ago but it seems they reworked it so the user has greater control which kinda disappoints me because I really like the unbridled strangeness Ive heard in demos of the original. Hopefully it'll be similar but I know they did away with the built in fuzz/dirt which is nice in some ways & I can always get that back by running through a fuzz prior... i dunno, just hope it's as nice as the first outer rings.

Jah3lohim it’s an odd duck for sure. Adventure Audio does a great job with their tweaker pedals. I saw that second version was coming out with some changes to the chipset. It’ll be interesting to see what is different. Have fun playing around with it you’ll be glued to it for hours lol.

SpaceMothersSon did you get to experiment with your Outer Rings? With fuzz? I ended up selling mine to clear some space for new toys. Just wondering what you thought of the pedal. ✌🏻🤘🏻

@@SpaceCaptainCreations I did, i got the Outer Rings v2 but was unimpressed, honestly, wound up selling it & getting a Randy's Revenge from Fairfield Circuitry which I love, it's an amazing ring modulator & also do tremolo & can even get into bit crusher/ sample rate reduction territory

You should put something flat on top of the record THEN the weight. The weight can cause an indent in the record if it’s too warm.

trencher7 yes, living in Florida long term heat is about 45 minutes. Not really hot enough to flatten the record substrate though in my opinion. Keep tuned in I’m looking at a new permanent, quick and slightly inexpensive idea that is also good for other uses. I will say, to be fair, I have had records mysteriously cure themselves after months stored upright in a semi tight storage environment. You always have to take into account the packaging and spine size of the sleeve compared to what’s actually in the packaging. Odd spaces will most definitely create warping over time. Booklets and so on in the sleeves. But in my honest opinion time and ambient pressure will work do to molecular repopulation of the material, it just depends on how many grey hairs you want to establish in the meantime, lol. Thanks for asking.

@@SpaceCaptainCreations Thanks. I just dug up my collection and have a few with some mild warping on the ends.

Hugh Betcha fortunately it’s not a totally common thing, it’s usually from the factory due to poor packaging and overly tightened shrink. This has helped me a few times but I’m working on a way better method.

David Jennings you nailed it about the grooves. I’m going to try out our new T Shirt press with a digital thermometer and see what happens, my wife would kill me if she thought I bought a new piece of machinery to flatten records lol.