Видео

I think yeah you could use the same principle for Waves, I'm not a big user of it so don't have much knowledge unfortunately

@@sidstewart7399 thank you so much for watching

Ciao, grazie per aver guardato il video. Tutti I cambiamenti fatti nell'app SQ4YOU rimangono salvati sul desk,quindi se per esempio Il drum cambia di 5db la cassa e il rullante quei cambiamenti avvengono nel suo mix e rimangono salvati sul mixer. spero la risposta sia stata di aiuto

Thanks for watching , the process is the same for windows as well

Thanks for watching

Thank you so much for watching and for the comment.

thanks for watching. I'm glad this was helpful

Thanks for watching. I use Teamview to share my mini mac screen and make changes

Hello thanks for watching, on this we had on mono mix, only drum and ket on wired stereo mix. I don't use any audience mics

@@imdomtrotta Nice, it sounded very balanced. Was the aux signal processed (post EQ/comp) or pre?

@@OftheSeven no nothing particular just the eq that I have at the front on each instrument and vocal

The camera was strapped to my chest. If you have suggestions for where to put the camera, feel free to write them in the comments.

thanks

Chest most of the time

So if I insert the automix before the fader unfortunately every mic will effect the automix even if not live, as I have only one way to choose where to put the insert point I prefer to put that after the fader so I only have the automix working with the mic that are live, the 5045 in my case it's just there to help a bit the work that auto mix is already doing. Thanks for your comments, I'm always happy to hear other opinions and if any other sound op has done something different I will be more than happy to try.

Thanks

Hello there, thanks for watching. yes the pouch are useful! I've created several videos about the Stream Deck on my channel. Here are a few use cases I'd like to share with you: 1. With my SQ5, I use them to communicate with each musician while simultaneously opening their AUX mix. 2. I can press record for Reaper and mark each session accordingly. 3. For QLab, I can cue specific tracks, play, stop, and pause as needed. 4. I utilize them for software like Barco or AW for calling presets or other functions. 5. Sometimes, if there isn't enough budget for two technicians and I'm managing video switching, PowerPoint, and playing multiple videos, I can network all the laptops together. This allows me to play the videos, switch to a preset, and make the video live with just one button press. Setting this up isn't easy and requires a good understanding of networking and each software involved. Machines can fail, so being able to troubleshoot quickly is essential.

@@imdomtrotta Yeah, these are exactly the things I thought of, but for (semi)permanent installations. I'm an network engineer and software programmer, but I find networking everything together and fiddling with OSC, companion, IPs and ports etc., let alone some OSC routers and converters in a touring situation time consuming and not worth it. For permanent deployment, it's awesome... I'm more of a lightning guy, but I like 1, that might be worth the effort as it's only a single device...

Sorry, sq5 for monitor mix desk!

Hello @mshep6318, so this is how I will approach this. 1. you will need a Slink to be able to connect the 2 desk FOH and MON 2. USB B to your Qlab Machine 3. You will need to patch the USB B Channel (Qlab output) to channel 15 to 26. 4. Use Tie Liens to send your Qlab Channel to your Monitor Desk

You can run a compression on each channel. you can side chain only one channel, although I don't remember if if you side chain to a Group, so you can send the 8 channel to a group and side chain that group, never tried before

Happy to help!

got a new camera, so more stuff will come!

yeah you could do that, you need first assign the soft key to a mix select and after you will need to assign that to the stream deck, but you will need to have the PFL always select on the master so when you will select the mix you will be able to select the mix, this is the way that I use it

@@imdomtrotta Thanks a lot Domenico.

did you download the right software? Are the IP addresses all in the same range?

Yes sorry I figured it out, I had everything plugged into a POE switch and realized I need to have router

Just ordered a box, thank you!

@@imdomtrotta Glad to help someone who helped me 🙏😊

thank you @@F3PIZZA

🙏

I carry them in my backpack, but in the Pelican case, I avoid storing food

Thanks for watching for the amazing words. This link will help you amzn.to/3Ojvwbe

Hello there, thank you for watching! at the moment there isn't any module for the CQ Series

@@imdomtrotta appreciate the reply. im hoping they make one soon I guess it just hasn’t been out long enough yet

Thanks for watching

Thanks

Hey Evanberg1605, thanks for watching. 1. Yes, in this case was a MIX that I just dedicated to myself, I like to have a mix for my self so I can have an idea, how the mix sound and it's a fun as well. 2. I'm hardwired to the headphone out of the desk as we didn't have an extra pack for my CUE, unfortunately. 3.Yes I'm sending the CUE out from the desk to Reaper where I was doing MULITRACK Recording as well of the entire band.

Thanks for watching and the support as always

I don’t own a lot of equipment so don’t use one

thanks for whatching this video. ON SMAART V9 SUITE: 1. go to OPTIONS 2. PREFERENCES 3. Tab API 4. Press Enabled in the Server window 5. IP address needs to be in the same range of yout PC/MAC where you have companion NOW ON THE COMPANION WEBPAGE: 1.Insert the IP that you see in the SMAART SUITE API PAGE under the voice TARGET IP 2. TARGET PORT write the target port number 3. Password can be blanck if you didn't put a password in the API page 3. Press SAVE You should be good to go

That's my stream Deck, look up in my channel I made a few video about it

I will try my best as always :) I have a few things plan for this new year

thank you for watching, this is the link amzn.to/3vHEB7g - PETZL Unisex's Caritool Accessory for Climbing

No that's the warehouse of one of my Clients.

Thank you so much for watching

Thanks for watching as always!

@@imdomtrotta well you always have great videos so What else will I do😂

Hey thanks for watching, this si the one that I used 👉 RoutersWholesale - STK-RACKMOUNT-1RU - Rack Mount Kit for Cisco 1RU - amzn.to/3SfzOCV ( I used this to rack the Octa Capture)

all good bro!! Long timeeeee!!! hope you are good!