Car Man Dan
Car Man Dan
  • Видео 2
  • Просмотров 54 792
How to Install Front LED Indicators/Turn Signals (NO ERRORS!) - BMW F10/F11 (5 Series 2010 - 2017)
A quick guide I've made on how to install LED bulbs into your indicators on your BMW F10/F11. Steps are probably similar for many other BMWs but cannot guarantee!
This also works as a guide on how to change like for like, and will not work for those BMWs that already have front LED indicators.
Any questions, please ask - and I'll do my best to answer!
Bluetooth OBD Reader
www.amazon.co.uk/gp/product/B073XKQQQW/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Bimmercode App
bimmercode.app/
LED Indicator Bulbs
www.ebay.co.uk/itm/2X-CANBUS-PY24W-5200s-100W-CREE-AMBER-LED-TURN-SIGNAL-INDICATOR-BULBS-ERROR-FREE/253141821780?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Song: MBB - Ocean (V...
Просмотров: 16 900

Видео

How to Install LED Dip Bulbs (NO ERRORS!) - BMW F10/F11 (5 Series 2010 - 2017)
Просмотров 38 тыс.4 года назад
A quick guide I've made on how to install LED bulbs into your dip beam on your BMW F10/F11. Steps are probably similar for many other BMWs but cannot guarantee! This also works as a guide on how to change the dip beam bulb to halogen, and will also likely work for HID/Xenon. Any questions, please ask - and I'll do my best to answer! Bluetooth OBD Reader www.amazon.co.uk/gp/product/B073XKQQQW/re...

Комментарии

  • @phillipfish8011
    @phillipfish8011 Месяц назад

    So cool

  • @mantasdanielius3469
    @mantasdanielius3469 7 месяцев назад

    Your link for the bulb holders is no longer working , i just waited a week for mine to arrive and thery didnt fit , could kindly find the right ones and post a link here ?

  • @rafh2753
    @rafh2753 Год назад

    Illegal to use within a halogen reflector casing due to the light pattern. Please don't do this, it sprays the light and dazzles drivers. If you have stock xenons, this upgrade is perfectly safe and legal.

  • @Sorin.Mitoaca
    @Sorin.Mitoaca Год назад

    Hi, what OBD you use? What phone you use to conect? iPhone or Samsung ? I have iPhone and i didnt find one OBD compatible with IPhone

  • @Dan-lm9uq
    @Dan-lm9uq Год назад

    Are they py24w?

  • @mehdim-d-c5268
    @mehdim-d-c5268 2 года назад

    Is this led has 35w ?

  • @charlieblvd5384
    @charlieblvd5384 2 года назад

    Would be great without the music.

  • @C4ShiSx
    @C4ShiSx 2 года назад

    How on earth you put metal fitting plates on them?

  • @next9777
    @next9777 2 года назад

    Hello ! Please make a video in dark, i want to are the difference, i have a BMW f10 bixenon, and i want to update to led ! 😎

  • @dan6696
    @dan6696 2 года назад

    Hi do you know where you can still purchase the bulbs and clips ?? Thanks

  • @nal9088
    @nal9088 2 года назад

    Can you kindly explain to me what's the difference between your led with conversion or the led without conversion? I mean the square part between the led and connector.

  • @tsarukyan96
    @tsarukyan96 3 года назад

    hello I would like to know if it is compatible with the series 4

  • @ianthomas4916
    @ianthomas4916 3 года назад

    I replaced my F11 halogen bulbs with a pair of Novsight H7 LED headlight bulbs last year. I didn't even switch them on as I couldn't fit the round plastic cover back on to the headlight assembly after replacing the bulbs. I noticed your LED's were a similar size/shape to the Novsight LED's but your video only showed the cover on and not the process of putting it on. There's no way a cover can fit with the replacement LED lights in. How did you get round this?

  • @abidnaz3785
    @abidnaz3785 3 года назад

    hi I have 535i xdrive 2013, it says left turn signal malfunction please help, greenflag92@gmail

  • @w_khan7247
    @w_khan7247 3 года назад

    just ordered this. do they flash for voltage checks? should i turn off hot and cold monitoring as well?

  • @johnmccarthykarting
    @johnmccarthykarting 3 года назад

    Hi did you change the angle eye bulb to led?

  • @darekkonieczny4349
    @darekkonieczny4349 3 года назад

    LED to led replacement. You can see the change of LED bulbs to other LEDs.

  • @mannyb-ball5417
    @mannyb-ball5417 3 года назад

    Dear friend, thank you very much for this video. It heleped me a lot. And have one more questinon. What type of bimmercode do you have? Is it something speical? I need to code the steering angel sensor, beacuse i had to replace it. I can see in your app in control Unit section - Steering Column Control Unit. I think, this is what I need for new steering sensor coding! But do not have this possibilty in my bimmercode app. :-(

  • @johnmccarthykarting
    @johnmccarthykarting 3 года назад

    Hi just watched your video and new subscriber could you please tell me do I need a paid version of bimmercode to code the led thanks

    • @inspired_by_bimmer267
      @inspired_by_bimmer267 3 года назад

      yes,you need full version of bimmercode or carly app.Carly is for coding as well

  • @colcol172
    @colcol172 3 года назад

    I realize it's 8 months old now but can you remember what clips you got for the LEDs. Been looking at there seems to be sever types that look similar. Cheers

  • @SirChiefUK
    @SirChiefUK 3 года назад

    Thanks very much mate for sharing your process. How bright was the bulbs on actual road? Also, that bulb is really difficult to find as the most common are below 100W and below 20K Lumens...

    • @maxl7827
      @maxl7827 Год назад

      Dont look at the watt and lumen numbers, they dont tell what is the best bulb. Also do not go above 55W per bulb.

  • @TotallynotSophi
    @TotallynotSophi 3 года назад

    ruclips.net/video/nnD_sDWNjEw/видео.html four sided leds are no good!!! Check out link guys!!👍

  • @TotallynotSophi
    @TotallynotSophi 4 года назад

    Which way do LED headlights go in? 2-sided LED headlights for single beams should have the LED chips facing left to right. 2-sided LED Headlights for dual beam applications will have a shield which should always be sitting below the low beams chips. The orientation must be side to side for optimal results.21 Jul 2017

  • @TotallynotSophi
    @TotallynotSophi 4 года назад

    Fantastic, I couldn’t fit the backing plate on before , many attempts, cut knuckles and temper tantrums, and then you just said you glued them on before installation!😂 brilliant, I will attempt it again!👍

  • @TotallynotSophi
    @TotallynotSophi 4 года назад

    Hi Dan great clear video, I have 2 questions please, firstly where did you buy your new LED indicators from ? And secondly do you know if the wing /side indicators are led as standard or are they bulbs as well?.. many thanks, Ben. Bmw f10 520 d. 2011.

  • @brand1986s
    @brand1986s 4 года назад

    Hello would this work for all led bulbs or i will have to buy the same as yours?

  • @Ali78699
    @Ali78699 4 года назад

    Just a couple of quick questions 1) is it necessary for all the bmws which in my case happens to be the 520d msports f10 to have hid bulbs?what if they are HID with ballast and all can they be replaced with leds and would the ballast have to be removed ? 2) would you need to code the leds anyway? Because some of them say no coding needed error free etc online, and why did you code yours since they were working anyway when you tested them. 🙂

    • @mahirislam7080
      @mahirislam7080 4 года назад

      On your dash you will get error messages such as “dipped beam failure” although they are working fine. Coding them on won’t give you that message

  • @AmandaCardona
    @AmandaCardona 4 года назад

    Wow I just replaced my fog lights from stock to Alla Lighting LED , very impressive .

  • @dragosnmd2219
    @dragosnmd2219 4 года назад

    Nice video mate, i found similar like you on ebay £20 , I'll go for it, thanks

    • @carmandan5414
      @carmandan5414 4 года назад

      Dragos Nmd great stuff mate, they make a big difference to the look of the front end - let me know how you get on and if you have any difficulties!

  • @nrilstone
    @nrilstone 4 года назад

    Hi mate, thanks for the video. Can you confirm what bulbs you went with? The colour looks great.

    • @carmandan5414
      @carmandan5414 4 года назад

      Nath Richard hello mate, not a problem - glad you found it useful! The headlights I went for were these ones; www.ebay.co.uk/itm/4-Sides-H7-LED-Headlight-Conversion-KIT-200W-40000LM-Bulbs-6500K-White-Canbus-/264583862060 Slightly bluer than the OEM Headlights you get on the HID units in these cars but still a beautiful white - definitely worth doing

    • @matthewreynolds7847
      @matthewreynolds7847 3 года назад

      @@carmandan5414 hey mate I'm look at switching my dipped to led like you did. It's a mine field to choose so wondered if you had the model and brand you bought? The eBay link doesn't work anymore. Thanks in advance

  • @patrickndiziye4156
    @patrickndiziye4156 4 года назад

    Hi, I've just bought the LED bulbs but I'm worried that 40000k lumens is too bright

    • @carmandan5414
      @carmandan5414 4 года назад

      Thanks for your comment - it’s not likely that the bulbs will be that brightness; a lot the ones sold online are stated as being ridiculous brightness but in reality are much lower. To put into context, the sun itsself emits 10k lumens per square foot - so for bulbs to emit 4x that is a big claim to make!

    • @patrickndiziye4156
      @patrickndiziye4156 4 года назад

      @@carmandan5414 thanks for your help. I also watched your other video to do with the remap and carbon clean and I plan on getting that done too

    • @carmandan5414
      @carmandan5414 4 года назад

      Patrick Ndiziye nice one dude! The remap made such a difference - having a big heavy car like this hit a tad over 6 seconds is insane when you consider they’re powered by a 2.0 diesel! Enjoy mate

  • @TriNguyen-co6ju
    @TriNguyen-co6ju 4 года назад

    I tried twisting my cap off but it is so hard

    • @carmandan5414
      @carmandan5414 4 года назад

      Tri Nguyen the indicator cap? It can be a bit tricky if you’ve not removed it before - I guess just make sure you’re twisting it the right way, and perhaps try using something to help you get a better grip on the little ridge.. pliers could work if you’re careful!