Видео

LOL. You are group breaking a single box????

This product bites ass. 3 hats, retail at 75 each. A scratch off that you will win nothing and a worthless pack of base cards.

I was completely cringing when you removed the back from the panel. All the light filters and polarizers falling to the floor and you nearly stepping on them. I could swear the screen lifted as you lifted the back and I could swear I heard the panel crack.. Now there will be dust stuck to the polarizers and there will be little spots all over the screen once the set is done. You'll never get all of that completely cleaned off. there's always 1 spec of dirt in there somewhere that will affect picture. It appears the best way to remove the panel is to take out all the screws and then tape the frame together. Then Invert the tv so the panel is facing up. You then remove the tape and suction cup the panel off and laying it on a flat clean surface. then tape together all the separate polarizers at the corners and remove them all at once and set them aside. then you can complete the lamp exchange., Your method on this set is fraught with danger of cracking the panel at every turn.

its work on a 55x800g?

its work on a 55x800g?

its works on a 55x800g'

👍👍👍

Let’s GOOOOOOO!!!!!!

What site are you using for this randomizing? Thinking of doing some breaks myself!

Sick Witt man! Thanks for the break!

I shouldn't have traded the Orioles 😆 Nice break!

At 25:23 the clear sheet you take out, I did not mark mine top and bottom! Is this piece directional sensitive? Can you tell the difference to determine which is top or bottom?

💔 *Promo SM*

Very pathetic 😮

I saw a better way to do it as i was researching for some time before doing it. While it is with display down you can unclip the white bezel and remove only the metal chassis. This way you will not touch/remove the whole display package with the LCD/diffusers/QD/etc. You can actually break the LCD this way, have the different layers messed up and have a lot of problems later adjusting them if you at all manage to not break the LCD

'promosm' 💘

Very bad replace and repair backlight

Got a hold of an LG 43" 4K, and no picture! But there is sound when the unit is powered on. When there is no audio signal coming into the unit, should you hear white noise? I didn't find any manual control buttons on the back or edges (just the small on/off button on the middle bottom edge). I suspect the backlight LEDs. Thank you Also if a small section of the screen is broken, can that keep the screen from coming on? The broken area is about 4" long & 1" wide (or so), at the upper edge of the screen. Thank you 🤓

Good info, i am looking for the back lights for a KDL40R470B Sony Bravia any help here would be appreciated.

I have an XBR-65X900C that has the 4 blinks problem. I got it to start up and mostly work by changing the LD_ERR pin 2 to pin 9. The previous owner put it in unconditioned storage for a year (causing thermal expansion of the solder joints) after which it stopped working. If I keep it down to brightness level 6/50, only one LED is bad, but turn it up and the rest start flicking on and off. Could I take out the backlight strips and hit them with a heat gun/hair dryer? I'm not skilled at soldering so I'm not sure if that would ruin anything with the flux or not. Honestly I think I would just wait out until I'm ready to spend the money on new backlights and then try this first.

I am sorry but producing a video takes some understanding and skills in showing what you are doing to the camera which is your audience and all of what I have seen is what a producer edits out. It takes days to make a short 19 minute video without the things that do not belong in the video, like answering the phone, etc..

I did this repair and the same thing happened to me. It was dark and the picture was messed up on one side. Backlight error was fixed but now I have a new problem. What did you do to fix it?

I have A Sony XBR75 910C that has error 4 blinks. I understand that the solder gets weak or led fail in these. What is current cost to replace LED strips, considering I can even find them for my set? Thanks much for your time and sharing your info.

thank you very much for this beautiful video. unfortunately it didn't work for me. after replacing the backlight still 6 blinking. what could be the problem?

thank you very much for this beautiful video. unfortunately it didn't work for me. after replacing the backlight still 6 blinking. what could be the problem?

Good job How much cost the light and labor they are all around or buttons and top only 🤔 thanks 😊

Good job How much cost the light and labor they are all around or buttons and top only 🤔 thanks 😊

Sir if tv blinking green and orange why

Good work. You shave some steps and hours off of the way I do it. Which means faster repairs and lower rates. I think people will like that. If I may offer some advice on your camera positioning. In a technical instructional video such as this a key reason for viewers to view it is to learn how to do what you are trying to teach or demonstrate. While the running dialog is important in explaining what you are doing and why, this is after all a visual medium and therefore it seems a shame to let slip such a perfect opportunity to also show what you are doing. When you have the camera pointed in your general direction but not on the work you are doing, you are forcing your verbal description of the procedure to provide all of the detail that the viewer will need to understand what you are doing. If you would instead focus the camera on the work piece you could make full use of both the sound and video modes of getting your information out. At 19:25 you say something about "if you break them that's the end of the TV." With this warning it seems especially desirable to have a good view of what is being done to avoid breaking them. This is only one example but it seemed perfectly on point. Just one old engineer's advice, but you do you.

How did that call to Topps work out for you?😂

This had to be one of greatest days of your life lolololol Be blessed man

hey if you still have the isaiah card ill make a deal

the silk is a relic.

FUCKIN SICKKKKK!!!!!!!

@Mikis402 You could join or if your apart of my trading site.. we could have a trade on there benchtrading (search it on google) It's a popular site that does a lot of sports card trading and buying. I've used it for 7 years and have made roughly 1700 trades. my id on there is the same

@zlw1 how would we trade the jerseys?

yea we might have to trade ill talk to you about it soon

@Mikis402 Cool. I still have the Kelly Johnson Jersey if your interested in trading for it.

i have a billy butler kansas city royals home jersey and a jay bruce Louisville bats alternate jersey for trade

@theprofessional805 I have them all. Looking for things from my wantlist in the original description.

Hey would you trade your 2011 Topps Triple Threads base (/1500)?

this stuff is a good deal, the base looks crappy but for $21 id buy a case

Nice box of threads, man!

HOLY SH1T

congrats man id be running around the room but thats me!

nice pull!CONGRATS~!(:!

@svtkilr Lucky horseshoe for one box.. after that, I'd get trash.. That Vernon Wells scared me in the first pack.. Thank goodness for one of the product hits to make up for it!! :)

Nice not very often you find another rockets fan

that is some nasty patches man conrats on a EPIC PULL!!!!!!!

thinkin 5 to 7 hundy