Видео

Do you have problems with rodents getting in and damaging anything?

I think you might have better success if you lowered the left side of your box blade several inches. Or more appropriately, raised the right side a few inches to achieve a tilt with the left side lower.

2:30 you should show videos on how “you do , not how to do videos.

sharp rig

I HAVE A B26 KUBOTA TLB AND A RCR1260 ROTARY MOWER (BRUSH HOG) HEADED MY WAY IN A FEW DAYS. CAN'T WAIT TO MOW DOWN THE 5 ACRES OF SAGE BRUSH AND CHEAT GRASS ON THE HOMESITE.

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your CFMOTO UFORCE 600 ( if your car year is 2024

Park to neutral--> neutral to Low is my solution. As long as its one swift motion it works every time. Havent had issues with getting into Reverse, but employing that same technique should work fine.

4X4 and L gear works for me all the time. The steep downhill thing is what brakes are for. You cant expect a CVT belt drive to not runaway on these really steep drop offs. Its not a racing or baja machine those dudes are more than 30K. Used for work and pulling a 1000 Lb trailer (with a load) on fairly flat ground is the duty for this UTV

8 strand electric wire, 8 feet tall. No more problems.

Deer are really funny about their feet, come up with something on the ground.

Are the lights dimmable? Might be a solution if they are too bright. Nice fancy wire connectors. They looked easy to use.

Looks good! I like it! I’m going to use my echo river power station for my lights. I’m considering adding a solar panel to recharge it.

I love mine, I plow my 300ft 2car wide driveway up here in NH with No Problem.

Cant be at a good 4 wheeler for getting the job done.

How noisy is your unit 1 quiet 10 being loud

What’s with the bright triangle?

looks like fun when you have a capable vehicle.

Only strange thing is you weirdo

I dont see anything strange.

What's strange?

Thinking of getting one of these and watching many videos about them. It would be nice if someone would film changing the gear oil and inspecting and adjusting the valves. I think the dealer will charge an arm and a leg to do the servicing. Did you change your own gear oil and adjust the valves? Also where did you get the windshield from? Thanks for the video.

Looks good, making good progress.

Waste of time he’s a joke

It’s getting there! Looking good! Keep it up, you’re inspiring me to get moving on my project.

Hunters and homeless vagrants.

I don't like seeing trash anywhere. I've always picked it up and transported it to a proper waste receptacle.

What?? Zero likes and 118 views. You deserve at least one “like” if for no other reason than not slicing your finger while cutting the 2x4..😅 construction is hard. By yourself more so. Enjoyed your content.

Practice makes perfect, thanks for video. I really like seeing your progress.

Yes happened to me last summer. My tank thankfully passed and it got refilled.

The re-cert is a joke where I am. Some $13/hr kid at the tractor store looked at the date, hit it with a rubber mallet, rub the valve and stamped new dates. Gooberment standards

I have, just got the 30lb . Recertified. Just swop out the 20lb. At a gas station. I pick up old one's all the time that are outdated. And swop them out. You would think in 2024 people would know these things.

A tiny bit of filler a little spray paint then a Dremel, engraver, or stamp/chisel and you are back in buisness in a pinch if you can't afford new ones. Sometimes you just need to go somewhere else. If you catch a refill stations when they are busy especially if it is cold and windy and you keep them distracted just enough they will forget to check and fill them. Using a Tank exchange site instead of a fill station is a good way to keep your tanks current. I know that it cost more and you are usually shorted a Lil gas but going and swapping a tank every couple of years means you only buy tanks one time and the tanks in your inventory are in good shape. That mainly applies to grill tanks but some places have been known to 100# tanks prefilled too because they don't actually full them on site for various reasons. Think farm and feed type stores. Works with oxygen and acetylene too.

I used to exchange at Fred myer a friend said have them refilled at Freddy's it cheaper took to get refilled fredy said tanks were to old to fill so I had to exchange instead of a refill dam fredy your name is on the tank

Its pure safety dont want a weak tank from being old imagine filling one and it blows up i imagine thats not fun...and mayjor inconvenience but i dont blamw them

yep really cracking down in Ohio. I think they said 15 to test and re cert but I dont know if thats for an extra year or how long.

It’s every 12 years and sometimes a bottle says 10 years they need to be recertified take it somewhere to get recertified. The one that is painted cannot be recertified because it is too dark paint a light color and it will be fine to make sure all data is legible on the caller and if they say they can’t fill it, they’re bullshitting

Try taking it to a different station. Some employees don't bother checking the date.

I used to be certified to pump propane. 8 hour class and test. The first thing we were told to check was the date. It made a lot of people mad. I got one recertified once and it looked awful but still passed. It's cheaper than buying a new one.

Do propane tanks have to get pressure tested every five(?) years like fire extinguishers?

12 years fresh then re certified every 5 after that

Just take to gas station and exchange

Here in Nevada (but I expect other places as well) many places don’t actually fill the tanks, but a store employee with a key unlocks a cage on the outside of the store and they exchange your empty bottle for a full one. Never seen them check the age of the bottle, it probably doesn’t matter because they’re not filling yours.

I ran into this problem, 20 years ago. Just depends on the town, the state and the person. Nothing wrong with having tanks recertified. Like their owners, they only have one life and it’s only for so long. Trade your 20 pounders out to blue rhino. It’s cheaper than buying a new tag or getting recertified. Crap now I gave out my secret.

I've never heard of a regular propane attendant giving 2 shits about the age of the tank 😂

When I got a tank that's no longer capable of being refilled I just take it to one of those propane exchanges and get a new tank for like 20 bucks, and you get a fresh tank of propane

Huh?

Yeaaa - happened 2mee in CA they showed mee tha date stamp Offered mee a discount on a new tank. I bought the new one .. only 16- dollars. Not so bad. An old tank - could be cut & welded in2 a little wood burning stove.

Working with welding gasses, nitrogen, and freon, all tanks have a life and get pulled out of circulation for remanufacturing or get destroyed eventually. Same with some fire extinguishers. It's worth the safety for the rare instances leaks near open flames cause hell. (Or extinguishers leaking down and out of pressure when needed)

PP, Nylon, buy really the best would be HDPE, That stuff is used as wear plates in certain applications.

I've got the same issues. That's the only thing that pisses me off about this machine. Had them adjust whatever they adjusted but it's the same. I got stuck going uphill. Could not get it into reverse. Had to get out and push it like a Gorilla. Finally got it in reverse. For a brand new machine this should not be an issue. I always park it in neutral and use the park break.