Видео

Terrible video quality

is it just my video or are they all blurry af? I can't see jack

I just finished the project. I had a hell ofh a time putting the pins back into the door handle. No slack to work with. Found that if I did not put the new pieces on the handle until after I had the connection with the handle in it was easier. It still took many tries. I think the cables were a fraction short. I know one was, because we had to shave some plastic off to get a little more slack.

Does any 3/16 rivet work or do I need to know more specific size grip range and flange diameter? Thanks

Nice your door is open, mine is shut, what now?

I want to see a way to install the cable back into the upper latch. I noticed you left that out. It is a major booger of a challenge as the upper latch does not come apart to help install the cable end back in place. Its not a pleasant job. Pisses me off.

Doesn’t show how the cable goes in….

Thank you Sir for the advice .It help me a lot to save me some bucks and do it myself 👍👍

Clear instructions, to the point, just could use a bit better focus on the camera, though I was able to follow the steps.

I just completed this process in my driver side access door. It wasn't TOO bad but still not fun, lol. I used a knife rather than sandpaper to skin the plastic cable housing to allow the metal pieces to slide onto the cable. I almost had a real problem when I decided to "test" the latch by manually actuating the door latch with a screwdriver. When i did this all seemed well until I closed the door itself and the bottom latch would NOT close. The top latch was fine but the bottom would not close. What happened was that the latch did not fully open back up all the way by simply pulling the door handle. I had to take a screwdriver and snatch it open all the way to allow the door to close on the bottom. So just be careful and be aware of this if you decide to test it manually without actually closing the door!

did I miss the part where he fixes the LOCK???

Step one - get a better camera before making videos.

Finally an old guy that knows how to use a tool . These young kids with THIER keyboard fingers, can't use a ratchet for shit. I guess that is because we grew up fixing things, from our first bicycle to the truck/car we drive today.and they grew up typing everything. When I was in school we also had BULLIES that beat up the kids that took typing. I guess there are PRO's and CON's to everything. Thanks for the video and the website to buy them. I love my little ranger,not ready to retire it yet. The new ones look like Fido' s A$$.

helped me out a bunch, thanks!

Would like to see where you attach the cables to the handle on the rear door. Whomever was filming just fimed you and we cant see how you attach the cables.

Exactly the instructions I needed to repair my door. I had the aluminum parts but did not know how to proceed. Your video answered all the questions. Thank you

Bought a set of 8 on Amazon. Had a real problem sliding them over the old cable even after considerable sanding. the opening seems too small. I guess I may try running a drill bit through them before I do the other side.

The video is okay but he stated that the cables ends we're broken at the latch, therefore it might not be necessary to take any parts off from the interior of the door. I had the same issue with my Ranger rear door and only dismantled the door latch and then replaced the ends as noted. Total time for job was 25 minutes. If the top and bottom of cables break in the future then that's a separate issue. And yes my rear door latch was fixed and opened just like new... Wow! 25 minutes and less than 10 bucks for the parts.

Amazon has them for $7.00

Mr. Klamm, today 07/29/2020 I finished a project. Several years ago I had the problem with the cables on my 2001 Mazda B3000. I purchased the parts you make and sell. I don’t use the truck as much so I kept putting off the repairs. Well today I started and finished the project. Your parts are perfect. Thanks for making his instructional video.

The cables need replaced front and back door handles where can I buy them. Thank you

Great video. Very helpful. Thank you.

Would be better if focused

overall a good video,a must watch before starting this project!!!! but does over look a couple key situations that ended up taking some time especially on the first handle. the main missed point is reconnecting the cables to the handle. look to see how the cables connect inside the handle that way you get an idea of how to do it. b'c once trying to connect its very hard to see what needs to be done. my steps: --i connected both cables to the handle (can be a tricky, need good finger movement), then locked down the metal ends with the clips and then work the handle into position on the door (test!!!) and then riveted into place. took me a couple of hours to do both doors, second door was much faster, of course.... taking off the freaking interior panel wasn't pleasant either....definitely worth doing yourself.. can't imagine how much if paying someone..

I hope you guys are still answering questions. I just ordered a set of these ends for my 2002 Ranger. Question is, what if the 1 or more of the end are not broken. Do they slide off? What is the procedure for this. I hate to go into the door only to fix 1 end and hope the others last longer than I plan on keeping the truck! LOL

Thanks to your video I just ordered a kit off of eBay Ford Ranger Back Door Handle Latch Cable Repair Kit 8 ends fix 2 door trucks. In my head I was thinking of a way to design some sort of sleeve that almost looked like what I ordered so to give props to the inventor who designed it before me...I ordered a set! Thanks for the video! I tried your link but $38 was way higher than I wanted to pay and found a set of 8 for just under $10

My plastic snap on part broke. I'm screwed

Thats some blurry shit!

Do you make a kit for the E-series vans? I have 96 e-150, and all but the driver's door is fouled up. I'm just waiting for the other shoe to drop and then i won't be able to get in this thing at all. 😲

I just went to ebay and bought the aluminum kit, if they work they last for ever

looking for the cables to fix the doors

Great tips. How were you able to upload the video from a potato?

Could not open the rear door on my 03' Ranger. The cables on the door latch seemed okay. Found a small opening on bottom front side of door and sprayed it full of WD40. Yanked on it a few times and it popped open!

I wish I would have seen this video before buying the chinese ones. They didn’t work

Yea thanks you did not show us how to do the top

FuF

Does the kit work on a 1998 Mazda PU as well, both of my doors are stuck closed. it look the same.

This here is the best way to fix your failing cables.

I bought your kit, but can't open the door to start working on it. My cable broke down at the bottom latch. How can I access that bottom latch to release it? Is it possible to remove the door panel when the door is closed? Otherwise, I can't access the lower latch t release it. Thanks

Thanks Sr. I' ll get my doors fix thanks to you, GOD BLESS YOU.

My problem is the bottom latch wont lock shut door opens no problem but opens on bottom when i turn a corner any ideas

I had my drivers side fail last week, but the repair parts you're suggesting won't work, well one anyway but I did find the correct ones.

Where do you get the latches and what do you called them.

Wow I came to the comments to see feedback and see if it works. All I see is people knocking this guy for poor cam and other negative comments. Take your chit to the shop and get the screwing you deserve. No wonder this country is in such sad shape!

great stuff! just fixed both doors. Very easy... albeit a royal PITA, but easy. highly recommended. Positive feedback given on ebay!

I think it's hilarious that these videos are showing how to fix the problem but they're not actually showing you how to open the problem start with to fix the problem you got to open the door the problem is that obviously if the door is stuck which people are trying to figure out a way to open it how would you do upon going that if your door is locked it's not open like on this video if the door was open we will not be having this problem how do you open the door to start with trust me I've tried all of them and it can't open

video made job easy, purchased your kit and worked great

how come you don't show installing the fitting on the top latch ?????

Great product, worked perfectly. Please note, you get four ends per door, three are the same, one is modified, the modified end goes in the top latch, you do not have to disassemble the latch to install. The end just rotates into position. Also, check the top latch end once you have installed the door handle and everything is in place, I noticed that the end had rotated back out of position due to the cables twisting during handle install. Once everything is in place,Rotate the cable end back into place and gently squeeze with pliers to hold in place and you will be good to go to put the door panel back on.

Good how to video, well knowledged guy, but a little blurry. Thanks for the info!