Thank you very very much ...we have had a leak at that spot and I didn't know how to replace the cartridge (didn't even know it was called a cartridge). Thanks again guys
Thank you. Needed to replace the cartridge on an IKEA glittran mixer tap, another video showed how to access the cartridge and this was very helpful in showing how to take the cartridge out replace it.
@jaapgerritsen84 I managed to unscrew it in a rather amusing way. I used strong tape to wrap around the handle several times while also inserting wooden toothpicks in between layers. These toothpicks provided a grip point for the adjustable spanner. Zero scratches.
I just watched your video and did exactly what you did . Now the water pressure is at a trickle. Any ideas on how to get the pressure back to how it should be. Both cold and hot are producing the same pressure
This is the only video that shows that the handle needs to be unscrewed first to reveal the grub screw. Similar tap but Franke Fuji that I have and no where it shows this although underneath there is the usual small hole but no hexagon key turns anything. Having many fruitless moments I will try it tomorrow. Many thanks.
Thanks mate, love that you saw something missing and gave back to the community by making this. Top bloke. I’ve got one with separate hot and cold taps. Is it the same idea, just need to isolate which one is causing the drip and then replace just that?
I should have watched this first. I had a constant drip on the cold side side so I took my Armal apart and discovered a small piece of rusted screen stuck in the cold side. The individual, small o-rings adjacent to the 2 locating stubs were flat so I bought the 35mm replacement control (non-factory). It didn't seem to fit so I went back to the hardware store and they said you need the gasket kit which doesn't fit on the original mixing valve. So I reinstalled the old and it seals well. So in this video I see that no gaskets are involved. I have the spare mixer and gaskets. I could have saved about 10 Euros. We have good water so the original might last well beyond me. THE ORIGINAL CLOGGING SCREEN CAME FROM THE WATER METER CHANGE BY THE CITY.
Excellent work. My new home has this gooseneck style mixer tap in the kitchen sink and I've never had to replace the cartridge in these style of taps before. Thus didn't know how to pull one apart to get to the cartridge. I didn't even know they're called cartridges in these new taps. As I've only ever replaced tap washers on the traditional hot/cold taps. This video has given me the info I need where to start. Thanks for sharing.
Martin, if you had "LISTENED" to his commentary.... you'd have heard him say he'd already replaced the cartridge earlier and was just (kindly) showing us how that is done. You may apologise 😏
@@TheCJN702 you are right!! Apparently a picture isn't worth a thousand words. Dear All you 'watch' this video.... please listen too, otherwise you will never know that he had already fixed it, and now was doing it all over again to show us how he had done it.......
Where was the fixing, you only replaced it.
10/10 I have the exact same tap.
Very helpful thanks 😊
Cheers 👍😎👍
Brilliant! Thanks for sharing. Just moved into a new house with this exact tap and it's been giving us issues. Your video was really helpful 😊
Thank you very very much ...we have had a leak at that spot and I didn't know how to replace the cartridge (didn't even know it was called a cartridge). Thanks again guys
Thank you. Needed to replace the cartridge on an IKEA glittran mixer tap, another video showed how to access the cartridge and this was very helpful in showing how to take the cartridge out replace it.
Tech talking to him self, action hidden under his hands. Never know when was fault, what corrective action he has taken no idea.
Handel on my faucet is solid as a rock. I tried everything to unscrew it.
Got the same problem. Already fixed it?
@jaapgerritsen84 I managed to unscrew it in a rather amusing way. I used strong tape to wrap around the handle several times while also inserting wooden toothpicks in between layers. These toothpicks provided a grip point for the adjustable spanner. Zero scratches.
I just watched your video and did exactly what you did . Now the water pressure is at a trickle. Any ideas on how to get the pressure back to how it should be. Both cold and hot are producing the same pressure
I finally figured it out! I must of loosened some build up and it was lodged in the aerator.
Thanks u
Thanks for uploading, very helpful
Thank you. Would never had been able to do that without your help :-)
Mate, you saved my bacon. She’s happy again!
This is the only video that shows that the handle needs to be unscrewed first to reveal the grub screw. Similar tap but Franke Fuji that I have and no where it shows this although underneath there is the usual small hole but no hexagon key turns anything. Having many fruitless moments I will try it tomorrow. Many thanks.
you superstar... was looking for a screw on the bottom and was just about to get the plumber in.
Just used your video to fix my Blanco culina tap, you are a life saver, thanks for making it clear.
Very helpful thanks
Thanks mate, love that you saw something missing and gave back to the community by making this. Top bloke. I’ve got one with separate hot and cold taps. Is it the same idea, just need to isolate which one is causing the drip and then replace just that?
I should have watched this first. I had a constant drip on the cold side side so I took my Armal apart and discovered a small piece of rusted screen stuck in the cold side. The individual, small o-rings adjacent to the 2 locating stubs were flat so I bought the 35mm replacement control (non-factory). It didn't seem to fit so I went back to the hardware store and they said you need the gasket kit which doesn't fit on the original mixing valve. So I reinstalled the old and it seals well. So in this video I see that no gaskets are involved. I have the spare mixer and gaskets. I could have saved about 10 Euros. We have good water so the original might last well beyond me. THE ORIGINAL CLOGGING SCREEN CAME FROM THE WATER METER CHANGE BY THE CITY.
Thank you sir
I never comment on RUclips but I had to say thanks for the informative video! Very helpful! J
Excellent work. My new home has this gooseneck style mixer tap in the kitchen sink and I've never had to replace the cartridge in these style of taps before. Thus didn't know how to pull one apart to get to the cartridge. I didn't even know they're called cartridges in these new taps. As I've only ever replaced tap washers on the traditional hot/cold taps. This video has given me the info I need where to start. Thanks for sharing.
No more leaks - Thanks from the UK👍
Well done mate, it all made sense when you showed where the grub screw was hidden.
Yes super helpful
Thank you Sir
Thank you from Canada
Excellent video. Very helpful! Nothing on RUclips for side mounted mixers. However mine (Oliveri) still leaks after replacing cartridge. Any ideas?
Did you ever get fix your leak?
Tighten down the big hex a little more.
Legend thanks
You did nothing to stop the leak. This demonstration only shows how to assemble it.
Watch out - Clare Clare will tell you that you should have "Listened" (as she replied to me earlier)
thnx mate simple easy to follow video
Helped me sort this thank you :-)
το γαλικο το κραταει αναποδα
So undoing it and putting it back together 'fixes' it? No mention of a new cartridge or new seals......
I would never call a such plumber
Martin, if you had "LISTENED" to his commentary.... you'd have heard him say he'd already replaced the cartridge earlier and was just (kindly) showing us how that is done. You may apologise 😏
@@TheCJN702 you are right!! Apparently a picture isn't worth a thousand words. Dear All you 'watch' this video.... please listen too, otherwise you will never know that he had already fixed it, and now was doing it all over again to show us how he had done it.......
Good oe Ausi - Sorted! Thanks Barney UK