Видео

Hello! Thank you for watching my video and commenting! I really appreciate it! As to your question, no I personally don’t smoke in the rain. My buddy does but he has an enclosure that protects the smoker from getting wet. I do not have that. I used to remove all the pellets out of the hopper and the auger but I also have since stopped doing that because I frequently check the pellets and they are completely dry. I do HIGHLY Recommend getting the pit boss cover. They are made extremely well and they are thick material. I believe that I did my initial burn in with the sear option in the closed position. I hope this helps. PA

Thank you for watching my video and commenting! I really appreciate it! I am so glad that the video helped you. That’s why I make them just so hopefully I can share what I learned with others like yourself. PA

@TomStuart-if2xi what are you starting to reload? I have several videos on RUclips that get into reloading. I think that it is good information. Just checkout the other videos on my channel. You might find more helpful information. Thanks again. PA

@ Bought a simple Lee Loader in .38 Special, probably going to go with 148 grain wadcutters to start with.

Thank you for watching my video and commenting! I really appreciate it! Well as far as the smoker goes, It really depends on the size of your family who you will be cooking for. I have a family of five and it is plenty big enough. $399 is a steal! I wanted mine for the summer so I paid$ 550 the 1150 is really nice but it was too big for me. The other thing is Pitt boss uses 14 gauge steel which is thicker then the trager. Also it has a great front shelf, side shelf and storage on the bottom of the smoker. I might be repeating myself if you watched the video. You can feel the quality of the smoker just by opening the door and feeling the weight. I don’t really use the top shelf at all. At least not yet. The grates are super easy to clean. I use a brush that you dip in ice water and it basically steam cleans your grates. I also remove the main grates and baffles and vacuum out the fire box about every 10 to 15 hours of smoking. It really is easy to do. Takes about 10 minutes. All in all I did a lot of researcher before I bought it and it was built way better than anything else I saw. Do NOT get one from Walmart. There junk. Stick with Lowe’s. I don’t know how handy you are but I wanted to build mine. That way I knew everything was going together the right way. I can also smoke 4 or 5 chickens on it and 3 to 4 7 lb pork butts. For me there is plenty of room for my family. I really hope this helps. Also buy the actual pit boss cover. Its made extremely well. What are they asking for the 1150? With the 1150 you will going to go through a lot more pellets to heat up the size of the chamber. I did a 10 lb pork butt and it took 14 hours, but I only used around 10 or 11 ponds of pellets. Hope this helps and I am sorry my msg was so long. Good luck! PA

I got the 399 special too easy to cook grill and smoke

@allmotorhash awesome!! You’re really going to like it. At the end of summer BJs had the pit boss competition blend pellets on sale for $6.95 for a 40 pound bag!! I bought 600 pounds! Lol. Are you going to build it or did they assemble it? Let me know what you’re making. I almost always set my temps at 250. And then wrap in butchers paper to get through the stall. Really happy for you! You got a really sweet deal! PA

@allmotorhash hello and happy Thanksgiving!! Just picked up a free bone in pork butt with my shoprite points!! Can't wait to get it on the smoker.

@@pareloader5989 it is great, real wood 🪵 for smoking is so much more expensive than a $8 dollar bag of pellets. I spent so much money in clean dry wood.

Thank you so much for watching my video and commenting!! I really appreciate it!! Yeah it’s a great smoker. I highly recommend getting the actual cover from Lowe’s for it. The one that says pit boss. It’s made extremely well. I know that it’s a little pricey but it’s quality. I have done ribs using the 321 method. Beef ribs also. I also recommend taking the membrane off the ribs. I also did a bone In pork butt..came out so good. Next is a brisket. When I did the pork butt I smoked it in a foil pan. It caught all the juices and then after the pork butt was done and shredded, I poured the juice over the meat and mixed it in. Anyway RUclips is full of smoking methods. I am really happy for you. it’s a b@d ass looking smoker? You are going to love it. Oh also it may just my OCD , but if I am not going to smoke for a while, I take all of the pellets out of the hopper and the auger. It’s probably not necessary but I do it. Take care and have a great holiday season!! If you have any more questions feel free to hit me up! Thanks again! PA

@pareloader5989 thank you for the tips! You earned a subscriber! Happy holidays!

@@pewcfpv8056 thank you sir!! Especially for the sub! There will be more smoking videos coming soon. Take care and happy holidays! PA

@@pewcfpv8056 hello again! I am not sure but did you see the video that I posted about the review and features that the pit boss 850 has to offer? If not , that video will definitely help you out. You can just research my whole channel and watch what you want. PA

@pareloader5989 yes I watched that one first actually.

Thank you for watching my video and commenting! I really appreciate it! I will try the Diablo blade. Thank you for the information.PA

Thank you so much for watching my video and commenting!! Really appreciate it. Let me get back to you with your question. PA

@@pareloader5989 That would be great thanks

I also have an over/under. The barrels are braised together so I am a little confused as to how you would use an uncle mikes buy just attaching it to the bottom barrel?

@@pareloader5989 They sell a split connector that goes on each side and then there’s a set screw to tighten it. You need to know the exact outer dimension of that lower barrel where you’re going to be placing it.

@nick32141 okay so now I understand. Well my suggestion if I were putting a swivel on my O/U, I would get a pair of dial calipers and measure the outer diameter of the lower barrel. That’s going to be the most accurate way to measure it. Harbor freight sells them for like $10 bucks. Hope this helps. PA

@@mikewarbin5776 I’m so glad that you watched my video and commented!! I really appreciate it! I’m really glad that my review helped you out. PA

@@mauricioorantes9809 thank you for watching my video and commenting! I really appreciate it! I am so glad that it helped you. I love the older Coleman lanterns. Thank you also for your kind words. Take care and stay safe. PA

@@petemitchell6788 thank you! Really appreciate the info. I will definitely try that. Thank you for watching my video video and sharing your information. Take care and stay safe. PA

Thank you! Will definitely try that! PA

Thanks for watching my video and commenting! I really appreciate it! I will try opening the smoke stack to what you said. The tray under the pan is a great idea! Where did you buy it? Please let me know. Thanks agar for your ideas! PA oh! Thank you for subscribing!!!

@cw2a hey buddy!!! How are you? Yeah it's been awhile since I was on a live stream. I actually haven't been getting any notification that they are going to stream. You hunting this season? Got two squirrels so far. Next hopefully that big buck will come along. Yeah you have to get out there and do some smoking. Thank you for reaching out! Talk to you soon. PA

@@pareloader5989 Not out yet, Im still fishing!

Thanks for watching my video and commenting on it! I really appreciate it! I’m not sure who makes them for cabelas but my buddy has had his for several years now and he has had good luck with it. That’s actually why I got mine. Sorry to hear that you only got a year out of it. I usually pack light anyway. Thanks again for watching. Take care and good luck hunting this season. PA

@vonstroop9866 so glad that it helped! Thanks for watching video!

Thank you so much.for watching my video and commenting!! I really appreciate it! I'm SO glad that you found the info helpful. I think you also just subscribed. If so thank you!! Take.care and stay safe!! PA

@@davidcudlip6587 thank you for watching my video and commenting! Really appreciate it! That’s awesome. You won’t regret it. Like you said it is really nice to be able to adjust it for more clothes or a coat. I adjust mine when I pheasant and dove hunt. PA

Thank you so much for watching my video and commenting! I really appreciate it! Yes I really like my LEE dies. I haven’t been reloading for a little while now just because everything as far as components go. Can’t believe how much primers are. What are you reloading? Several calibers? Let me know how you make out. I always like talking about the reloading hobby. Take care and stay safe! PA

Hello! Thank you for watching my video and commenting! Really Appreciate it. I do the exact same thing you do. When I am reloading I run them through the sizing die one more time. I get better results when I check them in my sizing die after the round is completed. Hope this helps! Take care and stay safe! PA

@@chrisboyne4954 your more than welcome . I am so glad that it was helpful. I just made a 10 lbs pork butt on it using the pit boss competition blend. It was an 11 hour smoke wrapping when the internal was at the stall which was around 165. Bark was very nice, and I took it off at 205 internal and let it rest in a cooler for 2 hours. Came out very well. Thank you again! PA

Thank you for watching my video and commenting. Really appreciate it. Yeah I always bounce about every 10 to 15 rounds just to make sure the beam scale is the same as the digital. I haven’t had a problem with comparing the two but I would rather play it safe. Once that beam scale is set, it will not lie to you. It’s the most accurate scale in my opinion. Take care and stay safe. PA

Thank you very much! Bout time gave detailed video.. 👍 can't say that bout manufactory bid🤫🤫😁

@redskullwarthog9385 I am so glad that it helped. I really like making videos that help people out. I'm no professional by any.means and don't make anything from RUclips. I just have fun and it's kind of a hobby for me. Keeps me out of trouble LOL

@@pareloader5989 first excuse my stupid "User name"...But just started reloading @57 & was in military... Hunting .. Etc. But when prices shy rocketed during covid i decided to do my self...much thx!!!

@@cw2a hello long shot! Yes it’s been awhile. How are you doing? Glad to hear from you. I really have to get back on one of the firearms live streams, I miss it. Just had surgery on my chest to remove a non cancerous tumor. Still left me with a 7” incision. Still recovering from that. I hope all is well with you. Hunting season is right around the corner. Can’t wait for small game to open up. If you’re hunting this season good luck to you my friend. Talk to you soon! PA

@@pareloader5989 yeah I'm looking forward to small game this year myself. Sorry to hear about the surgery. Hope you're doing well. Yeah I got a big scar in my chest as well. Godspeed, the healing.🙏❤️‍🩹👍🏼

@@cw2a thank you brother! You as well. PA

@@jimryanbarker5568 thank you! I really had a fun time making it. When I come to visit in the early fall, I will smoke a pork butt and make pulled pork for everyone. Gluten free of course. Not sure if you know but I am totally gluten free now. Thanks again for watching!

@@iam_treylamar3931 awesome brother! I am really glad that my video helped you out! I get nothing from RUclips, I just make my videos as a hobby pretty much. Just hoping that I can put out videos that help people out. Thanks again! Take and stay safe! Let me know how your first smoking goes and what you made. PA

@@pareloader5989 Same to you brother, I’ll let you know what I come up with. Thanks again

@@JD_49 yeah it’s not perfect. I agree with you. Well I hope that the burn wasn’t too bad. I don’t get anything from Stanley, I just like most of there products. I try to just buy the cook sets that will work for me. Thank you for watching my video and commenting! Really appreciate it. Take care. PA

@@BMFInvoices thank you so much for your comment! I really appreciate it! I really hope that it might have helped you if you own the smoker or were thinking about getting one. It’s really great fun! Thank you again for your support! PA

@@joncavallo4391 you know it! Can’t wait to make some Texas pulled pork. Thanks for commenting! PA

@@HobbiesHobo thanks for checking out my video and commenting! Really appreciate it! Yeah I think that the first smoke will be pork butt. Make some nice pulled pork sandwiches. PA

@@TheCaptnHammer when you zero the scale you are supposed to see zero and a faint white line on the 9. That’s just the way it is. I trust that scale over any digital scale out there. Thanks for commenting. I hope that this helps you. PA

@@sojourn1544 thank you for commenting! Yeah I haven’t either. If you stand the tab straight up it won’t melt in my experience. I know that Stanley went to a silicon one now. Check out my channel. I have more videos on my Stanley cook sets. PA

@@pareloader5989 yeah I like Stanley a lot. The cookware besides being and excellent product it looks good also. lol. I like your pan it’s all seasoned from the campfire and coals. I am watching your vids now. Seems like you give an honest review and great presentation. Not sure what state you’re in but we love your vids here in Evansville Indiana!! lol. Great videos!

@@sojourn1544 thank you so much for watching my video and commenting. Yeas Stanley makes some really ingenious camping cooksets.. thanks for the sub!! PA

Thank you so much for checking out my video! Much appreciated. Yes I absolutely love that knife. 8 can skin out a whole deer with one blade. Glad you liked it. Take care and stay safe. PA

Thanks for watching my video and commenting! Really appreciate it! Yeah BPS makes some really great knives. I have 3 of them and use them for field dressing deer. You can’t beat the price. Also the leather sheath. Way better than a mora. I still like mora but I just don’t feel like the quality is there compared to a BPS. Thanks again for watching! PA

Thank you so much for watching my video and commenting!! Really appreciate it and the sub! I’m glad that it was helpful. Some of my Stanley cook sets I use on a camp fire, others I use on my MSR pocket rocket isobutane stove. That’s why there are no burn marks. I get people that think that I just collect them and never use them because they aren’t all charred. Thank you for the support! PA

Hello. Thanks for watching my video and commenting on it! I really appreciate it. I am not sure of the exact trigger pull weight but it’s definitely much smoother and feels less pull than the stock plastic one. I would highly recommend it if you’re looking for an upgrade. The polymer ones will eventually crack. Hope this helps. PA

Thank you for watching my video and commenting! I really appreciate it! Yes I just never saw the reason to go with the more expensive dies when the LEEs work just fine. Also they were in my budget. I reload 556 and 30 30 and have no problems. I deer hunt with 30 30 and I can really fine tune each round. I also get very consistent groups with the rounds that I load. I haven’t reloaded in awhile due to primers being so expensive. I had a local gun shop near me, really small little place but packed to the hilt. Unfortunately the owner passed away and they shut down shop. Now I’m stuck with cabelas. Anyway thanks again for watching. PA

Thanks for watching my video. Works for me with no problems.

Thank you for watching my video and commenting! I really appreciate it! I’m glad that you hopefully got some knowledge from the content. Thank you! And god bless you also my friend. Take care and stay safe. PA

I just got back from an overnight canoe trip and she went right along with me. Made some great coffee in it. I use isobutane fuel and an MSR pocket rocket. Burns very clean. You should check out Facebook under Jolly Roger paddles. There you can see all of are trips with maps and pictures. Thanks for watching the video and commenting. PA

Thanks for watching and commenting on my video. I did not use a jig. I traced out the end of the stock where I made my cut. Then I used a disc sander to grind the aluminum butt plate. It was a very messy job and didn’t want my camera equipment to get aluminum dust all over it. If you have the tools you can do it yourself. Not really hard just time consuming and a lot of fitting as you go. Hope this helps. PA

Thanks craig! Have a great day and thanks